So Dialed
ManualSource: XRAY

XRAY XT2 28 Manual v3

XRAY XT2 28 Manual v3Open Document

Commonly replaced parts

The parts an XT2 '28 goes through first: the kit's front arm, C-hubs and steering block, the rear upright, axle and drive shafts, shock shafts, the new 5.4mm ball ends, slipper pads, diff gaskets and the front bumper, with the full list below.

Part #Description
322115-M (opens in new tab)XT2 COMPOSITE SUSPENSION ARM FRONT LOWER - SOLID - MEDIUM
322210-M (opens in new tab)COMPOSITE C-HUB RIGHT - MEDIUM
322220-M (opens in new tab)COMPOSITE C-HUB LEFT - MEDIUM
322250-M (opens in new tab)COMPOSITE STEERING BLOCK - MEDIUM
323357-M (opens in new tab)COMPOSITE UPRIGHT REAR - LOWER POSITION - MEDIUM
325340 (opens in new tab)REAR DRIVE AXLE LB - HUDY SPRING STEEL™
325313 (opens in new tab)DRIVE SHAFT 97MM WITH 2.5MM PIN - HUDY SPRING STEEL™
368161 (opens in new tab)FRONT HARDENED SHOCK SHAFT 42MM (2)
368262 (opens in new tab)REAR HARDENED SHOCK SHAFT 47MM (2)
362656 (opens in new tab)HARD STEEL BALL END 5.4MM WITH 6MM THREAD - NICKEL COATED (2)
322660 (opens in new tab)COMPOSITE BALL JOINT 5.4MM (12+1 +1)
352460 (opens in new tab)PIVOT BALL 5.8 (10)
364131 (opens in new tab)SLIPPER CLUTCH PAD SLS - SOFT (3)
324990 (opens in new tab)DIFF GASKET (4)
321200 (opens in new tab)COMPOSITE FRONT BUMPER

More option parts for this car

Parts & upgrades at AMainAD (opens in new tab)1/10 off-road tire chartDiff oil chartShock oil chart
RC Setup App icon

Free to start · iOS & Android

Your XRAY XT2 '28 is in the RC Setup App

Save every setup change you make to your XRAY XT2 '28, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

Download on the App StoreGet it on Google Play
See what it does →

Email me about new:

Manuals for other versions of this car:

XT2 '24XT2 '23XT2 '21

Every part XRAY lists for the XRAY XT2 '28, from XRAY's own parts list, including the spares, the option parts and the hardware. Part numbers link to AMain Hobbies where the part is still sold; parts with no current match are listed as plain text.

Full parts list

Car parts (323)

