So Dialed Logo
Parts listSource: Traxxas

Traxxas TRX-4 Parts List

TRX-4

Traxxas

TRX-4

Setup sheets →

Shop TRX-4 parts & upgrades at AMain →Ad

Commonly replaced parts

What a TRX-4 actually goes through — portal internals, axle shafts and steering — with the full list below.

Part #Description
8252Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)
8253Portal drive housing, inner, rear (left or right) (2)
8251Portal drive housing, outer (front or rear) (2)
8257Portal drive input gear, front/ drive pin/ cross pin
8258Portal drive output gear, front or rear
8228Axle shaft, front (left)/ drive pin/ cross pin
8229Axle shaft, front (right)/ drive pin/ cross pin
8230Axle shaft, rear (left)
8231Axle shaft, rear (right)
8232Caster blocks (portal drive), left & right
8246Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)
8247XServo horn, steering, metal/ 3x14 BCS (1)
8243Suspension link, front, 5x100mm (lower) (steel) (2)
8245Suspension link, rear, 5x121mm (upper or lower) (steel) (2)
8262Rebuild kit, TRX-4 shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

Every stock spare part and optional accessory for the Traxxas TRX-4 (model 82256-4), from the official Traxxas parts list. Part numbers link to AMain Hobbies where a match was found; parts with no current match are listed as plain text.

Full parts list

Axle Components

Part #Description
8241Axle housing, front
8242Axle housing, intermediate (TRX-6) or rear (TRX-4)
8227Axle mount set (complete) (front & rear) (for suspension links)
8228Axle shaft, front (left)/ drive pin/ cross pin
8229Axle shaft, front (right)/ drive pin/ cross pin
8060Axle shaft, front, heavy duty (left & right) (requires #8064 front portal drive input gear)
8062Axle shaft, front, heavy duty (left & right)/ portal drive input gear, front (machined) (2) (assembled)
8230Axle shaft, rear (left)
8231Axle shaft, rear (right)
8063Axle shaft, rear, heavy duty (left & right) (requires #8065 rear portal drive input gear)
8061Axle shaft, rear, heavy duty (left & right)/ portal drive input gear, rear (machined) (2) (assembled)
8233Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
8256Portal drive axle mount, rear (left & right)
8256XPortal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS (4)
8256APortal drive axle mount, rear, 6061-T6 aluminum (charcoal gray- anodized) (left and right)/ 2.5x16 CS (4)
8256RPortal drive axle mount, rear, 6061-T6 aluminum (red-anodized) (left and right)/ 2.5x16 CS (4)
8252Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)
8253Portal drive housing, inner, rear (left or right) (2)
8251Portal drive housing, outer (front or rear) (2)
8064Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)
8257Portal drive input gear, front/ drive pin/ cross pin
8259Portal drive input gear, rear
8065Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)
8258Portal drive output gear, front or rear
8252XPortal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)
8252APortal housings, inner (front), 6061-T6 aluminum (charcoal gray- anodized) (2)/ 3x12 BCS (2)
8252GPortal housings, inner (front), 6061-T6 aluminum (green- anodized) (2)/ 3x12 BCS (2)
8252RPortal housings, inner (front), 6061-T6 aluminum (red-anodized) (2)/ 3x12 BCS (2)
8251XPortal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)
8251APortal housings, outer, 6061-T6 aluminum (charcoal gray- anodized) (2)/ 2.5x10 CS (12)
8251GPortal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)
8251RPortal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (12)
8255Stub axle (portal drive) (2)
8255AStub axle, extended thread (portal drive) (2)
8267Weight, portal housing, brass (2) (34 grams)/ 2.5x8 CS (6) (requires #8251X, 8251R, 8251A, or 8251G outer portal housing)

Bearings & Bushings

Part #Description
8214Ball bearing kit, stainless steel, TRX-4 (complete)
8265Ball bearing kit, TRX-4 (complete)
5119ABall bearings, black rubber sealed (10x15x4mm) (2)
5120ABall bearings, black rubber sealed (12x18x4mm) (2)
5102ABall bearings, black rubber sealed (15x21x4mm) (2)
5104ABall bearings, black rubber sealed (4x10x4mm) (2)
5115ABall bearings, black rubber sealed (5x10x4mm) (2)
5116ABall bearings, black rubber sealed (5x11x4mm) (2)
5114ABall bearings, black rubber sealed (5x8x2.5mm) (2)
5117ABall bearings, black rubber sealed (6x12x4mm) (2)
5180ABall bearings, black rubber sealed (6x13x5mm) (2)
5103ABall bearings, black rubber sealed (7x14x5mm) (2)

Body (Ford Bronco)

