Open DocumentWhat gets replaced most often — full list below.
| Part # | Description |
|---|---|
| 91673 | Front Arm, Gull-Wing, B6 |
| 91853 | B6.2 Rear Arms, 73mm |
| 71144 | T6.2 Steering Block Arms, C.F. (+1) |
| 91481 | 12x27.5MM V2 Shock Bodies |
| 91493 | FT Low Friction X-Rings |
| 91491 | 12MM V2 Shock Rebuild Kit |
| 7677 | Ball Diff Rebuild Kit |
| 6581 | 3/32" Carbide Diff Balls |
| 92286 | Octalock LCF Slipper Pad, 19mm |
| 91820 | B6.1 Ball Ends |
| 91723 | 3 x 48mm Turnbuckle |
| 91475 | 3x7x3 Ball Bearing |
See all 295 parts →
More option parts for this car
Team Associated
RC10 B6.3D
View setup sheets →
Manuals for other versions of this car:
Dial in your setup
Email me about new:
The B6.3D is the rear-motor B6.3. Its list runs alongside the B6.3’s, differing mainly in chassis and transmission parts.
295 parts from the RC10 B6.3D manual, in Associated’s own sections. Quantity is what the car uses, not the pack size.
| Part # | Description | Qty |
|---|---|---|
| 6338 | Antenna Tube & Cap (black) | 1 |
| 25201 | M3 x 8mm FHCS | 20 |
| 31541 | M3 x 6mm FHCS | 10 |
| 91734 | Battery Foam, B6 | 1 |
| 91746 | FT B6 Alum. Chassis Weight, 13g | 1 |
| 91749 | M2x3mm FHCS | 10 |
| 91867 | B6.2 Fan Mount | 1 |
| 91882 | B6.3 Aluminum Arm Mount, Wide (C) | 1 |
| 91883 | B6.3 Aluminum Arm Mount, Wide (D) | 1 |
| 91886 | B6.3 Side Rails | Pr. |
| 91892 | B6.3 Chassis | 1 |
| 92014 | Arm Mount Inserts | 4 ea. |
| Part # | Description | Qty |
|---|---|---|
| 31283 | Ball Studs, Long, 5mm | 6 |
| 91475 | 3x7x3 Ball Bearing | 1 |
| 91656 | Bulkhead, B6 | 1 |
| 91657 | B6 Front Hinge Pin Brace | 1 |
| 91667 | Steering Assembly, B6 | 1 |
| 91678 | M3 x 20mm BHCS, Shouldered | 10 |
| 91685 | Bumpers, B6 | 1 ea. |
| 91884 | B6.3 Top Plate, Ballstud Mount, Steering Bellcrank Brace | 1 ea. |
| Part # | Description | Qty |
|---|---|---|
| 25187 | M3 x 14mm BHCS | 10 |
| 25215 | M3 Locknut, Black | 10 |
| 71144 | T6.2 Steering Block Arms, C.F. (+1) | 2 |
| 91049 | Heavy-duty Ballstud, 10mm | 8 |
| 91150 | M4 L. P. Serrated Steel Wheel Nuts | 10 |
| 91670 | Hinge Pin Set, B6 | 1 |
| 91673 | Front Arm, Gull-Wing, B6 | 2 |
| 91676 | B6 Caster Hat Bushings | 2 ea. |
| 91682 | Front Axle, B6 | 2 |
| 91776 | B6.1 Caster/Steering Blocks | 1 |
| Part # | Description | Qty |
|---|---|---|
| 31383 | Ballstud Washers, 5.5x3.0x2.0mm, Blue Aluminum | 10 |
| 91047 | Heavy-duty Ballstud, 6mm | 10 |
| 91436 | CVA/Wheel Hex Pin, B5 | 4 |
| 91438 | CVA Rebuild Kit, B5 | 1 |
| 91567 | FT Bearing, 5 x 12 x 4 | 4 |