Part #Description
293421ALU CLAMP STEERING SERVO HORN - EXTENDED 8MM - KO PROPO, SANWA - 23T
293422ALU CLAMP STEERING SERVO HORN - EXTENDED 8MM - FUTABA, SAVOX - 25T
296530-BALU NUT M3 - BLUE (10)
296530-KALU NUT M3 - BLACK (10)
296530-OALU NUT M3 - ORANGE (10)
296541-BALU NUT M4 WITH SERRATED FLANGE - BLUE (4)
296541-KALU NUT M4 WITH SERRATED FLANGE - BLACK (4)
296541-OALU NUT M4 WITH SERRATED FLANGE - ORANGE (4)
296541-VALU NUT M4 WITH SERRATED FLANGE - VIOLET (4)
301322 (opens in new tab)FRONT BODY MOUNT SET 6MM
301323 (opens in new tab)FRONT BODY MOUNT SET + 1MM HEIGHT
301324 (opens in new tab)FRONT BODY MOUNT SET +2MM HEIGHT
301332 (opens in new tab)REAR BODY MOUNT SET 6MM
301333 (opens in new tab)REAR BODY MOUNT SET +1MM HEIGHT
301334 (opens in new tab)REAR BODY MOUNT SET +2MM HEIGHT
302292 (opens in new tab)STEEL STEERING BUSHING LONG (4)
302293C-HUB BUSHING COMPOSITE - V2 (4)
302656 (opens in new tab)ALU BALL END 4.9MM (2)
303120 (opens in new tab)SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
303121-K (opens in new tab)ALU SHIM 3x6x0.5MM - BLACK (10)
303121-OALU SHIM 3x6x0.5MM - ORANGE (10)
303122ALU SHIM 3x6x1.0MM (10)
303122-K (opens in new tab)ALU SHIM 3x6x1.0MM - BLACK (10)
303122-O (opens in new tab)ALU SHIM 3x6x1.0MM - ORANGE (10)
303123 (opens in new tab)ALU SHIM 3x6x2.0MM (10)
303123-KALU SHIM 3x6x2.0MM - BLACK (10)
303123-O (opens in new tab)ALU SHIM 3x6x2.0MM - ORANGE (10)
303124-K (opens in new tab)ALU SHIM 3x6x2.5MM - BLACK (10)
303125 (opens in new tab)ALU SHIM 3x6x3.0MM (10)
303125-K (opens in new tab)ALU SHIM 3x6x3.0MM - BLACK (10)
303125-O (opens in new tab)ALU SHIM 3x6x3.0MM - ORANGE (10)
303126-K (opens in new tab)ALU SHIM 3x6x5.0MM - BLACK (10)
303127 (opens in new tab)ALU SHIM 3x6x4.0MM (10)
303127-K (opens in new tab)ALU SHIM 3x6x4.0MM - BLACK (10)
303129 (opens in new tab)COMPOSITE SET OF SHIMS 3x 3x6x1 MM, 1x 3x6x2MM (2)
303140-K (opens in new tab)ALU SHIM 3x5x2.0MM - BLACK (10)
303140-O (opens in new tab)ALU SHIM 3x5x2.0MM - ORANGE (10)
303141-K (opens in new tab)ALU SHIM 3x5x1.0MM - BLACK (10)
303141-O (opens in new tab)ALU SHIM 3x5x1.0MM - ORANGE (10)
303142-K (opens in new tab)ALU SHIM 3x5x0.5MM - BLACK (10)
303142-O (opens in new tab)ALU SHIM 3x5x0.5MM - ORANGE (10)
303143 (opens in new tab)ALU SHIM 3x5x0.25MM (10)
303144-O (opens in new tab)ALU SHIM 3x5x4.0MM - ORANGE (10)
303146 (opens in new tab)ALU BUSHING 3x5x6.0MM (2)
303411 (opens in new tab)COMPOSITE ANTI-ROLL BAR HOLDERS
303431-K (opens in new tab)4.9MM ALUMINUM BALL END SET (BLACK) (2)
303454 (opens in new tab)COMPOSITE BALL JOINT 4.9MM - OPEN (4)
303454-V2 (opens in new tab)COMPOSITE BALL JOINT 4.9MM - OPEN (4)
303455 (opens in new tab)COMPOSITE ANTI-ROLL BAR o1.6MM BALL JOINT 4.9MM (4)
304932 (opens in new tab)GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2 +4) - LOW
304980 (opens in new tab)COMPOSITE GEAR DIFF CROSS PIN
305092 (opens in new tab)BALL DIFFERENTIAL SPRING
306219 (opens in new tab)COMPOSITE SET OF SERVO SHIMS (4)
308019COMPOSITE SET OF SHOCKS SHIMS & NUTS (2)
309402 (opens in new tab)BODY CLIP FOR 6MM BODY POST (4)
320904 (opens in new tab)ALU STEERING BLOCKS & C-HUBS WITH BACKSTOP - SET
320905 (opens in new tab)XB2 5G GEAR BOX CONVERSION - SET
321127XT2 ALU CHASSIS - 2.5MM - LONG - REAR WIDE - SWISS 7075 T6
321162 (opens in new tab)COMPOSITE FRONT BRIDGE UPPER DECK
321200 (opens in new tab)COMPOSITE FRONT BUMPER
321210 (opens in new tab)ALU FRONT SUSPENSION HOLDER BRACE - SWISS 7075 T6 (3MM)
321211 (opens in new tab)ALU FRONT SUSP. HOLDER BRACE 23°/29° KICK-UP - SWISS 7075 T6 (3mm)
321212 (opens in new tab)CARBON FRONT SUSPENSION HOLDER BRACE 0°
321255COMPOSITE ELEVATED SIDE BRACES L +R - LONG
321255-G (opens in new tab)COMPOSITE ELEVATED SIDE BRACES L + R - LONG - GRAPHITE
321280 (opens in new tab)ALU FLAT CHASSIS BRACE FOR 5G GEAR BOX
321281 (opens in new tab)ALU FLAT CHASSIS BRACE FOR 3G GEAR BOX
321291 (opens in new tab)COMPOSITE 5-WIRES HOLDER - SET
321324-H (opens in new tab)XT2 COMPOSITE FRONT BODY MOUNT FOR 1-PIECE CHASSIS
321324-S (opens in new tab)XT2 COMPOSITE FRONT BODY MOUNT FOR 1-PIECE CHASSIS - SOFT
322045 (opens in new tab)COMPOSITE FRONT ROLL-CENTER HOLDER FOR BRIDGE UPPER DECK
322046 (opens in new tab)ALU FRONT ROLL-CENTER HOLDER FOR BRIDGE UPPER DECK - SWISS 7075 T6
322092XT2 CARBON SHOCK TOWER FOR BRIDGE UPPER DECK - LOWER - FRONT
322114-HXT2 COMPOSITE SUSPENSION ARM FRONT LOWER - HARD
322115-G (opens in new tab)XT2 COMPOSITE SUSPENSION ARM FRONT LOWER - SOLID - GRAPHITE
322115-H (opens in new tab)XT2 COMPOSITE SUSPENSION ARM FRONT LOWER - SOLID - HARD
322115-M (opens in new tab)XT2 COMPOSITE SUSPENSION ARM FRONT LOWER - SOLID - MEDIUM
322210-G (opens in new tab)COMPOSITE C-HUB RIGHT - GRAPHITE
322210-H (opens in new tab)COMPOSITE C-HUB RIGHT - HARD
322210-M (opens in new tab)COMPOSITE C-HUB RIGHT - MEDIUM
322211 (opens in new tab)ALU C-HUB RIGHT - SWISS 7075 T6
322212 (opens in new tab)ALU C-HUB UNIVERSAL - SWISS 7075 T6
322220-G (opens in new tab)COMPOSITE C-HUB LEFT - GRAPHITE
322220-H (opens in new tab)COMPOSITE C-HUB LEFT - HARD
322220-M (opens in new tab)COMPOSITE C-HUB LEFT - MEDIUM
322221 (opens in new tab)ALU C-HUB LEFT - SWISS 7075 T6
322250-G (opens in new tab)COMPOSITE STEERING BLOCK - GRAPHITE
322250-H (opens in new tab)COMPOSITE STEERING BLOCK - HARD