Part #Description
9215Body cage (fits #9211 body)
9211Body, Ford Bronco (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, clipless mounting, hardware) (requires #8080X inner fenders) TRX-4 Land Rover Defender
9211XBody, Ford Bronco, complete, Cyber Orange (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
9211GBody, Ford Bronco, complete, Iconic Silver (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
9211LBody, Ford Bronco, complete, Oxford White (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
9211RBody, Ford Bronco, complete, Rapid Red (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
9211TBody, Ford Bronco, complete, Shadow Black (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
9211ABody, Ford Bronco, complete, Velocity Blue (painted) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #8080X inner fenders)
6593Distribution block, Pro Scale Advanced Lighting Control System
9218Door handles, left & right/ trail sights, left & right/ trail sight retainers (2)/ 2.6x8 BCS (4)/ 1.6x7 BCS (self-tapping) (4) (fits #9211 body)
9291Front light harness, Ford Bronco (requires #6592 lighting power module and #6593 distribution block)
9220Grille, Ford Bronco/ grille mount/ 2.6x8 BCS (6)/ 3x8 BCS (4) (fits #9211 body)
9222Headlight assembly, complete (2)/ 2.6x8mm BCS (2) (fits #9211 body)
9216Latch, body mount (2)/ 3x8 BCS (8)
8036RLED light set (contains headlights, tail lights, side marker lights, and distribution block) (fits #8010 or 9230 series bodies, requires #8028 power supply)
6592Power module, Pro Scale Advanced Lighting Control System (includes mount, communication cables, hardware)
6591Pro Scale Advanced Lighting Control System (includes power module & distribution block)
9290Pro Scale LED light set, Ford Bronco, complete with power module (includes headlights, tail lights, & distribution block) (fits #9211 body)
9292Rear light harness, Ford Bronco (requires #6592 lighting power module and #6593 distribution block)
6594Receiver communication cable, Pro Scale Advanced Lighting Control System
9217Side mirrors, black (left & right)/ windshield wipers (2)/ cowl/ 2.5x8 BCS (3)/ 2.5x10 CS (2)/ 1.6x5 BCS (2) (fits #9211 body)
9219Spare tire mount/ mounting bracket/ 3x8 BCS (3)/ 3x12 BCS (4) (fits #9211 body)
9221Tail light assembly, complete (2)/ 3x8mm BCS (4) (fits #9211 body)

Body (Land Rover Defender)

Part #Description
8050-BLKBody, Land Rover Defender, black (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8050-BLUEBody, Land Rover Defender, blue (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8050Body, Land Rover Defender, complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, ExoCage, spare tire mount, decals, window masks, clipless mounting, hardware)
8050-GRNBody, Land Rover Defender, green (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8050-REDBody, Land Rover Defender, red (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8050-SANDBody, Land Rover Defender, sand (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8050-SLVRBody, Land Rover Defender, silver (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting)
8012Decals, Land Rover Defender
6593Distribution block, Pro Scale Advanced Lighting Control System
8016ExoCage (complete with assembly hardware; #8015 roof basket sold separately) (fits #8011 series bodies)
8017Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies)
8092Fender retainers (front & rear, left & right) (fits #8050 series bodies)
8013Grille, Land Rover Defender/ grille mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2) (fits #8011 series bodies)
8051Latch, body mounts (front & rear)
8027LED headlight/tail light kit (fits #8011 series bodies, requires #8028 power supply)
8095LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 series bodies)
8025LED lightbar (Rigid), TRX-4 (requires #8028 power supply)
8029LED lightbar kit (Rigid)/power supply, TRX-4
8028LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
8020Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8011 series bodies)
6592Power module, Pro Scale Advanced Lighting Control System (includes mount, communication cables, hardware)
6591Pro Scale Advanced Lighting Control System (includes power module & distribution block)
6594Receiver communication cable, Pro Scale Advanced Lighting Control System
8015Roof basket (requires #8216 ExoCage) (fits #8011 series bodies)
8021Spare tire mount/ mounting bracket/ screw pins (2)
8014Tail light housing (2)/ lens (2)/ decals (left & right) (fits #8011 series bodies)

Body Accessories

Part #Description
1926Antenna caps, vinyl (2)/ antenna spool
1726Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
8215Body mounts & posts, front & rear (complete set)
4915Body washers, foam adhesive (10)
2514Decal sheet, racing sponsors
8081Fender extensions (4)/ 3x8 flathead screws (24) (requires #8080 narrow inner fenders)
8080RFenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) (for clipless body mounting)
8022TFuel canisters (black) (2)/ screw pin
8022RFuel canisters (blue) (2)/ screw pin
8022-GRNFuel canisters (green) (2)/ screw pin
8022Fuel canisters (red) (2)/ screw pin
8022XFuel canisters (white) (2)/ screw pin
8022AFuel canisters (yellow) (2)/ screw pin
9950Official Team Traxxas racing decal set(flag logo/ 6-color)

Bumpers & Skidplates

Part #Description
8234Bumper D-Rings, grey (front or rear)/ 2.0x12 CS (4)
8234RBumper D-rings, red (front or rear)/ 2.0x12 CS (4)
8067Bumper mounts, front & rear
8237Bumper mounts, front & rear/ screw pins (4)
8235Bumper, front/ winch/ 2.6x8 BCS (1)
8236Bumper, rear
8068Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)
8066Push bar, bumper (chrome) (fits #8069 bumper)
8238Skidplate/ lower gear cover

