Ask Miles, our Setup AI that’s been trained on the T410FWD.
Stock gearing for the Carten T410FWD, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 36T | 2.00 | 4.94 |
| 37T | 1.95 | 4.81 |
| 38T | 1.89 | 4.68 |
| 39T | 1.85 | 4.56 |
| 40T | 1.80 | 4.45 |
| 41T | 1.76 | 4.34 |
| 42T | 1.71 | 4.23 |
| 43T | 1.67 | 4.14 |
| 44T | 1.64 | 4.04 |
| 45T | 1.60 | 3.95 |
| 46T | 1.57 | 3.87 |
| 47T | 1.53 | 3.78 |
Shaded rows are the pinions most 1/10 FWD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Carten T410FWD, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 FWD touring/gt class, racers gear by final drive ratio: 17.5T near 4.51. On the T410FWD's stock 72T spur that is about 39T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the T410FWD selected.
The T410FWD has an internal ratio of 2.47:1. Final drive ratio = spur ÷ pinion × 2.47. With the stock 72T spur, a 36T pinion gives an FDR of 4.94 and a 47T gives 3.78.
72 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
Out of the box the T410FWD runs 400 cst front, 400 cst rear. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are 20mm Blue (#NHA458) front, 20mm Green (#NHA461) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your Carten T410FWD is in the RC Setup App
Save every setup change you make to your Carten T410FWD, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