322250-M (opens in new tab)COMPOSITE STEERING BLOCK - MEDIUM
322252 (opens in new tab)ALU STEERING BLOCK UNIVERSAL - SWISS 7075 T6
322270 (opens in new tab)ALU SHIM 5x7x1.0MM (10)
322280 (opens in new tab)COMPOSITE CASTER BUSHING (2x 0°, 2.5°, 5°)
322284 (opens in new tab)CARBON EXTENSION FOR ALU STEERING BLOCK WITH BACKSTOP - 1 DOT (2)
322285 (opens in new tab)CARBON EXTENSION FOR ALU STEERING BLOCK WITH BACKSTOP - 2 DOTS (2)
322286 (opens in new tab)CARBON EXTENSION FOR ALU STEERING BLOCK WITH BACKSTOP - 3 DOTS (2)
322294 (opens in new tab)CARBON EXTENSION FOR STEERING BLOCK - 1 DOT (2)
322295 (opens in new tab)CARBON EXTENSION FOR STEERING BLOCK - 2 DOTS (2)
322296 (opens in new tab)CARBON EXTENSION FOR STEERING BLOCK - 3 DOTS (2)
322308 (opens in new tab)CARBON DISTANCE SHIM FOR FRONT LOWER ARM MOUNT +3°/-3°
322309 (opens in new tab)CARBON PLATE FOR FRONT LOWER ARM MOUNT 1MM
322312 (opens in new tab)BRASS 46G FRONT LOWER ARM MOUNT 0° - V2
322314XB2 DIRT EDITION 23/29° BRASS FRONT LOWER ARM MOUNT
322315 (opens in new tab)COMPOSITE FRONT LOWER ARM MOUNT FOR 1-PIECE CHASSIS
322316 (opens in new tab)ALU FRONT LOWER ARM MOUNT 0° - SWISS 7075 T6
322317 (opens in new tab)ALU FRONT LOWER ARM MOUNT +3/-3° - SWISS 7075 T6
322440 (opens in new tab)ALU ANTI-ROLL BAR COLLAR
322484XT2'23 FRONT ANTI-ROLL BAR 1.4MM
322486XT2'23 FRONT ANTI-ROLL BAR 1.6MM
322488XT2'23 FRONT ANTI-ROLL BAR 1.8MM
322515 (opens in new tab)COMPOSITE STEERING ARM FOR 1-PIECE CHASSIS (2)
322516 (opens in new tab)ALU STEERING ARM FOR 1-PIECE CHASSIS - SWISS 7075 T6 (2)
322552 (opens in new tab)ALU STEERING PIVOT SHAFT 14.8MM - SWISS 7075 T6 (2)
322574 (opens in new tab)COMPOSITE STEERING PLATE FOR 1-PIECE CHASSIS
322575 (opens in new tab)ALU STEERING PLATE FOR 1-PIECE CHASSIS - SET
322590 (opens in new tab)ALU SHIM 3x4.7x1.0MM (10)
322591 (opens in new tab)ALU SHIM 3x4.7x0.5MM (10)
322660 (opens in new tab)COMPOSITE BALL JOINT 5.4MM (12+1 +1)
323026COMPOSITE 5G GEAR BOX - SET
323026-G (opens in new tab)COMPOSITE 5G GEAR BOX - GRAPHITE - SET
323029COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - SET
323029-G (opens in new tab)COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - GRAPHITE - SET
323043-H (opens in new tab)ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR COLLAR - REINFORCED
323043-L (opens in new tab)ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR COLLAR - 7075 T6
323044COMPOSITE REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR
323044-G (opens in new tab)COMPOSITE REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR - GRAPHITE
323095XT2 CARBON SHOCK TOWER FOR BRIDGE UPPER DECK - LOWER - REAR
323116-GXT2 COMPOSITE SUSPENSION ARM REAR LOWER - 4-HOLE - SOLID - GRAPHITE
323116-HXT2 COMPOSITE SUSPENSION ARM REAR LOWER - 4-HOLE - SOLID - HARD
323116-MXT2 COMPOSITE SUSPENSION ARM REAR LOWER - 4-HOLE - SOLID - MEDIUM
323316 (opens in new tab)ALU REAR LOWER SUSPENSION HOLDER FOR CHASSIS BRACE - FRONT
323326 (opens in new tab)ALU REAR LOWER SUSP. HOLDER 1° FOR BENT SIDES CHASSIS - REAR
323327 (opens in new tab)ALU REAR LOWER SUSPENSION HOLDER 3° - WIDER - REAR
323354-G (opens in new tab)COMPOSITE UPRIGHT REAR - UPPER POSITION - GRAPHITE
323354-H (opens in new tab)COMPOSITE UPRIGHT REAR - UPPER POSITION - HARD
323354-M (opens in new tab)COMPOSITE UPRIGHT REAR - UPPER POSITION - MEDIUM
323355 (opens in new tab)ALU MULTI ADJUSTABLE REAR UPRIGHT - UPPER POSITION - SWISS 7075 T6
323356 (opens in new tab)ALU MULTI ADJUSTABLE REAR UPRIGHT - LOWER POSITION - SWISS 7075 T6
323357-G (opens in new tab)COMPOSITE UPRIGHT REAR - LOWER POSITION - GRAPHITE
323357-M (opens in new tab)COMPOSITE UPRIGHT REAR - LOWER POSITION - MEDIUM
323358 (opens in new tab)ALU MULTI ADJUSTABLE REAR UPRIGHT - EXTRA LOWER POSITION
323382 (opens in new tab)ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT - 1-HOLE - SWISS 7075 T6
323400 (opens in new tab)XB2 ANTI-ROLL BAR REAR 1.0MM SET
323520 (opens in new tab)XT2 LEXAN REAR WING - HIGH
323521 (opens in new tab)XT2 LEXAN REAR WING - LOW
323551 (opens in new tab)XT2 COMPOSITE REAR BODY MOUNT (2)
324016-L (opens in new tab)ALU MOTOR PLATE FOR 3G GEAR BOX -1MM - 1 DOT - SWISS 7075 T6
324017 (opens in new tab)CARBON MOTOR PLATE - LCG
324018 (opens in new tab)ALU MOTOR PLATE FOR 5G GEAR BOX - SWISS 7075 T6
324052COMPOSITE GEAR COVER - LCG
324103 (opens in new tab)SLIPPER ELIMINATOR - LCG - ULTRA-LIGHTWEIGHT - SET
324113 (opens in new tab)ALU 3-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED
324116 (opens in new tab)XB2 2024 LCG ALUMINUM SHORT 2-PAD TOP SHAFT (20T) (ULTRA-LIGHTWEIGHT)
324120 (opens in new tab)ALU 3-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6 - HARD COATED
324123 (opens in new tab)ALU SLIPPER ELIMINATOR SPACER - SWISS 7075 T6
324126 (opens in new tab)ALU 2-PAD SLIPPER CLUTCH PLATE - SHORT - SWISS 7075 T6
324128 (opens in new tab)ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
324129 (opens in new tab)ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
324172 (opens in new tab)COMPOSITE ADJUSTMENT BALL-BEARING HUB - 1+2 +3 DOTS (2)
324190 (opens in new tab)ALU 3-PAD SLIPPER CLUTCH SHIM
324191 (opens in new tab)STEEL SLIPPER CLUTCH NUT - HUDY SPRING STEEL™
324225 (opens in new tab)COMPOSITE GEAR 25T - GRAPHITE