Chassis & Attachments

Part #Description
8327-BLUEBattery hold-down, 6061-T6 aluminum (blue-anodized)
8327-GRAYBattery hold-down, 6061-T6 aluminum (gray-anodized)
8327-GRNBattery hold-down, 6061-T6 aluminum (green-anodized)
8327-ORNGBattery hold-down, 6061-T6 aluminum (orange-anodized)
8327-REDBattery hold-down, 6061-T6 aluminum (red-anodized)
8327Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
8215Body mounts & posts, front & rear (complete set)
8224Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2)
8058Chassis conversion kit, TRX-4 (long to short wheelbase) (includes rear upper & lower suspension links, front & rear inner fenders, short female half shaft, battery tray, 3x8mm FCS (4))
8057Chassis conversion kit, TRX-4 (short to long wheelbase) (includes rear upper & lower suspension links, front & rear shock towers, long female half shaft)
8220Chassis rails, 448mm (steel) (left & right)
8080RFenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) (for clipless body mounting)
8218Floor pans, left & right
8224XReceiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
8219Rock sliders, left & right
8225Seal kit, receiver box (includes o-ring, seals, and silicone grease)
8240XServo mount, 2-speed/ servo mount, T-Lock/ wire clips
8239Servo mount, steering/ chassis crossmember
8226Tray, battery

Differential Components

Part #Description
8281Carrier, differential/ differential slider/ T-Lock fork
8280ADifferential cover, front or rear (black)
8280XDifferential cover, front or rear (chrome plated)
8280-GRNDifferential cover, front or rear (green)
8280Differential cover, front or rear (grey)
8280RDifferential cover, front or rear (red)
8282Gear set, differential (output gears (2), spider gears (4), spider gear shaft (2))
8295Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))
8279Ring gear, differential/ pinion gear, differential
8279RRing gear, differential/ pinion gear, differential (machined)
8287Ring gear, differential/ pinion gear, differential (overdrive, machined)
8288Ring gear, differential/ pinion gear, differential (underdrive, machined)
8297Spool/ differential housing plug/ e-clip/ 2.5x8mm BCS (with threadlock) (4)

Driveline Components

Part #Description
8139Half shafts, center (external splined) (2)/ pin retainer (4) (plastic parts only)
8250XHalf shafts, center (internal splined, short (3) & internal splined, long (2))
8255Stub axle (portal drive) (2)
8255AStub axle, extended thread (portal drive) (2)
8269Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)
8269XWheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)
8269AWheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray- anodized) (4)/ 3x10 screw pin (4)
8269GWheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ 3x10 screw pin (4)
8269RWheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3x10 screw pin (4)

Hardware

Part #Description
15523x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)
1834Body Clips (12) (standard size)
1834ABody clips, black (12) (standard size)
3934Body clips, heavy duty (12)
3934ABody clips, heavy duty (black) (12)
4859CS 3x10 flathead (hex drive)
8167XHardware kit, stainless steel, beadlock rings (contains stainless steel hardware for 4 wheels)
8298Hardware kit, stainless steel, TRX-4 (contains all stainless steel hardware used on TRX-4)
8151Hardware kit, stainless steel, TRX-4 High Lift Kit (contains all stainless steel hardware used on TRX-4 High Lift Kit)
8217Hardware kit, TRX-4 (contains all hardware used on TRX-4)
5476XHex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball
1747PNuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
3647Nuts, 4mm flanged nylon locking (steel, serrated) (8)
8347Nuts, 4mm flanged nylon locking, serrated (black) (10)
1747RNuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747GNuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747TNuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
1747ANuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
1985PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
8221Screw pin, 3x10mm (6)
2523Screws, 2.5x10 countersunk machine (hex drive) (6)
3229Screws, 2.5x10mm cap-head machine (hex drive) (6)
3236Screws, 2.5x12mm cap-head machine (6)
2618Screws, 2.5x16mm cap-head machine (6)
3215Screws, 2.5x6mm cap-head machine (hex drive) (6)
2524Screws, 2.5x8 countersunk machine (hex drive) (6)
2617Screws, 2.5x8mm button-head machine (hex drive) (6)
3965Screws, 2.5x8mm cap-head machine (6)
8299Screws, 2.6x12mm button-head, self-tapping (hex drive) (6)
8167Screws, 2x10mm cap-head, self-tapping (hex drive) (10)
2564Screws, 2x8mm cap-head machine (hex drive) (6)
2577Screws, 3x10mm button-head machine (hex drive) (6)
2578Screws, 3x12mm button-head machine (hex drive) (6)
2579Screws, 3x15mm button-head machine (hex drive) (6)
2591Screws, 3x23mm button-head machine (hex drive) (6)
2581Screws, 3x25mm button-head machine (hex drive) (6)
2616Screws, 3x27mm button-head machine (hex drive) (6)
2582Screws, 3x30mm button-head machine (hex drive) (6)
2575Screws, 3x6mm button-head machine (hex drive) (6)
3932Screws, 3x6mm flat-head machine (hex drive) (6)
2576Screws, 3x8mm button-head machine (hex drive) (6)
3931Screws, 3x8mm flat-head machine (hex drive) (6)
3933Screws, 4x16mm button-head machine (hex drive) (6)

