Is your sway bar really set to the same setting on left and right? Check out this video from McTips to see how to make sure your tweak is really set properly, especially for on-road cars.
Max Mört takes us through these fundamental settings, and why they do what they do.
Comprehensive setup guide for touring cars from HUDY with explainers on various settings, how to measure properly, and how to address various handling issues.
Alex Hagberg explains how to prep an RC car for racing in the rain. Many of the tips are relevant for all car classes (how to protect your radio equipment, ESC, wiring, and motor), but the setup tips (flex, camber, etc) are focused on on-road touring cars.
Everyone's favorite Aussie gearhead explains the fundamentals of weight transfer in racing and how it can be used to increase traction or change the front-to-rear relative traction while cornering. In Part 2, he covers roll center and how it contributes to cornering relative to shock springs and shock oil & pistons. A must watch for all tuners!
Jilles discusses centering, weighing, and trimming pre-mounted 1/10th scale touring car tires.
Rajaa111 explains the ins and outs of clutches for nitro cars, and how you can choose whether you want to go with a 3-shoe or a 4-shoe clutch.
Learn how to properly tune the weight balance of a touring car, and how to improve your handling by re-distributing the weight for better front-rear balance.
Alex Hagberg of XRAY talks through track width, its impact on handling, and how to set it via hexes or suspension mounts.
This is a meaty one, so pull up a chair! In this video, learn about suspension inserts and how toe (inboard & outboard), anti-dive, and sweep affect a car's handling, with Alex Hagberg, tuning expert from XRAY.
Jilles Groskamp of Infinity walks us through how he sets his steering angle, from the radio settings to the camber and toe settings that will help you get there.
Infinity's Jilles Groskamp walks us through the basics of the Ackermann effect and how to tune it in your RC car
Alexander Hagberg of XRAY explains the Ackermann angle and bumpsteer, and how they affect the handling of on-road cars.
Patrick Beck of Tonisport walks us through the essentials of Active Rear Suspension systems that alter the car's rear toe as the suspension is compressed.
Getting your T4 ready for the 2020 race season? Learn from XRAY how to get the best handling out of their new touring car.
Eric Anderson demonstrates his techniques for gluing sedan tires, including how to apply glue to the sidewalls to tune the tire side-flex characteristics.
Learn how to build or rebuild your 1/10th nitro on-road clutch from one of the best!