324225-G (opens in new tab)SPECIAL HIGH RESISTANT COMPOSITE GEAR 25T
324225-PULTRA DURABLE GEAR 25T - MACHINED
324238 (opens in new tab)COMPOSITE GEAR 38T - LCG - GRAPHITE
324238-PULTRA DURABLE GEAR 38T - MACHINED
324325 (opens in new tab)ALU GEAR 25T - HARD COATED - SWISS 7075 T6
324903 (opens in new tab)GEAR DIFFERENTIAL - LCG - NARROW - SET
324903-L (opens in new tab)GEAR DIFFERENTIAL - LCG - NARROW - LIGHTWEIGHT - SET
324912 (opens in new tab)COMPOSITE GEAR DIFFERENTIAL COVER - LCG - NARROW
324912-G (opens in new tab)COMPGEAR DIFFERENTIAL COVER - LCG - NARROW - GRAPHITE
324955 (opens in new tab)COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG - NARROW
324955-G (opens in new tab)COMP.GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG - NARROW - GRAPHITE
324963 (opens in new tab)GEAR DIFF OUTDRIVE ADAPTER - LCG - FOR NARROW DIFF(2)
324964 (opens in new tab)GEAR DIFF OUTDRIVE ADAPTER - LCG - FOR NARROW DIFF - LIGHTWEIGHT (2)
324990 (opens in new tab)DIFF GASKET (4)
325003 (opens in new tab)BALL ADJUSTABLE DIFFERENTIAL - LCG - SET - HUDY SPRING STEEL™
325013 (opens in new tab)BALL DIFFERENTIAL SHORT OUTPUT SHAFT - LCG - HUDY SPRING STEEL™
325023 (opens in new tab)BALL DIFFERENTIAL LONG OUTPUT SHAFT - LCG - HUDY SPRING STEEL™
325053 (opens in new tab)COMPOSITE BALL DIFFERENTIAL GEAR 53T
325061 (opens in new tab)SCREW FOR EXTERNAL BALL DIFF ADJUSTMENT 2.5MM - HUDY SPRING STEEL™
325072 (opens in new tab)ALU BALL DIFFERENTIAL 2.5MM NUT
325101 (opens in new tab)XRAY XB2 ACTIVE DIFFERENTIAL - NARROW - SET
325123 (opens in new tab)ACTIVE DIFF SEGMENT 60° (2)
325125 (opens in new tab)ACTIVE DIFF SEGMENT 90° (2)
325127 (opens in new tab)ACTIVE DIFF SEGMENT 120° (2)
325130 (opens in new tab)ACTIVE DIFF STEEL BEVEL & SATELLITE GEARS (2 +4)
325241XT2 FRONT DRIVE AXLE - HUDY SPRING STEEL™
325313 (opens in new tab)DRIVE SHAFT 97MM WITH 2.5MM PIN - HUDY SPRING STEEL™
325340 (opens in new tab)REAR DRIVE AXLE LB - HUDY SPRING STEEL™
325341-L (opens in new tab)REAR ADJUSTABLE DRIVE AXLE LB FOR REAR UPRIGHT - LOWER POSITION
325390ALU SHIM 10x12x2MM (2)
325391 (opens in new tab)ALU SHIM 10x12x1 MM (2)
325869 (opens in new tab)SLIPPER ELIMINATOR COMPOSITE SPUR GEAR 69T / 48
325872 (opens in new tab)SLIPPER ELIMINATOR COMPOSITE SPUR GEAR 72T / 48
326149 (opens in new tab)CARBON PLATE FOR ELECTRONICS FOR 1-PIECE CHASSIS - SET
326152 (opens in new tab)STAINLESS STEEL WEIGHT FOR ELECTRONICS FOR 1-PIECE CHASSIS 30g
326153 (opens in new tab)STAINLESS STEEL WEIGHT UNDER SERVO FOR 1-PIECE CHASSIS 13g
326162 (opens in new tab)SELF-ADHESIVE FOAM 1.5x6.5x87MM (2)
326163 (opens in new tab)SELF-ADHESIVE FOAM 2x6.5x87MM (2)
326176-L (opens in new tab)COMPOSITE LIPO BATTERY HOLDER - LONG (2+2)
326177 (opens in new tab)COMPOSITE BATTERY CLAMP (2)
326178 (opens in new tab)CARBON BATTERY BACKSTOP - LOWER (2)
326181 (opens in new tab)STAINLESS STEEL BATTERY WEIGHT 35G
326200 (opens in new tab)COMPOSITE STEERING SERVO ARMS - EXTENDED - 23T + 25T
326202 (opens in new tab)ALU SERVO HOLDERS & CARBON BRIDGE
326240 (opens in new tab)COMPOSITE FAN HOLDER
327210 (opens in new tab)FRONT SUSPENSION PIVOT PIN (2)
327220 (opens in new tab)FRONT ARM PIVOT PIN (2)
327321 (opens in new tab)REAR ARM PIVOT PIN 3x34MM(2)
329000 (opens in new tab)XB2 SET OF HIGH-SPEED BALL-BEARINGS (24)
329300 (opens in new tab)XB2 MOUNTING HARDWARE PACKAGE - SET
329722BODY 1/10 2WD STADIUM TRUCK - LOWER
329723BODY 1/10 2WD STADIUM TRUCK - LOWER - LIGHTWEIGHT
329902 (opens in new tab)STADIUM TRUCK WHEEL AERODISK WITH 12MM HEX - WHITE (10)
329912 (opens in new tab)STADIUM TRUCK WHEEL AERODISK WITH 12MM HEX - WHITE (2)
335030DIFF BEVEL & SATELLITE GEARS (2+ 4)
335031 (opens in new tab)DIFF BEVEL & SATELLITE GEARS FOR O-RINGS - SET
335080DIFF PIN (2)
335081 (opens in new tab)ALU DIFF PIN - HARD COATED (2)
336120COMPOSITE STEERING SERVO HOLDER - SET - V2
352460 (opens in new tab)PIVOT BALL 5.8 (10)
355180ACTIVE DIFF PIN (2)
356219COMPOSITE SERVO SHIMS 1.0, 1.5 & 2.5MM (2+ 2+ 2)
359050 (opens in new tab)BALL-BEARING 5x10x4 STEEL SEALED - GREASE - V2 (2)
359051 (opens in new tab)BALL-BEARING 5x12x4 STEEL SEALED - GREASE (2)
362280 (opens in new tab)ALU CONICAL SHIM 3x6x2.0MM (10)
362280-K (opens in new tab)ALU CONICAL SHIM 3x6x2.0MM - BLACK (10)
362280-O (opens in new tab)ALU CONICAL SHIM 3x6x2.0MM - ORANGE (10)
362290 (opens in new tab)STEEL STEERING BUSHING - SHORT - NICKEL COATED (2)
362291 (opens in new tab)STEEL STEERING BUSHING - LONG - NICKEL COATED (2)
362315 (opens in new tab)CLOSED ECCENTRIC BUSHING SET (2)
362316 (opens in new tab)OPEN ECCENTRIC BUSHING SET (2)
362470 (opens in new tab)ANTI-ROLL BAR 1.0MM
362471 (opens in new tab)ANTI-ROLL BAR 1.1MM
362472 (opens in new tab)ANTI-ROLL BAR 1.2MM
362473 (opens in new tab)ANTI-ROLL BAR 1.3MM
362474 (opens in new tab)ANTI-ROLL BAR 1.4MM
362476 (opens in new tab)ANTI-ROLL BAR 1.6MM
362478 (opens in new tab)ANTI-ROLL BAR 1.8MM
362480ANTI-ROLL BAR 2.0MM
362649 (opens in new tab)BALL END 4.9MM WITH 5MM THREAD (2)
362650 (opens in new tab)BALL END 4.9MM WITH 6MM THREAD (2)
362651 (opens in new tab)BALL END 4.9MM WITH 8MM THREAD (2)
362652 (opens in new tab)BALL END 4.9MM WITH 10MM THREAD (2)
362654 (opens in new tab)HARD STEEL BALL END 5.4MM WITH 4MM THREAD - NICKEL COATED (2)