LED Light Accessories

Part #Description
80313-in-1 wire harness, LED light kit
80894-in-2 wire harness, LED light kit
6589Distribution block, LED light set
6593Distribution block, Pro Scale Advanced Lighting Control System
8027LED headlight/tail light kit (fits #8011 series bodies, requires #8028 power supply)
8095LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 series bodies)
8025LED lightbar (Rigid), TRX-4 (requires #8028 power supply)
8029LED lightbar kit (Rigid)/power supply, TRX-4
8028LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
8026XLED rock light kit, TRX-4/TRX-6 (requires #8028 power supply and #8018, #8072, or #8080 inner fenders)
6597Motor sense wire harness, Pro Scale Advanced Lighting Control System
6592Power module, Pro Scale Advanced Lighting Control System (includes mount, communication cables, hardware)
6591Pro Scale Advanced Lighting Control System (includes power module & distribution block)
6594Receiver communication cable, Pro Scale Advanced Lighting Control System

Long Arm Lift Kit

Part #Description
8162RBody, GTS shock, long (aluminum, red-anodized) (1) (for use with #8140R TRX-4 Long Arm Lift Kit)
8162Body, GTS shock, long (silver aluminum) (1) (for use with #8140 TRX-4 Long Arm Lift Kit)
8147Cable, T-lock (medium) (for use with TRX-4 Long Arm Lift Kit)
8148Cable, T-lock, extra long (193mm) (for use with TRX-4 Long Arm Lift Kit)
8150Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with TRX-4 Long Arm Lift Kit)
8140Long arm lift kit, TRX-4, complete
8140XLong arm lift kit, TRX-4, complete (includes blue powder coated links, blue-anodized shocks)
8140-GRNLong arm lift kit, TRX-4, complete (includes green powder coated links, green-anodized shocks)
8140RLong arm lift kit, TRX-4, complete (includes red powder coated links, red-anodized shocks)
8149Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4 Long Arm Lift Kit)
8141Servo mount, steering (for use with TRX-4 Long Arm Lift Kit)
8161Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4 Long Arm Lift Kit)
8160XShocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4 Long Arm Lift Kit)
8160-GRNShocks, GTS, aluminum (green-anodized) (assembled without springs) (4) (for use with #8140 TRX-4 Long Arm Lift Kit)
8160RShocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4 Long Arm Lift Kit)
8160Shocks, GTS, silver aluminum (assembled without springs) (4) (for use with #8140 TRX-4 Long Arm Lift Kit)
8153Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4 Long Arm Lift Kit)
8154Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4 Long Arm Lift Kit)
8155Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4 Long Arm Lift Kit)
8156Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4 Long Arm Lift Kit)
8157Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4 Long Arm Lift Kit)
8146XSteering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)
8146RSteering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
8144XSuspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)
8144RSuspension link, front upper, 5x68mm (1) (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
8144Suspension link, front upper, 5x68mm (1) (steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)
8143Suspension links, front lower (2) (5x104mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)
8143RSuspension links, front lower, red (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
8145Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)
8145XSuspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)
8145RSuspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
8142Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)
8142RSuspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
8172Tires & wheels, assembled (Method Race Wheels 105 Beadlock 2.2" black chrome beadlock wheels, Canyon Trail 5.3x2.2" tires, foam inserts) (1 left, 1 right)
8181-BLUETires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, blue beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8181-GRNTires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, green beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8181-REDTires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, red beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8181Tires & wheels, assembled, glued (TRX-4 Sport 2.2" wheels, Canyon Trail 5.3x2.2" tires) (2)
8170Tires, Canyon Trail 5.3x2.2"/ foam inserts (2)
8171Wheels, 2.2", Method Race Wheels 105 Beadlock (black chrome, beadlock) (beadlock rings sold separately)
8171AWheels, 2.2", Method Race Wheels 105 Beadlock (charcoal gray, beadlock) (beadlock rings sold separately)
8180Wheels, TRX-4 Sport 2.2 (2)
8180-BLUEWheels, TRX-4 Sport 2.2 (gray, blue beadlock style) (2)
8180-GRNWheels, TRX-4 Sport 2.2 (gray, green beadlock style) (2)
8180-REDWheels, TRX-4 Sport 2.2 (gray, red beadlock style) (2)

