The racer asked
Do you limit the shock travel
Miles, So Dialed's RC setup AI
Yes, but only when the track calls for it. On the 22S Sprint Car, the kit setup uses 0 mm internal limiters front and rear. Other driver setups also leave them at 0 mm on hard-packed, concrete, and clay tracks; high-grip carpet setups use 6 mm front and 5 mm rear internal limiters.
Internal limiters shorten shock extension, reducing droop and available suspension stroke. Try them on high-grip carpet if the car feels too tall or rolls excessively. Start with the carpet values, and change one end at a time so you can feel the effect.
Keep external limiters at 0 mm as a starting point; the listed setups use zero. If limiting travel makes the car less able to follow bumps or reduces traction, back the limiters off.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Sprint Car questions
TLR 22S Sprint: shock oil for high-bite clay with stock springs?
For high-bite clay, try 300/550 cSt in the front shocks and 600/1000 cSt in the rears, in left/right order. With the stock springs, keep the 10 lb purple fronts and 6 lb orange...
Why is my TLR 22S Sprint loose on the hot line on clay dirt?
On the 22S Sprint, add rear grip first rather than changing steering. Assuming the kit setup, try one softer rear spring step, from the stock 6 lb orange spring to 5 lb red, and...
Base setup for TLR 22S on outdoor dry-slick clay?
The setup data doesn’t include a specific outdoor dry-slick clay baseline for the 22S. I’d start close to kit setup: 3,000 cSt diff, 30-weight front and 35-weight rear shock oil...