362656 (opens in new tab)HARD STEEL BALL END 5.4MM WITH 6MM THREAD - NICKEL COATED (2)
362658 (opens in new tab)HARD STEEL BALL END 5.4MM WITH 8MM THREAD - NICKEL COATED (2)
362660 (opens in new tab)HARD STEEL BALL END 5.4MM WITH 10MM THREAD - NICKEL COATED (2)
363241 (opens in new tab)BALL UNIVERSAL 5.75MM WITH BACKSTOP (2)
363242 (opens in new tab)PIVOT BALL 5.8MM ECCENTRIC (2)
364131 (opens in new tab)SLIPPER CLUTCH PAD SLS - SOFT (3)
364132 (opens in new tab)SLIPPER CLUTCH PAD BLACK - MEDIUM (2)
364140ALU 3-PAD SLIPPER CLUTCH PLATE DISC - 7075 T6 HARD COATED
364180 (opens in new tab)SLIPPER CLUTCH SPRING C=30 - BLACK
364181 (opens in new tab)SLIPPER CLUTCH SPRING C =45 - BLACK
365080 (opens in new tab)BALL DIFF WASHER 17 x 24.5 x 1 (2)
365230 (opens in new tab)DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
365351 (opens in new tab)ALU WHEEL HUB 14MM - OFFSET -0.75MM (2)
365353 (opens in new tab)ALU WHEEL HUB 12MM - O SLOTS - V2 (2)
365354 (opens in new tab)ALU WHEEL HUB 12MM - LIGHTWEIGHT - OFFSET -0.75MM (2)
365355 (opens in new tab)ALU WHEEL HUB 12MM - 1 SLOT - OFFSET +0.75MM (2)
365356 (opens in new tab)ALU WHEEL HUB 12MM - 2 SLOTS - OFFSET +1.50MM (2)
365357 (opens in new tab)ALU WHEEL HUB 12MM - 3 SLOTS - OFFSET +2.25MM (2)
365358 (opens in new tab)ALU WHEEL HUB 12MM - 4 SLOTS - OFFSET +3.00MM (2)
365359 (opens in new tab)ALU WHEEL HUB 12MM - 5 SLOTS - OFFSET +3.75MM (2)
365360 (opens in new tab)ALU WHEEL HUB 12MM - 6 SLOTS - OFFSET +4.5MM (2)
365361 (opens in new tab)ALU WHEEL HUB 12MM - LIGHTWEIGHT - OFFSET -1.25MM (2)
365726 (opens in new tab)ALU PINION GEAR - HARD COATED 26T / 48
365727 (opens in new tab)ALU PINION GEAR - HARD COATED 27T / 48
365728 (opens in new tab)ALU PINION GEAR - HARD COATED 28T / 48
365729 (opens in new tab)ALU PINION GEAR - HARD COATED 29T / 48
365730 (opens in new tab)ALU PINION GEAR - HARD COATED 30T / 48
365731ALU PINION GEAR - HARD COATED 31T / 48
365732 (opens in new tab)ALU PINION GEAR - HARD COATED 32T / 48
365733 (opens in new tab)ALU PINION GEAR - HARD COATED 33T / 48
365734ALU PINION GEAR - HARD COATED 34T / 48
365735ALU PINION GEAR - HARD COATED 35T / 48
365736ALU PINION GEAR - HARD COATED 36T / 48
365737ALU PINION GEAR - HARD COATED 37T / 48
365738ALU PINION GEAR - HARD COATED 38T / 48
365872 (opens in new tab)COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 72T / 48
365875 (opens in new tab)COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 75T / 48
365878 (opens in new tab)COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 78T / 48
365881 (opens in new tab)COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48
365884 (opens in new tab)COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 84T / 48
366202 (opens in new tab)COMPOSITE SERVO MOUNT - HIGHER
367210 (opens in new tab)SUSPENSION PIVOT PIN (2)
368011 (opens in new tab)COMPOSITE SHOCK BALL JOINT + 2MM & +4MM (2+2)
368014-S (opens in new tab)COMPOSITE SHORT SHOCK CAP, SPRING COLLAR & BALL JOINT - BIG BORE (2)
368021 (opens in new tab)ALU SHOCK SPRING RETAINING COLLAR (4)
368022 (opens in new tab)ALU SHOCK SPRING RETAINING COLLAR -2MM (4)
368023 (opens in new tab)ALU SHOCK SPRING RETAINING COLLAR -4MM (4)
368024 (opens in new tab)COMPOSITE SPRING COLLAR -2MM & -4MM - BIG BORE (2+2)
368027 (opens in new tab)ALU SHOCK SPRING RETAINING COLLAR -6MM (4)
368028 (opens in new tab)COMPOSITE SPRING COLLAR 0MM & -6MM - BIG BORE (2+2)
368032 (opens in new tab)SHOCK PISTONS - COMPLETE SET - DELRIN - BIG BORE
368033 (opens in new tab)PRECISION GROUND SHOCK PISTON BLANKS 2.5MM - BIG BORE (4)
368034 (opens in new tab)PRECISION GROUND SHOCK PISTON BLANKS 2.0MM - BIG BORE (4)
368041 (opens in new tab)STEEL SHOCK BUSHING FOR ALU CAP (2)
368042COMPOSITE SHOCK BUSHING & SHIM FOR ALU CAP (2+2)
368045STEEL SHOCK STANDOFFS (2)
368045-T (opens in new tab)XRAY TITANIUM SHOCK STANDOFFS (2)
368049 (opens in new tab)ALU SHOCK ADJUSTABLE NUT - BIG BORE (2)
368054 (opens in new tab)ALU SHOCK CAP-NUT WITH VENT HOLE - BIG BORE (2)
368122 (opens in new tab)ALU FRONT SHOCK BODY - BIG BORE (2)
368140 (opens in new tab)ALU LOWER SHOCK BODY CAP (2)
368161 (opens in new tab)FRONT HARDENED SHOCK SHAFT 42MM (2)
368222 (opens in new tab)ALU REAR SHOCK BODY - BIG BORE (2)
368262 (opens in new tab)REAR HARDENED SHOCK SHAFT 47MM (2)
368381 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 1 DOT (2)
368382 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 2 DOTS (2)
368383 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 3 DOTS (2)
368384 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 4 DOTS (2)
368385 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 5 DOTS (2)
368392 (opens in new tab)FRONT BIG BORE CONICAL SPRING-SET L=49MM - 2 DOTS (2)
368481 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 1 DOT (2)
368482 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 2 DOTS (2)
368483 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 3 DOTS (2)
368484 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 4 DOTS (2)
368485 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 5 DOTS (2)
368492 (opens in new tab)REAR BIG BORE CONICAL SPRING-SET L=67MM - 2 DOTS (2)
372503 (opens in new tab)COMPOSITE SERVO SAVER - X-STIFF - SET - V2
397311 (opens in new tab)XRAY STICKER FOR BODY - WHITE