Motors & Electronics

Part #Description
1926Antenna caps, vinyl (2)/ antenna spool
1726Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
2262BEC, complete (12.6 volts (3s LiPo) maximum input voltage) (includes receiver box cover and seals)
2064AGear set (for 2065A waterproof sub-micro servo)
2064RGear set, metal (for 2065R waterproof sub-micro servo)
2072XGear set, metal (for 2070, 2075 servos)
2252Gear set, metal (for 2250, 2255 servos)
2272Gear set, metal (for 2270 waterproof servo)
2287Gear set, metal (for 2280 servo)
2072RGear set, metal, high-speed (for 2070, 2075 servos)
8290XMotor mount plate, 6061-T6 aluminum (blue-anodized)
8290AMotor mount plate, 6061-T6 aluminum (charcoal gray-anodized)
8290GMotor mount plate, 6061-T6 aluminum (green-anodized)
8290RMotor mount plate, 6061-T6 aluminum (red-anodized)
3975RMotor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)
8290Plate, motor/ upper spur gear cover
2254Servo case, aluminum (middle) (blue-anodized) (for 2250 servo)
2253Servo case, aluminum (middle) (red-anodized) (for 2255 servo)
2251Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
2271Servo case/ gaskets (for 2270 waterproof servo)
2063AServo case/gaskets (for 2065A waterproof sub-micro servo)
2063RServo case/gaskets (for 2065R metal gear, waterproof, sub-micro servo)
2063XServo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
5669Servo horn (with built-in spring and hardware) (for Summit locking differential)
2075RServo, digital high-speed, metal gear (ball bearing), waterproof
2250Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal servo horn recommended for optimal performance)
2255Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal servo horn recommended for optimal performance)
2280Servo, digital high-torque 600 brushless, metal gear (ball bearing), waterproof
2075XServo, digital high-torque, metal gear (ball bearing), waterproof
2270Servo, digital high-torque, metal gear (ball bearing), waterproof
2065AServo, sub-micro, waterproof
2065RServo, sub-micro, waterproof, metal gear
3025XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)
2261Y-harness, BEC

Pro Scale Winch & Accessories

Part #Description
8865Bumper, front, winch, narrow (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4 Land Rover Defender and Tactical Unit with 8855 winch) (200mm wide)
8859Fairlead, winch
8870XFairlead, winch, aluminum (blue-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870AFairlead, winch, aluminum (gray-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870GFairlead, winch, aluminum (green-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870TFairlead, winch, aluminum (orange-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870RFairlead, winch, aluminum (red-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8862Gearmotor, winch
8863Hook, winch (steel)/ line retainer/ washer
8858Housings (front & rear), winch/ decal
8864XLine, winch (blue)
8864Line, winch (gray)
8864RLine, winch (red)
8860Spool shaft assembly, winch
8861Spool, winch
8855Winch kit with wireless controller, TRX-4 and TRX-6
8856Winch, TRX-4 and TRX-6 (requires #8857 wireless remote)
8857Wireless remote, winch, TRX-4 and TRX-6

