Part numbers from Hong Nor's own parts list for the Hong Nor iX5B, written out so you can search them. The original document is at the end of this page.
Full parts list
| Part # | Description | Qty |
|---|---|---|
| A-34B | Stabilizer Ball End | 2 |
| A-41A | 6mm Ball | 6 |
| C-27 | Servo Fixing (Lay down) | 1set |
| E-37 | 6mm Ball & Socket | 6 |
| G-25 | 7mm Ball | 6 |
| G-26 | 5x35 Turnbuckle | 2 |
| J-03A | P-6 O-Ring | 2 |
| J-20 | Diff Bevel Gear Shim 13x16x0.2mm | 4 |
| J-33 | Steering Plate Hex Screws | 2 |
| J-47D | Shock Shaft Dust Covers | 4 |
| JS-06B | Bearing 4x8 Flange | 2 |
| JS-14B | 6x10 Ball Bearing | 4 |
| K-11A | Insert for Servo Saver | 1set |
| LS-28A | 3x20mm Turnbuckle | 2 |
| TM-48 | Stabilizer Ball End | 8 |
| X1-10H | Servo Saver Tube, Hard-Coated | 1 |
| X1-26-G | Alum. Wheel Hub.(Gold) | 2 |
| X1-27 | Knuckle Arm Bushing | 4 |
| X1-31 | Shock Ball End Post/ One-Piece/ Top | 4 |
| X3.6-07 | 4x67.6mm Arm Shaft | 2 |
| X3-01 | Spiral Bevel Gear 43t | 1 |
| X3-02 | Spiral Bevel Gear 13t | 1 |
| X3-03 | Diff. Gear 10Tx4, 20Tx2 | 1set |
| X3-06 | Drive Shaft Insert, 2.5 x12.8 Pin | 4 |
| X3-07 | CVD Wheel Axle | 2 |
| X3-31 | 7x8.5mm Ball & Socket | 4 |
| X3-32 | 7x12mm Ball & Socket | 4 |
| X3-34 | 2.5x11.8 Pins | 10 |
| X3-35 | 2.5 x12.8 Pins | 10 |
| X3-38 | Diff Gasket 31x20x0.3 | 3 |
| X3-40 | 4x10 Round Head Set Screw | 4 |
| X3-43 | Diff. Case (F&R) | 1 |
| X3-46 | Suspension Bracket lnserts | 1set |
| X3-49 | Body Post/Center Brace | 1set |
| X3-50 | Plastic Rod End | 1set |
| X3-52 | Front Bumper / Rear MudGuard | 1set |
| X3GT-40 | Cup Joint For Planet Gear | 2 |
| X3GT-71E | Fixing Pin | 2 |
| X5-09B | Carbon Steering Block Arm Set | 1set |
| X5-10 | Alum. Swaybar Pin | 2 |
| X5-15 | Front CVD Drive Shaft 92.5mm | 2 |
| X5-16 | Servo Saver Post | 2 |
| X5-17 | 5x50mm Turnbuckle | 2 |
| X5-18 | Steering King Pin | 4 |
| X5-19 | Anti-roll Bar Collet | 2 |
| X5-20 | Servo Saver Spring | 1 |
| X5-21 | Gear Case | 1set |
| X5-22 | Lower Arm Front | 1set |
| X5-23 | Lower Arm Rear | 1set |
| X5-24 | Receiver/ Battery Box | 1set |
| X5-25A | Rear Hub L, R | 1set |
| X5-25B | Carbon Rear Plates | 2 |
| X5-26 | Wing Mount | 1set |
| X5-27 | Diff. Cap Joint (Lightweight) | 2 |
| X5-29E | X5B Clear Body EP | 1 |
| X5-30 | Steering Servo Saver Alum. | 1 |
| X5-33 | 16mm Alum. Aeration Shock Cap | 2 |
| X5-34 | Center Drive Shaft. 94mm | 1 |
| X5-35 | Center Drive Shaft. 121mm | 1 |
| X5-36 | Seal Bleeder Cap | 4 |
| X5-37 | Servo Saver Dust Cover | 2 |
| X5-41 | Servo Saver Adjuster Oring | 1set |
| X5-42A | Rear CVD Drive Shaft 106mm | 2 |
| X5-43 | Camberlink Balljoint | 2 |
| X5-46 | Carbon Center Diff Top Plate | 1 |
| X5-48 | Battery Holder | 2 |
| X5-49 | Receiver/ ESC/ Servo Holder | 1set |
| X5-50 | Side Guard 2.R | 1set |
| X5-51 | CNC 7075-3mm Lightweight Chassis. EP | 1 |
| X5-52 | Topdeck Carbon | 1 |
| XT-22 | Plastic Shock Parts Set | 1 |
| XT-31 | Plastic Center Diff. Mount | 1set |
| X3S-04 | Diff. Cap Joint (Lightweight) | 2 |
| X3S-16 | Rear Upright 3.5mm | 2 |
| X3S-44C | 4x35mm Turnbuckle | 2 |
| X3S-44D | CNC Alum. Servo Saver Connecting Plate | 1 |
| X5-02 | CNC 7075 Front Shock Tower | 1 |
| X5-03 | CNC 7075 Rear Shock Tower | 1 |
| X5-04 | CNC 7075 Suspension Bracket, FR | 1 |
| X5-05 | CNC 7075 Suspension Bracket, FF | 1 |
| X5-06 | CNC 7075 Suspension Bracket, RF | 1 |
| X5-07 | CNC 7075 Suspension Bracket, RR | 1 |
| X5-08 | Alum.Angle Adjustable C-Hub Set | 1set |
| X5-09A | Steering Block Set | 1set |
| #155B | Body Clips | 4 |
| #267D | Bearing 8x16x5mm | 8 |
| #267E | Needle Roller 2.5x16.8 | 4 |
| #312-BK | Universal Servo Horn, Black | 1set |
| #315A | Shock Shafts (Front) | 2 |
| #316A | Shock Shafts (Rear) | 2 |
| #363 | Alum. Diff Cross Pin (Hard-Coated) | 6 |
| #387A-G | 16mm Front Shock Body | 2 |
| #387B-G | 16mm Rear Shock Body | 2 |
| #387D-BK | 16mm Shock Spring Adjuster, Black | 4 |
| #387F | 19x1.5mm O-Ring | 4 |
| #387G | Plastic Shock Spring Holder | 1set |
| 2.3 | Front Anti-roll Bar 2.3mm | 1 |
| 2.5 | Rear Anti-roll Bar 2.5mm | 1 |
| 2.0 | 3.6x8x2mm Alum. Washer | 2 |
| #387P | 16mm Shock Piston | 1set |
| #394-BK | 17mm Wheel Locking Nut, Black | 4 |
| #397-16 | 16T Pinion Gear 5mm, M1 | 1 |
| #403 | Velcro Battery Straps (Black), Short 20x200mm | 4 |
| #415B | Motor Mount B (Titanium color) | 1 |
| #452B | 1/8 Buggy Wing. Black | 1set |
| #457-M | Shock Spring (Yellow/ 65mm) 5.3lbs | 2 |
| #458-M | Shock Spring (Yellow/ 85mm) 3.8lbs | 2 |
| #462-S | Air Pressure Top (Orange) | 4 |
| #465 | 3.46 O-Ring | 8 |
