Ask Miles, our Setup AI
Pick your car and ask anything. It’s free.
Team Associated RC10 B84/D
Which rear gearbox height should I use on a Team Associated RC10 B84/D?
Start with 0 mm, the kit default. It’s the safer baseline if you’re not sure; the setting changes rear differential height. Move to +2 mm for carpet or astroturf. B84/D racers...
Oct 14, 2026
HB E819
Настройки шасси
Если вы ищете базовую настройку шасси HB E819, начните с параметров заводской kit-настройки. Это отправная точка для 1/8 4WD багги, а не универсальный рецепт для любого покрытия....
Oct 13, 2026
Tekno SCT410 2.0
What pinion size should I run on a Tekno SCT410 2.0?
What motor are you running (turns or Kv)? If you have a non-stock spur, include its tooth count; otherwise I’ll use the stock spur.
Oct 13, 2026
Team Associated RC10 B6.4
What setup should I use for a Team Associated RC10 B6.4 on high-grip carpet?
For a Team Associated RC10 B6.4 on high-grip carpet, start with carpet tires that suit your track, then tune the chassis around how much grip it has. Carpet grip varies a lot, so...
Oct 13, 2026
XRAY X4 '24
XRAY X4 '24 setup pista asfalto telaio alluminio 1,5 mm?
Per la XRAY X4 ’24 su asfalto, il telaio in alluminio da 1,5 mm è un punto di partenza usato soprattutto con grip medio. Proverei questa base, assumendo grip medio: Convergenza...
Oct 13, 2026
3Racing Sakura D6 Sport
What tires are best for a low-grip drift track on 3Racing Sakura D6 Sport?
For a low-grip drift track, hard plastic drift tires are the usual starting point on the Sakura D6 Sport. Its kit baseline is specifically listed for low-grip cement, and the...
Oct 13, 2026
Kyosho Lazer ZX7.5
What pinion and spur for Kyosho Lazer ZX7.5 with 13.5T motor?
For the Kyosho Lazer ZX7.5 with a 13.5T motor, start with a 25T pinion and the stock 78T spur. That gives a 7.8:1 final drive ratio. Confidence is high, and racers in this class...
Oct 13, 2026
TLR Mini-B
How do I set up my TLR Mini-B for speed?
For a faster, more stable TLR Mini-B, start by setting the front toe closer to 0° and reducing droop slightly; both can help it track straighter at speed. The Mini-B’s stock spur...
Oct 12, 2026
GFRP Assault 2024
GFRP Assault 2024 spins on entry and mid-corner—what to try?
If the rear steps out on both entry and through the middle, try one step softer rear springs first. That helps the rear tires stay planted as the car transfers weight, and is a...
Oct 11, 2026
Mugen Seiki MRX7
What are the pulley tooth counts on a Mugen Seiki MRX7?
The MRX7 references I have don’t specify the belt pulley tooth counts, so I can’t confirm those without guessing. They do list the two-speed gear defaults: 19T pinion with a 61T...
Oct 11, 2026
Team Associated RC10 B84/D
What oil setup for Team Associated RC10 B84/D on low-grip indoor clay?
Assuming you mean shock and differential oils, use the B84/D kit values as your baseline, then go lighter in small steps if the car lacks grip. There isn’t a documented B84/D oil...
Oct 11, 2026
XRAY X4 '22
What is the recommended droop for indoor carpet on an XRAY X4 '22?
For the XRAY X4 ’22, start with 9 mm front and rear shock stroke on carpet. That is the common carpet setting; on high-grip carpet, some setups use 8.5 mm instead. The X4 setup...
Oct 11, 2026
Carten T410FWD
How do I reduce chassis roll on a Carten T410FWD?
For less chassis roll on the Carten T410FWD, try stiffer anti-roll bars: the kit setup uses 1.4 front and rear, and the available stiffer option is 1.6. Change one end at a time...
Oct 11, 2026
Yokomo RS2.0
Yokomo RS2.0 asphalt setup with 21.5T motor?
Assuming a 21.5T Yokomo RS2.0 on medium-grip asphalt, start with about 5 mm front and 5.5 mm rear ride height, -1.5° front toe, and +3.5° rear toe. The 21.5T motor does not...
Oct 11, 2026
TLR 22S Dirt Late Model
What shock preload should I run on a TLR 22S Dirt Late Model for a high-bite oval?
There isn’t a numerical shock preload setting specified for the TLR 22S Dirt Late Model on high-bite oval. Use preload collars only to set ride height; a 1/10-scale Late Model...
Oct 11, 2026
Traxxas Slash 4X4
What is a high-grip dirt setup for a Traxxas Slash 4X4?
For a high-grip dirt track, start by lowering the Slash 4X4’s ride height and reducing traction roll. The available setup information doesn’t give a tested high-grip setup...
Oct 11, 2026
TLR 22S Dirt Late Model
What are good starting ride heights for a TLR 22S Dirt Late Model on dirt?
A good starting point for the 22S Dirt Late Model is 15 mm front and 21 mm rear. That’s a general 1/10-scale rubber-tire Late Model baseline, not a documented 22S kit ride-height...
Oct 10, 2026
TLR 22S Dirt Late Model
What ride heights should I use for a TLR 22S on low-grip dirt?
Start at 15 mm front and 21 mm rear. That is the 1/10 late model baseline listed for all track types; there isn’t a separate low-grip ride-height target for the TLR 22S. Measure...
Oct 10, 2026 Helped
Team Associated RC10 B84/D
What ride height should I use on carpet for Team Associated RC10 B84/D?
For the RC10 B84/D, start at 11 mm front and rear on medium-grip carpet. On high-grip carpet, 12 mm front and rear is a good starting point; those are the carpet ride heights used...
Oct 10, 20265 messages
Team Associated RC10 B64
What is the part number for Team Associated RC10 B64 front A-arms 4x4?
The RC10B64 front A-arms are Team Associated part #92025. The hard front arms are #92026.
Oct 10, 2026