Radio System, Batteries & Chargers

Part #Description
2823X1400mah 11.1v 3-Cell 25C LiPo Battery
2820X2200mah 7.4v 2-Cell 25C LiPo Battery
2827X3000mah 7.4v 2-Cell LiPo Battery
2923X3000mAh 8.4V 7-cell flat NiMH Battery, Power Cell
2940X3300mAh 8.4V 7-cell flat NiMH Battery, Series 3 Power Cell
2849X4000mah 11.1v 3-Cell 25C LiPo Battery
2950X4200mAh 8.4V 7-cell flat NiMH Battery, Series 4 Power Cell
2872X5000mah 11.1v 3-Cell 25C LiPo Battery
2842X5000mah 7.4v 2-Cell 25C LiPo Battery
2960X5000mAh 8.4V 4-cell flat NiMH Battery, Series 5 Power Cell
2844R5200mAh 7.4v 2-cell 35C LiPo Battery
2843X5800mah 7.4v 2-Cell 25C LiPo Battery
2869X7600mah 7.4v 2-Cell 25C LiPo Battery
2976AC to DC adapter
2938XAdapter, Traxxas iD LiPo battery (adapts Traxxas iD batteries to separate balance ports)
1726Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
2943Battery charge indicators, green (4), grey (4), blue (4)
6548Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter)
8222Battery strap (for use with 2200mAh 2-cell and 1400mAh 3-cell LiPo batteries)
2914Battery, Power Cell AA Alkaline (4)
2983Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH iD battery (1))
2992Battery/charger completer pack (includes #2970 iD charger (1), #2843X 5800mAh 7.4V 2-cell 25C LiPo iD battery (1))
2994Battery/charger completer pack (includes #2970 iD charger (1), #2849X 4000mAh 11.1v 3-Cell 25C LiPo iD battery (1)) 2970-3S Battery/charger completer pack (includes #2970 iD charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD battery (1))
2991Battery/charger completer pack (includes #2972 Dual iD charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo iD Battery (2)) 2985-2S Battery/charger completer pack (includes #2985 charger (1), #2827X 3000mAh 7.4V 2-cell 20C LiPo iD Battery (1))
2262BEC, complete (12.6 volts (3s LiPo) maximum input voltage) (includes receiver box cover and seals)
2975Charger, D/C, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
2972Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification
2973Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification
2981Charger, EZ-Peak Plus 4s, 8 amp, NiMH/LiPo with iD Auto Battery Identification
2970Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification
2985Charger, EZ-Peak, USB-C, 40W, NiMH/LiPo with iD Auto Battery Identification
6525Communication link, telemetry expander
6512Cover plate, Traxxas Link Bluetooth module
6565Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
2971EZ-Peak Live 12-amp NiMH/LiPo Fast Charger with iD Auto Battery Identification and Bluetooth
2978Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977)
2064AGear set (for 2065A waterproof sub-micro servo)
2064RGear set, metal (for 2065R waterproof sub-micro servo)
2072XGear set, metal (for 2070, 2075 servos)
2252Gear set, metal (for 2250, 2255 servos)
2272Gear set, metal (for 2270 waterproof servo)
2072RGear set, metal, high-speed (for 2070, 2075 servos)
2968XLiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas iD batteries)
2968LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas iD batteries)
6561Mount, telemetry expander
6535Mount, temperature sensor (electric motors)/ wire tie/ thermal pad
6533Receiver, micro, TQi 2.4GHz with telemetry & TSM (5-channel)
6552Seal kit, expander box (includes o-ring, seals, and silicone grease)
6526Sensor, auto-detectable, temperature
6527Sensor, auto-detectable, voltage
6521Sensor, temperature and voltage (long)
2254Servo case, aluminum (middle) (blue-anodized) (for 2250 servo)
2253Servo case, aluminum (middle) (red-anodized) (for 2255 servo)
2251Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
2271Servo case/ gaskets (for 2270 waterproof servo)
2063AServo case/gaskets (for 2065A waterproof sub-micro servo)
2063RServo case/gaskets (for 2065R metal gear, waterproof, sub-micro servo)
2063XServo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
2075RServo, digital high-speed, metal gear (ball bearing), waterproof
2250Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal servo horn recommended for optimal performance)
2255Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof (#2262 external BEC and #8247X metal servo horn recommended for optimal performance)
2075XServo, digital high-torque, metal gear (ball bearing), waterproof
2270Servo, digital high-torque, metal gear (ball bearing), waterproof
2065AServo, sub-micro, waterproof
2065RServo, sub-micro, waterproof, metal gear
6553XTelemetry Expander 2.0 and GPS module 2.0, TQi radio system
6550XTelemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
6551XTelemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
6509RTQi 2.4 GHz High Output radio system, 2-channel, Traxxas Link enabled, TSM (2-ch transmitter, 5-ch micro receiver)
6507RTQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module, TSM (4-ch transmitter, 5-ch micro receiver)
6530Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 4- channel (transmitter only)
6511Traxxas Link Bluetooth module
2261Y-harness, BEC

Scale Details

Part #Description
8022TFuel canisters (black) (2)/ screw pin
8022RFuel canisters (blue) (2)/ screw pin
8022-GRNFuel canisters (green) (2)/ screw pin
8022Fuel canisters (red) (2)/ screw pin
8022XFuel canisters (white) (2)/ screw pin
8022AFuel canisters (yellow) (2)/ screw pin
8023Jack (1)/ 2x8 BCS (1)
8023TJack (black) (1)/ 2x8 BCS (1)

Shock Oil

Part #Description
5031Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
5034Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5029Shock oil bottle (60cc) (for mixing shock oil)
5038XShock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
5038Spinning carousel rack

Shocks (GTS)

Part #Description
8266Body, GTS shock (aluminum, silver-anodized) (1)
8266XBody, GTS shock (hard-anodized, PTFE-coated aluminum) (1)
8264Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
8274Hollow ball set, complete, TRX-4 (aluminum, PTFE-coated)
5475Multi-tool (plastic)
8261Piston, damper (red) (4)/ e-clips (8)
8262Rebuild kit, TRX-4 shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
8263Shock shaft, 3x47mm (GTS) (2)
8263TShock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)
8260XShocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN shafts (assembled with spring retainers) (2)
8260AShocks, GTS, blue-anodized (assembled with spring retainers) (2)
8260GShocks, GTS, green-anodized (assembled with spring retainers) (2)
8260RShocks, GTS, red-anodized (assembled with spring retainers) (2)
8260Shocks, GTS, silver aluminum (assembled with spring retainers) (2)

Slipper Clutch Components

Part #Description
8292Input shaft/ output shaft (transmission)
8286Output shafts (transfer case), front & rear
8254Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))
8249Slipper eliminator plate

Springs

Part #Description
8041Springs, shock (GTS) (front) (0.45 rate) (2)
8040Springs, shock (GTS) (rear) (0.54 rate) (2)
8042Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2)
8043Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)
8044Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)
8045Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)

