Need help setting up your car so it handles the way you want? Search our setup guides and tips from top drivers to get you on the right track!
Tony Newland of Klinik RC shows in detail how to build (or rebuild) a ball diff the right way. This one goes almost 25 minutes, so grab some popcorn and get ready for some serious learnin'.
Adam explains how he measures his clutch pads to see if they need to be replaced, and explains how running on old clutch shoes will hurt your performance.
Ever have trouble getting the perfect camber angle because the hexes tweak after you get the axles set? Alexander Hagberg of XRAY has the solution!
Ty provides a quick explainer on how to know when your pillow ball suspension needs to be cleaned out, and how to do the actual maintenance to ensure the uprights move freely.
Here's a quick explainer of how caster impacts pan cars, and specifically 1/12th scale pan cars. It's focused on the XRAY X12 '21, but most of the content applies to any pan car.
Tony Newland of Klinik RC recorded a lengthy explainer of high-amp charging - how to do it, and what it does for your batteries, why it gives you that extra punch, and how to take care of them properly when you use high-amp charging.
Alexander Hagberg walks us through some of the basics of X12 suspension setup theory.
Infinity's Jilles Groskamp walks us through the basics of the Ackermann effect and how to tune it in your RC car
Drake gives a quick overview of the various shock bladders and how they affect handling, focused on off-road applications.
Settle in for this one - it's over an hour, and has great production value (and is hilarious!) But if you want to know how a carb works, how the needle valves work, how to adjust your idle, or anything else involved with nitro tuning, you must check this out.
.avif)
.avif)
.avif)