Learn about Ackermann and Bumpsteer, how to adjust them, why you might want some bump in your steering, and how both settings affect a car's handling.
What is caster, and what's kickup, and what's the difference? Learn the basics here, and see how they affect your car's handling.
Camber links may seem simple, but they offer a wide range of settings on most cars, particularly off-road cars, so it's important to understand whether you should be adjusting the rod length, ball stud locations, or ball stud spacers.
Should it be higher? Bigger? Farther back? Don't wing it, bro.
A minor setting, trail can be used to affect how aggressive your steering feels. If you keep changing your trail setting, is it trail mix?
An often overlooked setting, axle height helps you keep your suspension geometry relatively consistent while you adjust your ride height. Read on to learn when to change it and what effects it will have.
Compare the viscosities of various brands of shock oil, including Associated, Losi/TLR, Mugen, Flash Point, Kyosho, Hudy, Yokomo, and more.
Folks at the track calling you Droopy? Maybe it's your suspension, not your disposition. Should you have more droop? Less? Read on for the answers!
Alexander Hagberg walks us through some of the basics of X12 suspension setup theory.
Everyone's favorite Aussie gearhead explains the fundamentals of weight transfer in racing and how it can be used to increase traction or change the front-to-rear relative traction while cornering. In Part 2, he covers roll center and how it contributes to cornering relative to shock springs and shock oil & pistons. A must watch for all tuners!
Alex Hagberg explains how to prep an RC car for racing in the rain. Many of the tips are relevant for all car classes (how to protect your radio equipment, ESC, wiring, and motor), but the setup tips (flex, camber, etc) are focused on on-road touring cars.
Infinity's Jilles Groskamp walks us through the basics of the Ackermann effect and how to tune it in your RC car
Here's an intro to the effect of ride height, that is how far the chassis is from the ground at rest. Learn how being a lowrider can help you on some tracks but hurt on others.
Track width measures the distance from the wheel on one side to the wheel on the other. Learn how it can affect handling here.
Learn why you might want your shocks either standing upward more, or angled down more.
Quick tip explaining the effects of an anti-roll bar on an RC car and when you might want to use a lighter or a stiffer bar.
XRAY's Alex Hagberg explains how to tune the front damping in a pan car using oil on the kingpins. The video is made for the XRAY X12 '22, but applies to any pan car that uses the traditional kingpin setup.
Max Mört takes us through these fundamental settings, and why they do what they do.
Roll center describes how your car rolls in the turns. Here's a quick primer on what it is and how you can use it to tune your car.
How does the distance between the lower suspension pivots affect handling? Read on.