Spur Gears & Pinion Gears

Part #Description
6746Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
6747Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
3942XGear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3943XGear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3944XGear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3945XGear, 15-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3946XGear, 16-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3947XGear, 17-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3948XGear, 18-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3950XGear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3951XGear, 21-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3952XGear, 22-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
6745Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
8279Ring gear, differential/ pinion gear, differential
8052Spur gear, 39-tooth (32-pitch)
8053Spur gear, 45-tooth (32-pitch)

Steering Components

Part #Description
8232Caster blocks (portal drive), left & right
8232XCaster blocks, 6061-T6 aluminum (blue-anodized), left and right
8232ACaster blocks, 6061-T6 aluminum (charcoal gray-anodized), left and right
8232GCaster blocks, 6061-T6 aluminum (green-anodized), left and right
8232RCaster blocks, 6061-T6 aluminum (red-anodized), left and right
2072XGear set, metal (for 2070, 2075 servos)
2072RGear set, metal, high-speed (for 2070, 2075 servos)
8274Hollow ball set, complete, TRX-4 (aluminum, PTFE-coated)
5355Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
8275Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
8276Rod ends (10)
8277Rod ends, angled 10-degrees (8)
2742Rod ends, long (6)/ hollow ball connectors (6)
8278Rod ends, offset (4)
8247XServo horn, steering, metal/ 3x14 BCS (1)
2075RServo, digital high-speed, metal gear (ball bearing), waterproof
2250Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
2255Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
2075XServo, digital high-torque, metal gear (ball bearing), waterproof
5529Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
8246Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)
8243Suspension link, front, 5x100mm (lower) (steel) (2)
8244Suspension link, front, 5x63mm (upper) (steel) (2)
8245Suspension link, rear, 5x121mm (upper or lower) (steel) (2)

Suspension Linkage

Part #Description
8274Hollow ball set, complete, TRX-4 (aluminum, PTFE-coated)
5355Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
8275Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
8276Rod ends (10)
8277Rod ends, angled 10-degrees (8)
2742Rod ends, long (6)/ hollow ball connectors (6)
8278Rod ends, offset (4)
5529Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
8243Suspension link, front, 5x100mm (lower) (steel) (2)
8244Suspension link, front, 5x63mm (upper) (steel) (2)
8248Suspension link, rear, 5x109mm (upper or lower) (steel) (2)
8245Suspension link, rear, 5x121mm (upper or lower) (steel) (2)

Team Traxxas Items

Part #Description
9916Backpack, RC car carrier, 12" x 12" x 24" (fits TRX-4 & similar)
2514Decal sheet, racing sponsors
9917Duffel bag, medium, 30" x 12" x 12" (fits 1/10 Slash, TRX-4, & similar)
9950Official Team Traxxas racing decal set(flag logo/ 6-color)
9909Traxxas racing banner, red & black (3x7 feet)

