Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the SRX2 MH?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Serpent SRX2 MH, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 18T | 4.33 | 10.53 |
| 19T | 4.11 | 9.98 |
| 20T | 3.90 | 9.48 |
| 21T | 3.71 | 9.03 |
| 22T | 3.55 | 8.62 |
| 23T | 3.39 | 8.24 |
| 24T | 3.25 | 7.90 |
| 25T | 3.12 | 7.58 |
| 26T | 3.00 | 7.29 |
| 27T | 2.89 | 7.02 |
| 28T | 2.79 | 6.77 |
| 29T | 2.69 | 6.54 |
| 30T | 2.60 | 6.32 |
| 31T | 2.52 | 6.11 |
| 32T | 2.44 | 5.92 |
Shaded rows are the pinions most 1/10 2WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Serpent SRX2 MH, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Serpent SRX2 MH?
It depends on your motor and the track. In the 1/10 2WD buggy class, racers gear by final drive ratio: 6T and below near 9.40, 7.5–8.5T near 9.22, 17.5T near 6.48. On the SRX2 MH's stock 78T spur that is about 20T for 6T and below, 21T for 7.5–8.5T, 29T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SRX2 MH selected.
What is the internal ratio (transmission ratio) of the Serpent SRX2 MH?
The SRX2 MH has an internal ratio of 2.43:1. Final drive ratio = spur ÷ pinion × 2.43. With the stock 78T spur, a 18T pinion gives an FDR of 10.53 and a 32T gives 5.92.
How many teeth is the stock spur gear on the Serpent SRX2 MH?
78 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 300 cst
- Rear
- 300 cst
What shock oil does the Serpent SRX2 MH come with?
Out of the box the SRX2 MH runs 300 cst front, 300 cst rear (Serpent oil), on 2 x 1.5mm (#500136) front, 2 x 1.7mm (#500136) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Serpent SRX2 MH come with?
The kit springs are 2.65 lb Black (#500223) front, Astro 2.1 lb Blue (#500357) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All 1/10 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Serpent SRX2 MH is in the RC Setup App
Save every setup change you make to your Serpent SRX2 MH, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