Screws, bearings, o-rings and hardware (65)

Part #Description
901303 (opens in new tab)HEX SCREW SB M3x3 (10)
901304 (opens in new tab)HEX SCREW SB M3x4 (10)
901306 (opens in new tab)3X6MM SET SCREW (10)
901308 (opens in new tab)HEX SCREW SB M3x8 (10)
901310 (opens in new tab)3X10MM SET SCREW (10)
902205 (opens in new tab)HEX SCREW SH M2x5 (10)
902254 (opens in new tab)HEX SCREW SH M2.5x4 (10)
902258HEX SCREW SH M2.5x8 (10)
902305 (opens in new tab)HEX SCREW SH M3x5 (10)
902306 (opens in new tab)HEX SCREW SH M3x6 (10)
902308 (opens in new tab)HEX SCREW SH M3x8 (10)
902310 (opens in new tab)HEX SCREW SH M3x10 (10)
902312 (opens in new tab)HEX SCREW SH M3x12 (10)
902314 (opens in new tab)HEX SCREW SH M3x14 (10)
902316 (opens in new tab)HEX SCREW SH M3x16 (10)
902318 (opens in new tab)HEX SCREW SH M3x18 (10)
902322 (opens in new tab)HEX SCREW SH M3x22 (10)
902325HEX SCREW SH M3x25 (10)
903305 (opens in new tab)HEX SCREW SFH M3x5 (10)
903308 (opens in new tab)HEX SCREW SFH M3x8 (10)
903310 (opens in new tab)HEX SCREW SFH M3x10 (10)
903312 (opens in new tab)HEX SCREW SFH M3x12 (10)
903316 (opens in new tab)HEX SCREW SFH M3x16 (10)
913203HEX SCREW SFH M2x3 110°
930120CARBIDE BALL 2.4MM FOR BALL DIFFERENTIAL (12)
930126CARBIDE BALL-BEARING AXIAL 2.6x6x1
930220CERAMIC BALL 2.4MM (12)
930306 (opens in new tab)BALL-BEARING 3x6x2.5 STEEL SEALED - OIL (2)
930308 (opens in new tab)BALL-BEARING 3x8x4 STEEL SEALED - OIL (2)
930508 (opens in new tab)BALL-BEARING 5x8x2.5 STEEL SEALED - OIL (2)
940508 (opens in new tab)BALL-BEARING 5x8x2.5 RUBBER SEALED - OIL (2)
940509BALL-BEARING 5x9x3 RUBBER SEALED - OIL (2)
940510 (opens in new tab)BALL-BEARING 5x10x4 RUBBER SEALED - OIL (2)
940512 (opens in new tab)BALL-BEARING 5x12x4 RUBBER SEALED - OIL (2)
940513 (opens in new tab)BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
940612 (opens in new tab)BALL-BEARING 6x12x4 RUBBER SEALED - OIL (2)
941014 (opens in new tab)BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)
941015 (opens in new tab)BALL-BEARING 10x15x4 RUBBER SEALED - OIL (2)
960030 (opens in new tab)NUT M3 (10)
960031 (opens in new tab)ALU NUT M3 (10)
960032NUT M3 - BLACK (10)
960040NUT M4 (10)
960240 (opens in new tab)NUT M4 WITH SERRATED FLANGE (10)
961032 (opens in new tab)WASHER S 3.2 (10)
962030 (opens in new tab)WASHER S 3x6x0.3 (10)
962031 (opens in new tab)WASHER S 3x6x0.1 (10)
962032 (opens in new tab)WASHER S 3x6x0.2 (10)
962034WASHER S 3x4.7x1 (10)
962100WASHER S 10x12x0.1 (10)
964031 (opens in new tab)WASHER S 3.5x10x0.2 (10)
964033 (opens in new tab)WASHER S 3.5x10x0.3 (10)
964050 (opens in new tab)WASHER S 5x15x0.3 (10)
965023 (opens in new tab)E-CLIP 2.3 (10)
970080 (opens in new tab)O-RING 8x1 (10)
970131 (opens in new tab)O-RING 13 x 1.0 (10)
970150 (opens in new tab)O-RING 15 x 1.5 (10)
971032 (opens in new tab)SILICONE O-RING 3.2x0.8 (10)
971050 (opens in new tab)SILICONE O-RING 5x1.5 (10)
973030 (opens in new tab)SILICONE X-RING PRE-OILED 3x2 (8)
980209 (opens in new tab)PIN 2x8.8 (10)
980210 (opens in new tab)PIN 2x9.8 (10)
980320PIN 3x20 (10)
980320-T (opens in new tab)TITANIUM PIN 3x20 (2)
981210PIN 2x10 (10)
981212 (opens in new tab)PIN 2x12 (10)