| 91609 | FT Clamping Wheel Hexes, 5.0mm | 2 |
| 91611 | M1.6 x 8mm SHCS | 4 |
| 91737 | M3 x 20mm Set Screw | 6 |
| 91853 | B6.2 Rear Arms, 73mm | Pr. |
| 91857 | B6.2 Rear Hubs | 2 |
| 91859 | B6.2 CVA Axle, +2mm | 2 |
| 91860 | B6.2 CVA Bone, 69mm | 2 |
| 92179 | B6.2 Rear Hub Inserts and Spacers | 1 |
| 92180 | B74 Rear Hub Link Mount | 2 |
| 92188 | B74 Rear Hub Hinge Pin | 2 |
| Part # | Description | Qty |
|---|---|---|
| 31520 | M2.5 x 6mm BHCS | 10 |
| 89208 | M3x14mm FHCS | 10 |
| 91815 | Shock Bushing, 10mm | 4 |
| 91865 | B6.2 Wing Mount, Front | 1 |
| 91880 | B6.3 Front Shock Tower | 1 |
| Part # | Description | Qty |
|---|---|---|
| 25189 | M3 x 22mm BHCS | 10 |
| 91718 | Wing / Body Mount Set, B6 | 1 |
| 91816 | Shock Bushing, 12mm | 4 |
| 91881 | B6.3 Rear Shock Tower | 1 |
| Part # | Description | Qty |
|---|---|---|
| 4187 | .030 Nylon Washer | 12 |
| 31327 | VCS3 Shock Bottom Cap and O-Ring | 2 ea. |
| 31510 | 2x4mm BHCS | 6 |
| 89278 | 2.5mm Washer | 20 |
| 91304 | 12MM Threaded Collar and O-Ring | 2 |
| 91480 | 12x23MM V2 Shock Bodies | 2 |
| 91481 | 12x27.5MM V2 Shock Bodies | 2 |
| 91491 | 12MM V2 Shock Rebuild Kit | 1 |
| 91492 | M2 x 4mm BHCS with Washer | 2 |
| 91493 | FT Low Friction X-Rings | 8 |
| 91495 | 12 mm V2 X-Ring Rebuild Kit | 1 |
| 91590 | FT 23mm and 27.5mm FOX Shock Upgrade with | 2 ea. |
| 91615 | 3 x 21mm Shock Shaft (V2), TiN | 2 |
| 91619 | 3 x 27.5mm Shock Shaft (V2), TiN | 2 |
| 91626 | FT 12mm Pistons (V2), 2x1.6 mm, flat | 4 |
| 91627 | FT 12mm Pistons (V2), 2x1.7 mm, flat | 4 |
| 91629 | FT 12mm Pistons (V2), 2x1.8 mm, flat | 4 |
| 91814 | B6.1 Shock Caps/Spring Cups | 4 ea. |
| 91819 | B6.1 Shock Pivot Balls | 4 |
| 91820 | B6.1 Ball Ends | 1 |
| 91895 | FT 12mm V2 Piston, 2mm [2x1.5] | 4 |
| 91896 | FT 12mm V2 Piston, 2mm [2x1.6] | 4 |
| 91897 | FT 12mm V2 Piston, 2mm [2x1.7] | 4 |
| Part # | Description | Qty |
|---|---|---|
| 91328 | V1 Front Shock Spring, White 3.30lbs | Pr. |
| 91329 | V1 Front Shock Spring, Gray 3.45lbs | Pr. |
| 91336 | V1 Rear Shock Spring, Green 2.00lbs | Pr. |
| 91337 | V1 Rear Shock Spring, White 2.10lbs | Pr. |
| 91830 | Front Shock Spring, Green 3.10lbs | Pr. |
| 91831 | Front Shock Spring, White 3.40lbs | Pr. |
| 91832 | Front Shock Spring, Gray 3.61lbs | Pr. |
| 91833 | Front Shock Spring, Blue 3.91lbs | Pr. |
| 91834 | Front Shock Spring, Yellow 4.30lbs | Pr. |
| 91835 | Front Shock Spring, Red 4.60lbs - KIT | Pr. |
| 91836 | Front Shock Spring, Orange 5.10lbs | Pr. |
| 91837 | Rear Shock Spring, Green 1.81lbs | Pr. |