Tires & Wheels

Part #Description
8169TBeadlock rings, black (1.9") (aluminum) (4)/ 2x10 CS (48)
8168TBeadlock rings, black (2.2") (aluminum) (4)/ 2x10 CS (48)
8169XBeadlock rings, blue (1.9") (aluminum) (4)/ 2x10 CS (48)
8168XBeadlock rings, blue (2.2") (aluminum) (4)/ 2x10 CS (48)
8168GBeadlock rings, green (2.2") (aluminum) (4)/ 2x10 CS (48)
8169RBeadlock rings, red (1.9") (aluminum) (4)/ 2x10 CS (48)
8168RBeadlock rings, red (2.2") (aluminum) (4)/ 2x10 CS (48)
8169Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS (48)
8168Beadlock rings, satin (2.2") (aluminum)(4)/ 2x10 CS (48)
8176Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended thread stub axle)
1747PNuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
1747RNuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747GNuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747TNuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
1747ANuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)
8174Tires & wheels, assembled (Method Race Wheels 105 Beadlock 1.9" black chrome beadlock wheels, Canyon Trail 4.6x1.9" tires, foam inserts) (1 left, 1 right)
8182Tires & wheels, assembled (Method Race Wheels 105 Beadlock 1.9" satin black chrome, blue beadlock style wheels, Canyon Trail 4.6x1.9" tires, foam inserts) (1 left, 1 right)
8177Tires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8166Tires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8166XTires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (4)/ center caps (4)/ decal sheet (requires #8255A extended thread stub axle)
8183XTires & wheels, assembled, glued (1.9" classic chrome wheels, Canyon Trail 4.6x1.9" tires) (4)/ center caps (4)/ decal sheet (requires #8255A extended thread stub axle)
8273Tires & wheels, assembled, glued (Tactical 1.9" wheels, Canyon Trail 4.6x1.9" tires) (2)
8272XTires & wheels, assembled, glued (TRX-4 1.9" satin beadlock wheels, Canyon Trail 4.6x1.9" tires) (2)
8272Tires & wheels, assembled, glued (TRX-4 1.9" wheels, Canyon Trail 4.6x1.9" tires) (2)
8181-BLUETires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, blue beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8181-GRNTires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, green beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8181-REDTires & wheels, assembled, glued (TRX-4 Sport 2.2" gray, red beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2)
8172Tires and wheels, assembled (Method 105 2.2 black chrome beadlock wheels, Canyon Trail 5.3x2.2 tires, foam inserts) (1 left, 1 right) (for use with TRX-4 Long Arm Lift Kit)
8181Tires and wheels, assembled, glued (TRX-4 Sport 2.2 wheels, Canyon Trail 5.3x2.2 tires) (2) (for use with TRX-4 Long Arm Lift Kit)
8270Tires, Canyon Trail 4.6x1.9" (S1 compound)/ foam inserts (2)
8170Tires, Canyon Trail 5.3x2.2/ foam inserts (2) (for use with TRX- 4 Long-Arm Lift Kit)
8269Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)
8269XWheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)
8269AWheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray- anodized) (4)/ 3x10 screw pin (4)
8269GWheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ 3x10 screw pin (4)
8269RWheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3x10 screw pin (4)
8175Wheels, 1.9", chrome (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8173Wheels, 1.9", Method Race Wheels 105 Beadlock (black chrome, beadlock) (beadlock rings sold separately)
8173AWheels, 1.9", Method Race Wheels 105 Beadlock (charcoal gray, beadlock) (beadlock rings sold separately)
8171Wheels, Method 105 2.2" (black chrome, beadlock) (beadlock rings sold separately) (for use with TRX-4 Long Arm Lift Kit)
8171AWheels, Method 105 2.2" (charcoal gray, beadlock) (beadlock rings sold separately) (for use with TRX-4 Long Arm Lift Kit)
8271Wheels, TRX-4 1.9 (2)
8271XWheels, TRX-4 1.9 (satin beadlock) (2)
8180Wheels, TRX-4 Sport 2.2 (2)
8180-BLUEWheels, TRX-4 Sport 2.2 (gray, blue beadlock style) (2)
8180-GRNWheels, TRX-4 Sport 2.2 (gray, green beadlock style) (2)
8180-REDWheels, TRX-4 Sport 2.2 (gray, red beadlock style) (2)
8268Wheels, TRX-4 Tactical 1.9 (2)

Transmission Components

Part #Description
8283Cable, T-lock (front)
8284Cable, T-lock (rear)
8289Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage
8293XGear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))
8291Gearbox housing (includes main housing, front housing, & cover)
8285Gears, transfer case (3)
5041Grease, premium high performance (20cc)
8292Input shaft/ output shaft (transmission)
8290XMotor mount plate, 6061-T6 aluminum (blue-anodized)
8290AMotor mount plate, 6061-T6 aluminum (charcoal gray-anodized)
8290GMotor mount plate, 6061-T6 aluminum (green-anodized)
8290RMotor mount plate, 6061-T6 aluminum (red-anodized)
8295Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))
8294Output gear, high range, 24T (metal)
8286Output shafts (transfer case), front & rear
8290Plate, motor/ upper spur gear cover
8249Slipper eliminator plate
8296Transmission gears, single speed, metal

Traxxas Tools

Part #Description
3433XBody reamer (aluminum handle)
3433Body reamer (plastic handle)
3436Cap, body reamer
3432Scissors, curved tip
3431Scissors, straight tip
8712Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
8720Speed bit handle, large (overmolded)
8721Speed bit handle, medium (one piece)
8722Speed bit handle, premium (rubber overmold)
8710Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4” drive
8711Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4" drive
8719Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
8716Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive
8716XSpeed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive
8715Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive
8715XSpeed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive
8714Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive
2748RTool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)
3415Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)

TRX-4 Traxx

Part #Description
8889Bearing retainers, inner (2)/ outer (2)
8890Drive wheel (1)
8885Shock mounts (frame, left (2), frame, right (2))/ portal mounts (1 each, front (left & right), rear (left & right))
8888Spring (4)
8887Stub axle (1)
8886Stub axle nut (4)
8891Tension wheels (6)/ road wheels (4)
8881Traxx, front, left (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8895 rubber track)
8882Traxx, front, right (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8895 rubber track)
8883Traxx, rear, left (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8896 rubber track)
8884Traxx, rear, right (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8896 rubber track)
8880Traxx, TRX-4 (4) (complete set, front & rear) If you have questions or need technical assistance, call Traxxas at: 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only) For orders, calls outside the U.S., and other information, call 972-549-3000,

Source document

Traxxas TRX-4 Parts ListOpen Document

TRX-4 alerts

Email me about new:

RC Setup App icon

Free to start · iOS & Android

Setup App & Race Log

Your Traxxas TRX-4 is in the RC Setup App

Save every setup change you make to your Traxxas TRX-4, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use
Download on the App StoreGet it on Google Play
See what it does →
← Back to Setup Guides