Tools, oils and setup equipment (228)

Part #Description
104004 (opens in new tab)HUDY AIR VAC - VACUUM PUMP - 1/10 OFF-ROAD
105251-K (opens in new tab)HUDY TIRE MOUNTING BAND - LARGE - BLACK (4)
105500 (opens in new tab)HUDY UNIVERSAL TIRE BALANCING STATION - V2
105520WHEEL ADAPTER FOR 1/10 ON-ROAD & 1/10 OFF-ROAD - 12MM
105590 (opens in new tab)HUDY WHEEL BALANCING PUTTY
106000 (opens in new tab)HUDY DRIVE PIN REPLACEMENT TOOL (FOR 3MM PINS)
106036EJECTOR PIVOT PIN & ALTERNATING PIVOT 2.5MM FOR #106000
106053HUDY DRIVE PIN 2.5 x 10MM
106200 (opens in new tab)HUDY MAGIC CLEANING GUM
106205 (opens in new tab)HUDY WASH BOX
106210 (opens in new tab)HUDY GRAPHITE GREASE
106211 (opens in new tab)HUDY DIFF GREASE
106212 (opens in new tab)HUDY SUPER DIFF GREASE
106213 (opens in new tab)HUDY JOINT GREASE
106220 (opens in new tab)HUDY BEARING GREASE
106221 (opens in new tab)HUDY BEARING GREASE - BLUE
106222 (opens in new tab)HUDY BEARING GREASE - RED
106230 (opens in new tab)HUDY BEARING OIL
106290HUDY ULTIMATE SOLDER 3M LENGTH
106321HUDY PREMIUM SILICONE OIL 200 cSt - 100ML
106326HUDY PREMIUM SILICONE OIL 250 cSt - 100ML
106330HUDY PREMIUM SILICONE OIL 300 cSt - 50ML
106331HUDY PREMIUM SILICONE OIL 300 cSt - 100ML
106336HUDY PREMIUM SILICONE OIL 350 cSt - 100ML
106338HUDY PREMIUM SILICONE OIL 375 cSt - 100ML
106340HUDY ULTIMATE SILICONE OIL 400 cSt - 50ML
106341HUDY PREMIUM SILICONE OIL 400 cSt - 100ML
106343HUDY PREMIUM SILICONE OIL 425 cSt - 100ML
106346HUDY PREMIUM SILICONE OIL 450 cSt - 100ML
106348HUDY PREMIUM SILICONE OIL 475 cSt - 100ML
106351HUDY PREMIUM SILICONE OIL 500 cSt - 100ML
106353HUDY PREMIUM SILICONE OIL 525 cSt - 100ML
106356HUDY PREMIUM SILICONE OIL 550 cSt - 100ML
106358HUDY PREMIUM SILICONE OIL 575 cSt - 100ML
106361HUDY PREMIUM SILICONE OIL 600 cSt - 100ML
106440HUDY PREMIUM SILICONE OIL 4000 cSt - 50ML
106450HUDY PREMIUM SILICONE OIL 5000 cSt - 50ML
106460 (opens in new tab)HUDY PREMIUM SILICONE OIL 6000 cSt - 50ML
106470HUDY PREMIUM SILICONE OIL 7000 cSt - 50ML
106480HUDY PREMIUM SILICONE OIL 8000 cSt - 50ML
106490HUDY PREMIUM SILICONE OIL 9000 cSt - 50ML
106492HUDY PREMIUM SILICONE OIL 11 000 cSt - 50ML
106510HUDY PREMIUM SILICONE OIL 10 000 cSt - 50ML
106512HUDY PREMIUM SILICONE OIL 12 000 cSt - 50ML
106513HUDY PREMIUM SILICONE OIL 13 000 cSt - 50ML
106515HUDY PREMIUM SILICONE OIL 15 000 cSt - 50ML
106517 (opens in new tab)HUDY PREMIUM SILICONE OIL 17 000 cSt - 50ML
106520HUDY PREMIUM SILICONE OIL 20 000 cSt - 50ML
106530HUDY PREMIUM SILICONE OIL 30 000 cSt - 50ML
106540HUDY PREMIUM SILICONE OIL 40 000 cSt - 50ML
106550HUDY PREMIUM SILICONE OIL 50 000 cSt - 50ML
106560HUDY PREMIUM SILICONE OIL 60 000 cSt - 50ML
106580HUDY PREMIUM SILICONE OIL 80 000 cSt - 50ML
106610HUDY PREMIUM SILICONE OIL 100 000 cSt - 50ML
106615HUDY PREMIUM SILICONE OIL 150 000 cSt - 50ML
106900 (opens in new tab)HUDY OIL BOTTLE, NOSE, STEEL NEEDLE & SAFETY LOCK - 5ML (3)
107090 (opens in new tab)HUDY BEARING CHECK TOOL
107601LIMITED EDITION - REAMER FOR BODY 0-9MM + COVER - SMALL
107602LIMITED EDITION - REAMER FOR BODY + COVER - LARGE
107643LIMITED EDITION - ARM REAMER 3.0 MM
107701CHASSIS DROOP GAUGE SUPPORT BLOCKS 20MM FOR 1/8 - LW(2)
107740 (opens in new tab)HUDY RIDE HEIGHT TOOL 14-20MM
107742 (opens in new tab)HUDY RIDE HEIGHT TOOL 20-30MM
107761 (opens in new tab)HUDY ADJUSTABLE CAMBER GAUGE 80MM
107763 (opens in new tab)HUDY ADJUSTABLE RIDE HEIGHT GAUGE 5-40MM
107783 (opens in new tab)HUDY DROOP GAUGE 70~140MM
107839 (opens in new tab)HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.5°
107840 (opens in new tab)CLEANING BRUSH LARGE - SOFT
107841 (opens in new tab)CLEANING BRUSH LARGE - MEDIUM
107842 (opens in new tab)CLEANING BRUSH LARGE - STIFF
107843 (opens in new tab)HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.0°
107846 (opens in new tab)CLEANING BRUSH SMALL - SOFT
107847 (opens in new tab)CLEANING BRUSH SMALL - MEDIUM
107848CLEANING BRUSH SMALL - STIFF
107850 (opens in new tab)HUDY PERSONAL RACING DISPLAY
107855HUDY PIT LED
107865 (opens in new tab)HUDY ULTIMATE DIGITAL SCALE 300g/0.01g
107866HUDY PROFFESIONAL DIGITAL POCKET SCALE 3000g/0.1g
107870 (opens in new tab)HUDY FIBRE-REINFORCED TAPE - BLACK
107875HUDY ULTRA DOUBLE-SIDED TAPE
107876 (opens in new tab)HUDY ULTRA THIN DOUBLE-SIDED TAPE - SINGLE STRIP (5)
107880CHASSIS BALANCING SIMPLE TOOL (2 PCS.)
108160 (opens in new tab)HUDY 1/10 OFF-ROAD CAR STAND
108190HUDY ALU PARTS TRAY
108192 (opens in new tab)HUDY ALU PARTS TRAY NARROW 215x50mm
108193 (opens in new tab)HUDY ALU PARTS TRAY LARGE 215x100mm
108203FLAT SET-UP BOARD FOR 1/10 TOURING CARS - SILVER GREY
108204FLAT SET-UP BOARD FOR 1/10 TOURING CARS - TITAN
108205FLAT SET-UP BOARD FOR 1/10 TOURING CARS - DARK GREY
108601FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - GREY
108602FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - SILVER GREY
108603FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - DARK GREY
108604FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - TITAN
108605FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - BLACK
108660 (opens in new tab)PLASTIC SET-UP BOARD DECAL 331x386mm - 1/0 OFF-ROAD
108840HUDY UPSIDE MEASURE PLATE FOR 1/10 TRUCK
108901 (opens in new tab)HUDY SET-UP STATION FOR 1/10 OFF-ROAD CARS
108951 (opens in new tab)SET-UP STATION & SET-UP TOOLS + CARRYING BAG FOR 1/10 OFF-ROAD CARS
108960ALU NUT FOR 1/10 OFF-ROAD SET-UP SYSTEM (4)
109801 (opens in new tab)HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF & SHOCKS
109840 (opens in new tab)HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF ASSEMBLY
109860 (opens in new tab)HUDY ALU TRAY FOR SET-UP SYSTEM
109880 (opens in new tab)HUDY ALU TRAY FOR ACCESSORIES & PIT LED
111063 (opens in new tab)LIMITED EDITION - UNIVERSAL HANDLE FOR EL. SCREWDRIVER PINS
111545LIMITED EDITION - ALLEN WRENCH 1.5 MM
112045LIMITED EDITION - ALLEN WRENCH 2.0 MM
113045 (opens in new tab)LIMITED EDITION - ALLEN WRENCH 3.0 MM
132045LIMITED EDITION - ALLEN WRENCH + BALL REPL. TIP # 2.0MM
153055LIMITED EDITION - SLOTTED SCREWDRIVER # 3.0MM - LONG
170004 (opens in new tab)HUDY SHORT SOCKET WRENCH # 5.5MM
175535LIMITED EDITION - SOCKET DRIVER 5.5 MM
177035LIMITED EDITION - SOCKET DRIVER 7.0 MM
181030 (opens in new tab)HUDY SPRING STEEL TURNBUCKLE WRENCH 3MM
181035HUDY SPRING STEEL TURNBUCKLE WRENCH 3.5MM
181036ALU TURNBUCKLE WRENCH 3.5MM - SWISS 7075 T6
181090 (opens in new tab)HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS
181110 (opens in new tab)HUDY BALL JOINT WRENCH
183011HUDY PROFESSIONAL MULTI TOOL
188970 (opens in new tab)HUDY PROFESSIONAL TWEEZERS STRAIGHT
188971 (opens in new tab)HUDY PROFESSIONAL TWEEZERS CURVED
188981HUDY POCKET HOBBY KNIFE
188990 (opens in new tab)HUDY ULTIMATE BODY SCISSORS
189010HUDY SIDE CUTTERS
190001 (opens in new tab)SET OF TOOLS + CARRYING BAG - FOR ELECTRIC TOURING CARS
190005 (opens in new tab)HUDY LIMITED EDITION TOOL SET + CARRYING BAG
190006 (opens in new tab)PT SET OF TOOLS + CARRYING BAG - FOR ALL CARS