| 91838 | Rear Shock Spring, White 1.91lbs | Pr. |
| 91839 | Rear Shock Spring, Gray 2.00lbs | Pr. |
| 91840 | Rear Shock Spring, Blue 2.20lbs - KIT | Pr. |
| 91841 | Rear Shock Spring, Yellow 2.30lbs | Pr. |
| Part # | Description | Qty |
|---|---|---|
| 5420 | 10 Weight Silicone Shock Fluid | 2oz. |
| 5421 | 20 Weight Silicone Shock Fluid | 2oz. |
| 5422 | 30 Weight Silicone Shock Fluid | 2oz. |
| 5423 | 40 Weight Silicone Shock Fluid | 2oz. |
| 5425 | 80 Weight Silicone Shock Fluid | 2oz. |
| 5427 | 15 Weight Silicone Shock Fluid | 2oz. |
| 5428 | 25 Weight Silicone Shock Fluid | 2oz. |
| 5429 | 35 Weight Silicone Shock Fluid | 2oz. |
| 5430 | 45 Weight Silicone Shock Fluid | 2oz. |
| 5431 | 55 Weight Silicone Shock Fluid | 2oz. |
| 5435 | 50 Weight Silicone Shock Fluid | 2oz. |
| 5436 | 60 Weight Silicone Shock Fluid | 2oz. |
| 5437 | 70 Weight Silicone Shock Fluid | 2oz. |
| Part # | Description | Qty |
|---|---|---|
| 4671 | M3 x 10mm Set Screw | 6 |
| 25211 | M3 x 10mm BHCS | 20 |
| 31284 | Ball Studs Long, 8mm | 6 |
| 31382 | FT Ballstud Washer, aluminum1mm | 10 |
| 31531 | M3 x 6mm BHCS | 10 |
| 91158 | M3 x 4mm BHCS | 10 |
| 91722 | Ball Cups, B6 | 12 |
| 91723 | 3 x 48mm Turnbuckle | 2 |
| 91728 | B6 Servo Horns, 15.5 mm | 1 |
| 91885 | B6.3 Steering Rod Ends | 1 |
| 91887 | B6.3 Servo Mount and Brace | 1 |
| Part # | Description | Qty |
|---|---|---|
| 31500 | M3x2.5mm Set Screw | 10 |
| 91729 | Thumb Screw, B6 | 2 |
| 91730 | Battery Strap Shoulder Screw | 2 |
| 91731 | Battery Strap, B6 | 1 |
| 91821 | B6.1 Anti-Roll Bar Hardware | 1 |
| 91822 | B6.1 FT Front Anti-Roll Bar Set | 1 |
| 91823 | B6.1 FT Rear Anti-Roll Bar Set | 1 |
| Part # | Description | Qty |
|---|---|---|
| 25188 | M3 x 20mm BHCS | 10 |
| 25202 | M3 x 10mm FHCS | 10 |
| 25204 | M3 x 16mm FHCS Ballstud Washers, 5.5x2.0 mm, 10 | 10 |
| 31448 | M2.5 x 8mm FHCS | 10 |
| 31532 | M3 x 8mm BHCS T6.2 Laydown Motor Plate, Blue 1 | 10 |
| 89202 | M3 x 12mm BHCS | 10 |
| 89203 | M3 x 16mm BHCS | 10 |
| 89218 | M3 x 8mm Washers | 10 |
| 91048 | Heavy-duty Ballstuds, 8 mm | 10 |
| 91132 | 4x4 FT Idler Shafts, aluminum | 2 |
| 91560 | FT Bearings, 5x10x4 mm | 4 |
| 91709 | B6 Chassis Braces | 1 ea. |
| 91716 | B6 Idler Gear, 39T, laydown | 2 |
| 91775 | B6.1 Rear Ballstud Mount | 1 |
| 91791 | B6.1 Laydown Gearbox | 1 |
| 91795 | B6.1 Laydown Motor Plate | 1 |
| 91796 | FT Laydown Motor Plate, Carbon Fiber | 1 |
| 91799 | B6.1 Laydown Top Shaft | 1 |
| 91813 | B6.1 Gear Cover | 1 |
| Part # | Description | Qty |
