The racer asked
This kid comes with two rear gearbox height. It looks like what should I use?
Miles, So Dialed's RC setup AI
Start with 0 mm, the kit default. It’s the safer baseline if you’re not sure; the setting changes rear differential height.
Move to +2 mm for carpet or astroturf. B84/D racers commonly use +2 mm on those surfaces, while 0 mm is the common choice on medium-grip hard-packed dirt.
Change only this setting at first and compare a few laps. What surface and grip level do you race on?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B84/D questions
How should I set up my RC10 B84/D for long-pile astroturf indoors?
For long pile astroturf indoors, start from the high grip astroturf setup for the RC10 B84/D. It lowers the ride height and raises the axles, which keeps the car planted on the...
How do I get more grip on my RC10 B84/D at Tacoma RC Raceway?
Start with the tires: at a smooth, clean clay track, try a clay slick or ghost slick; if there’s dust on top, use a pin tire suited to dusty hardpack instead. The right tread and...
Are there more setup examples for the Team Associated RC10 B84/D?
Yes. There are other-driver setup references for the RC10 B84D across carpet, astroturf, hard-packed, and loose/loamy tracks. They’re setting examples rather than complete...
What spur gear size for Team Associated RC10 B84/D stock setup?
Use a 78-tooth spur gear for the RC10 B84/D’s basic stock setup. That is the kit setup default; the car also supports 72-, 75-, and 81-tooth spurs for gearing changes.
What oil setup for Team Associated RC10 B84/D on low-grip indoor clay?
Assuming you mean shock and differential oils, use the B84/D kit values as your baseline, then go lighter in small steps if the car lacks grip. There isn’t a documented B84/D oil...
What ride height should I use on carpet for Team Associated RC10 B84/D?
For the RC10 B84/D, start at 11 mm front and rear on medium-grip carpet. On high-grip carpet, 12 mm front and rear is a good starting point; those are the carpet ride heights used...