190070 (opens in new tab)SET OF POWER TOOL TIPS 2.0, 2.5, 3.00MM + 4.0, 5.8 PHILLIPS
199011-H (opens in new tab)HUDY HARD CASE - 230x180x45MM - TOOL BAG SMALL
199060 (opens in new tab)HUDY ALU TOOL STAND
199100 (opens in new tab)HUDY 1/10 TOURING CARRYING BAG + TOOL BAG - V2 - EXCLUSIVE EDITION
199110 (opens in new tab)HUDY 1/10 CARRYING BAG - COMPACT
199120 (opens in new tab)HUDY 1/10 & 1/8 CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION
199155L (opens in new tab)HUDY TRAVEL BAG - LARGE
199170 (opens in new tab)HUDY TRANSMITTER BAG - LARGE - EXCLUSIVE EDITION
199171 (opens in new tab)HUDY TRANSMITTER BAG - COMPACT - EXCLUSIVE EDITION
199175 (opens in new tab)HUDY RADIO WINTER BAG - EXCLUSIVE EDITION
199176 (opens in new tab)HUDY HEAT PACK GEL
199183 (opens in new tab)HUDY CAR BAG - 1/10 OFF-ROAD
199190 (opens in new tab)HUDY TEAM RUCKSACK
199199HUDY EURO POUCH
199211 (opens in new tab)HUDY SET-UP BOARD BAG 1/10 OFF-ROAD
199241 (opens in new tab)HUDY SET-UP BAG FOR 1/10 & 1/8 OFF-ROAD CARS & GT
199260 (opens in new tab)HUDY PIT LED BAG
199270 (opens in new tab)HUDY LIPO SAFETY BAG
199280L (opens in new tab)HUDY OIL BAG - LARGE
199280M (opens in new tab)HUDY OIL BAG - MEDIUM
199290 (opens in new tab)HUDY ACCESSORIES BAG
199290-H (opens in new tab)HUDY HARD CASE - 235x190x75MM
199291-H (opens in new tab)HUDY HARD CASE - 135x85x75MM - ACCESSORIES / AIR VAC ON-ROAD
199292-H (opens in new tab)HUDY HARD CASE - 175x85x75MM - ACCESSORIES / AIR VAC 1/10 OFF-ROAD
199293-H (opens in new tab)HUDY HARD CASE - 175x110x75MM
199294-H (opens in new tab)HUDY HARD CASE - 215x90x85MM - ACCESSORIES / AIR VAC 1/8 OFF-ROAD
199295-H (opens in new tab)HUDY HARD CASE - 280x150x85MM - ACCESSORIES BAG LARGE
199296-H (opens in new tab)HUDY HARD CASE - 120x85x46MM - ACCESSORIES / STOP WATCH
199297-H (opens in new tab)HUDY HARD CASE - 320x220x145MM - ELECTRONICS
199910 (opens in new tab)HUDY PIT MAT 750x1200MM
199911 (opens in new tab)HUDY PIT MAT ROLL 750x1200MM
199912 (opens in new tab)HUDY PIT MAT ROLL 600x950MM
199913L (opens in new tab)HUDY PIT MAT FULL COLOR 650x1200MM
199913M (opens in new tab)HUDY PIT MAT FULL COLOR 650x950MM
209073 (opens in new tab)HUDY EXCLUSIVE PIT TOWEL 1100 x 700
209100HUDY SET-UP BOOK
209200 (opens in new tab)HUDY CHASSIS PROTECTOR VINYL STICKER 360x125mm
293010HUDY STAINLESS STEEL BATTERY WEIGHT 50G
293011 (opens in new tab)HUDY STAINLESS STEEL BATTERY WEIGHT 35G
293080 (opens in new tab)LEAD WEIGHTS 4x5g & 4x10g WITH 3M GLUE
293081 (opens in new tab)HUDY PURE TUNGSTEN WEIGHT 5g
293082 (opens in new tab)HUDY PURE TUNGSTEN WEIGHT 10g
293085 (opens in new tab)HUDY PURE TUNGSTEN WEIGHT - 10G
293100HUDY ALU RC FAN 30MM - BOTTOM MOUNT 2 HOLE
293101HUDY ALU RC FAN 30MM - SIDE MOUNT 2 HOLE
293110 (opens in new tab)HUDY BRUSHLESS RC FAN 30MM - WITH EXTERNAL SOLDERING TABS
293112 (opens in new tab)HUDY BRUSHLESS RC FAN 30MM - WITH INTERNAL SOLDERING TABS
293499 (opens in new tab)ALU SERVO HORN - FUTABA - 2-HOLE - 25T
293561-K (opens in new tab)HUDY ALUMINUM REAR WING SHIM (BLACK) (2)
294017HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 17T / 48
294018 (opens in new tab)HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 18T / 48
294019 (opens in new tab)HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 19T / 48
294020HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 20T / 48
294021HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 21T / 48
294022HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 22T / 48
294023HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 23T / 48
294024 (opens in new tab)HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 24T / 48
294025 (opens in new tab)HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 25T / 48
296542HUDY TITANIUM NUT M4 WITH SERRATED FLANGE (4)
296542-BHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - BLUE (4)
296542-CHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - RAINBOW COLOR (4)
296542-GHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - GREEN (4)
296542-KHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - BLACK (4)
296542-VHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - VIOLET (4)
296542-YHUDY TITANIUM NUT M4 WITH SERRATED FLANGE - GOLD (4)
298010HUDY HARDWARE BOX - DOUBLE-SIDED
298011 (opens in new tab)HUDY HARDWARE BOX - DOUBLE-SIDED - COMPACT
298012 (opens in new tab)HUDY PARTS BOX - 10-COMPARTMENTS
298013 (opens in new tab)HUDY SPRINGS BOX - 10-COMPARTMENTS
298014 (opens in new tab)HUDY PARTS BOX - 8-COMPARTMENTS
298015 (opens in new tab)HUDY PARTS CASE - 290 x 195mm
298016 (opens in new tab)HUDY TINY HARDWARE BOX - 4-COMPARTMENTS
298017 (opens in new tab)HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS
298018 (opens in new tab)HUDY TINY HARDWARE BOX - 8-COMPARTMENTS
298019 (opens in new tab)HUDY DIFF BOX - 8-COMPARTMENTS
298100 (opens in new tab)HUDY TIN ROUND BOX 80x30MM
325341REAR ADJUSTABLE DRIVE AXLE LB - HUDY SPRING STEEL™
362629ADJUSTABLE TURNBUCKLE 75MM M3.5 L/R - HUDY SPRING STEEL™ (2)
903305-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x5 (10)
903306-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x6 (10)
903308-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x8 (10)
903310-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x10 (10)
903312-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x12 (10)
903316-T (opens in new tab)HUDY TITANIUM FLAT HEAD SCREW M3x16 (4)
908305-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x5 (10)
908306-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x6 (10)
908308-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x8 (10)
908310-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x10 (10)
908312-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x12 (10)
908314-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x14 (4)
908316-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x16 (4)
908318-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x18 (4)
908320-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x20 (4)
908322-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x22 (4)
908325-T (opens in new tab)HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x25 (4)
990006 (opens in new tab)HUDY TITANIUM BALL STUD D=4.9 / L=6 /S=3.5 / 2mm HEX (2)
990008 (opens in new tab)-4.9 / L=8 / S=3.5 / 2mm HEX (2)
990010 (opens in new tab)HUDY TITANIUM BALL STUD D=4.9 / L= 10 / S=3.5 / 2mm HEX (2)
990014 (opens in new tab)HUDY TITANIUM BALL STUD D=5.4 / L=4 /S=4.5 / 2MM HEX (2)
990016 (opens in new tab)HUDY TITANIUM BALL STUD D=5.4 / L=6 / S=4.5 / 2MM HEX (2)
990018 (opens in new tab)HUDY TITANIUM BALL STUD D=5.4 / L=8 / S=4.5 / 2MM HEX (2)
990020 (opens in new tab)HUDY TITANIUM BALL STUD D=5.4 / L= 10 / S=4.5 / 2MM HEX (2)

Have a question?

Ask Miles, our RC Setup AI that’s been trained on the XT2 '28.

Car: XT2 '28

Free, and your first answer needs no sign-in.

Learn more about...

1/10 Off-road
1/10 Off-Road Cars
← Back to Setup Guides