|---|---|---|
| 25612 | M3 Locknuts, Flanged | 10 |
| 91801 | B6.1 Slipper Spring and Adaptors | 1 |
| 91803 | B6.1 Slipper Hub, Inner | 1 |
| 91804 | B6.1 Slipper Hub, Outer | 1 |
| 91805 | B6.1 HTC Slipper Hub Outer | 1 |
| 91891 | HD Slipper Spring Adapter | 2 |
| 92276 | B74.1 Slipper Spring, 500lb/in | 1 |
| 92286 | Octalock LCF Slipper Pad, 19mm | 1 |
| 92293 | Octalock Spur Gear (72T, 48P) | 1 |
| 92294 | Octalock Spur Gear (75T, 48P) | 1 |
| 92295 | Octalock Spur Gear (78T, 48P) | 1 |
| 92296 | Octalock Spur Gear (81T, 48P) | 1 |
| Part # | Description | Qty |
|---|---|---|
| 1733 | Diff Shims | 8 |
| 6573 | Diff Thrust Washer & Bolt | 2 |
| 6574 | Precision Diff Thrust Balls, 5/64" | 6 |
| 6575 | Locking T-Nut, Diff Thrust Bolt, & Cover | 1 |
| 6576 | FT Precision Ground Diff Drive Rings | 2 |
| 6581 | 3/32" Carbide Diff Balls | 12 |
| 6582 | Diff Thrust Spring | 1 |
| 7666 | Diff Drive Rings, 2.60:1 | 2 |
| 7677 | Ball Diff Rebuild Kit | 1 |
| 8680 | Bearing, 5 x 8mm | 2 |
| 91419 | Diff Gear, B5 | 1 |
| 91701 | Ball Diff Outdrive, B6 | 1 ea. |
| 91702 | Ball Diff Kit, B6 | 1 |
| Part # | Description | Qty |
|---|---|---|
| 5444 | Silicone Diff Fluid 4,000CST | 1 |
| 5448 | Silicone Diff Fluid 80,000CST | 1 |
| 5451 | Silicone Diff Fluid 2,000CST | 1 |
| 5452 | Silicone Diff Fluid 3,000CST | 1 |
| 5453 | Silicone Diff Fluid 5,000CST Silicone Diff Fluid 6,000CST | 1 |
| 5454 | Silicone Diff Fluid 7,000CST | 1 |
| 5455 | Silicone Diff Fluid 10,000CST | 1 |
| 5456 | Silicone Diff Fluid 20,000CST | 1 |
| 5457 | Silicone Diff Fluid 30,000CST | 1 |
| 5458 | Silicone Diff Fluid 60,000CST | 1 |
| 5459 | Silicone Diff Fluid 100,000CST | 1 |
| 5461 | Silicone Diff Fluid 200,000CST | 1 |
| 5463 | Silicone Diff Fluid 500,000CST | 1 |
| 5465 | Silicone Diff Fluid 1,000,000CST | 1 |
| 5466 | Silicone Diff Fluid 15,000CST | 1 |
| 31522 | M2.5 x 10mm BHCS | 10 |
| 91563 | FT Bearings, 10x15x4 mm | 4 |
| 91780 | B6.1 Gear Differential Rebuild | 1 |
| 91782 | B6.1 Gear Differential Seals | 1 |
| 91783 | B6.1 Gear Differential Case | 1 |
| 91784 | B6.1 Aluminum Cross Pins | 2 |
| 91785 | B6.1 Gear Differential Outdrives | 2 |
| 91786 | B6.1 Gear Differential | 1 |
| 91792 | B6.1 Differential Height Inserts | 2 ea. |
| Part # | Description | Qty |
|---|---|---|
| 1335 | 17T 48P Aluminum Pinion Gear | 1 |
| 1336 | 18T 48P Aluminum Pinion Gear | 1 |
| 1337 | 19T 48P Aluminum Pinion Gear | 1 |
| 1338 | 20T 48P Aluminum Pinion Gear | 1 |
| 1339 | 21T 48P Aluminum Pinion Gear | 1 |
| 1340 | 22T 48P Aluminum Pinion Gear | 1 |
| 1341 | 23T 48P Aluminum Pinion Gear | 1 |
| 1342 | 24T 48P Aluminum Pinion Gear | 1 |
| 1343 | 25T 48P Aluminum Pinion Gear | 1 |
| 1344 | 26T 48P Aluminum Pinion Gear | 1 |
| 1345 | 27T 48P Aluminum Pinion Gear | 1 |
| 1346 | 28T 48P Aluminum Pinion Gear | 1 |
| 1347 | 29T 48P Aluminum Pinion Gear | 1 |
| 1348 | 30T 48P Aluminum Pinion Gear | 1 |
| 1349 | 31T 48P Aluminum Pinion Gear | 1 |
| 1350 | 32T 48P Aluminum Pinion Gear | 1 |
| 1351 | 33T 48P Aluminum Pinion Gear | 1 |
| 1352 | 34T 48P Aluminum Pinion Gear | 1 |
| 25225 | M3 x 3mm Set Screw | 20 |
| Part # | Description | Qty |
|---|---|---|
| 9690 | Buggy Front Wheel, hex, white | 2 |
| 9691 | Buggy Front Wheel, hex, yellow | 2 |
| 9695 | Buggy Rear Wheel Hex, white | 2 |
| 9696 | Buggy Rear Wheel Hex, yellow Not included | 2 |
| Part # | Description | Qty |
|---|---|---|
| 91741 | RC10B6 Wing | 1 |
| 91863 | RC10B6.2 Clear Body | 1 |
| 91864 | RC10B6.2 Lightweight Clear Body | 1 |
| 91866 | RC10B6.2 Front Wing Clear | 2 |
| 91900 | RC10B6.3 Decal Sheet | 1 |
| Part # | Description | Qty |
|---|---|---|
| 1369 | FT Alum. Clamping Servo Horn 23T, 15.5 mm | 1 |
| 1370 | FT Alum. Clamping Servo Horn 25T, 15.5 mm | 1 |
| 1405 | FT Titanium Turnbuckles, 3x48 mm/1.89 in | 2 |
| 27128 | Servo Washers, Black Aluminum | 4 |
| 71034 | FT Clamping Wheel Hexes, 6.0 mm | 2 |
| 91494 | FT 12mm Machined Shock Spacers, V2 | 1 |
| 91553 | Factory Team Bearing Kit, B5, B6 | 1 |
| 91588 | Titanium Screws, 3x22mm BHCS | 4 |
| 91589 | Titanium Screws, 3x24mm BHCS | 4 |
| 91591 | Titanium Screws, 3x6mm FHCS | 4 |
| 91596 | Titanium Screws, 3x16mm FHCS | 4 |
| 91597 | Titanium Screws, 3x18mm FHCS | 4 |
| 91625 | FT 12 mm Pistons V2, 2x1.5 mm, flat | 4 |
| 91628 | FT 12 mm Pistons V2, 3x1.4 mm, flat | 4 |
| 91658 | RC10B6 Aluminum Front Bulkhead | 1 |
| 91668 | RC10B6 Aluminum Steering Bell Crank | 1 |
| 91669 | RC10B6 Aluminum Steering Rack | 1 |
| 91672 | RC10B6 Flat Front Arm, Hard | Pr. |
| 91680 | B6 FT Steering Block Arms, +1 | Pr. |
| 91681 | B6 Caster Block Hat Bushings, 0.5, 1.5, 2.5mm | 2 ea. |
| 91683 | RC10B6 Titanium Front Axle | 2 |
| 91699 | FT Aluminum Rear hub Link | 2 |
| 91727 | B6.1 FT Titanium Turnbuckle Set, 3x48 mm/1.875 1 91743 Adhesive Hook and Loop | 1 |
| 91744 | FT Brass Under Battery Weights | 1 |
| 91745 | RC10B6 Aluminum Chassis Weight (9g) | 1 |
| 91747 | RC10B6 Steel Chassis Weight (24g) | 1 |
| 91748 | RC10B6 Steel Chassis Weight (36g) | 1 |
| 91750 | HD Titanium Ball Stud, 4mm | 2 |
| 91751 | HD Titanium Ball Stud, 6mm | 2 |
| 91752 | HD Titanium Ball Stud, 8mm | 2 |
| 91753 | HD Titanium Ball Stud, 10mm | 2 |
| 91754 | FT Graphite ESC Plate | 1 |
| 91761 | FT Graphite Servo Plate | 1 |
| 91781 | B6.1 Gear Diff Cover, aluminum | 1 |
| 91788 | B6.1 Standup Gearbox Req. #91794 | 1 |
| 91790 | B6.1 Layback Gearbox | 1 |
| 91793 | B6.1 Alum. Differential Height Inserts, black | 2 Pr. |
| 91797 | Titanium Top Shaft Screw | 1 |
| 91798 | B6.1 Standup Top Shaft | 1 |
| 91800 | B6.1 Direct Drive Kit | 1 |
| 91802 | B6.1 Vented Slipper Hub, (inner) | 1 |
| 91806 | B6.1 Vented Slipper Hub, outer B6.1 HTC Vented Slipper Hub, outer & center disk 1 | 1 |
| 91825 | B6.1/B6.1D FT Chassis Protective Sheet | 1 |
| 91854 | RC10B6.2 Rear Suspension Arms, 73mm, Hard | 2 |
| 91858 | B6.2 CVA Axles | 2 |
| 91862 | B6.2 Clamping Wheel Hexes, 4.0mm | 1 |
| 91868 | B6.2 FT Bearing Set | 2 |
| 91870 | B6.2 Chassis Protective Sheet (+3) | 1 |
| 91877 | B6.2 Aluminum Rear Hubs, Blue | Pr. |
| 91878 | B6.2 Aluminum Rear Hubs, Black | Pr. |
| 91888 | B6.2 FT Rear Ballstud Mount +2mm, Blue | 1 |
| 91889 | B6.2 FT Rear Ballstud Mount +2mm, Black | 1 |
| 91890 | B6.2 FT Servo Mount Set, Side Rail Mount | 1 |
| 91894 | B6.3 FT Carbon Fiber Servo Mount Brace | 1 |
| 91898 | B6 FT Bulkhead, 25 deg, 30 deg, steel | 1 |
| 91899 | B6 FT Bulkhead, 20 deg, steel | 1 |
| 91902 | B6.3 Carbon Fiber Steering Plates HT+1 | 1 |
| 91903 | B6.3 FT Wing Mount Brace Set, aluminum | 1 |
| 91904 | B6.3 HD Spring Adapters, Carbon Fiber | 1 |
| 91905 | B6 FT Alum. Battery Strap Shoulder Screw, Blue | 2 |
| 91906 | B6.3 Brass Arm Mount [C] | 1 |
| 91907 | FT Laydown/Layback Motor Plate, 3.5mm, blue | 1 |
| 91908 | FT Laydown/Layback Motor Plate, 3.5mm, black | 1 |
| 91909 | 12mm Shock Collar and Seal Retainer Set, black | 1 |
| 91910 | B6 FT Steering Arm, carbon fiber | 1 |
| 92011 | B6 Arm Mount Inserts, 1/0.5 | 8 |
| 92100 | FT Aluminum Wing Buttons | 2 |
| 92185 | B74 FT Graphite Rear Hub Link Shim Set | 1 |
| Part # | Description | Qty |
|---|---|---|
| 1105 | FT Green Slime Shock Lube | 1 |
| 1596 | FT Locking Adhesive | 1 |
| 1597 | FT Tire Adhesive, medium | 1 |
| 6588 | Black Grease - 4cc | 1 |
| 6591 | S.Diff Lube - 4cc | 1 |
| 6636 | Silicone Grease - 4cc | 1 |
| 6727 | Servo Tape Reedy 2020 Sticker Set | 2 |
Free to start · iOS & Android
Your Team Associated RC10 B6.3D is in the RC Setup App
Save every setup change you make to your Team Associated RC10 B6.3D, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
