Every factory spare part for the Kyosho Inferno MP10T is listed below, straight from Kyosho’s official spare parts pages — including shared MP9/MP9e Evo-platform parts that also fit those chassis where noted. Each part number links to that part at AMain Hobbies where a live match was found; parts with no current match are listed as plain text. The full factory manual, with exploded parts views, is still available on this page via the Open Document button above.
Inferno MP10T — Factory Spare Parts
| Part # | Part |
|---|---|
| BRG001 | Shield Bearing (5x10x4/4pcs) |
| BRG005 | Shield Bearing (8x16x5/2pcs) |
| BRG022 | Shield Bearing (6x10x3/2pcs) |
| BRG031 | Shield Bearing (5x11x4/2pcs) |
| IF30-1 | Diff. Case Packing (5pcs) |
| IF35 | Steering Pin |
| IF110 | 2.6x17mm Pin |
| IF287 | Hard Upper Adjust Rod (Steel/Rear/2pcs) |
| IF346-04 | Steel Shock Bush (For Big Shock/4pcs) |
| IF346-05C | Shock End Set (for Big Shock/4set) |
| IF346-07 | Adjustment Collar (For Big Shock/4set) |
| IF347-145 | Shock Piston (1.4x5 Hole/2pcs/For Big Shock) |
| IF351 | Silicone Switch Boots (1pcs/MP777/ST-RR) |
| IF402 | Diff. Bevel Gear Set (MP9) |
| IF403B | Diff. Case Set (F&R/MP9) |
| IF404B | Center Diff. Case Set (MP9) |
| IF404-01 | Diff. Case Gaskets (36mm/5pcs/MP9) |
| IF405 | Center Diff. Mount (MP9) |
| IF408C | Bulkhead Set (F&R/MP9) |
| IF409 | Bumper (MP9) |
| IF410-46 | Spur Gear (46T/MP9) |
| IF411 | Diff. Bevel Shaft (2pcs/MP9) |
| IF412 | Diff. Shaft (2pcs/MP9) |
| IF413 | Center Diff. Shaft (2pcs/MP9) |
| IF414 | Brake Cam Set (MP9) |
| IF418 | Servo Saver Post (MP9) |
| IF420 | Knuckle Arm Collar (4pcs/MP9) |
| IF430 | Engine Mount (MP9) |
| IF432 | 3PC Flywheel (32mm/MP9) |
| IF435 | Servo Horn Set (MP9) |
| IF438 | King Pin (M4/4pcs/MP9) |
| IF443B | Center Diff. Plate (Gunmetal/MP9) |
| IF444-01 | Fuel Tank Bush Set (MP9) |
| IF454B | Linkage Set (MP9) |
| IF455 | Wing Washer (Gunmetal/2pcs/MP9) |
| IF459-2.3 | Front Sway Bar (2.3mm/1pc/MP9) |
| IF460-2.6 | Rear Sway Bar (2.6mm/1pc/MP9) |
| IF462H | 5.8mm Flanged Hard Ball (2pcs/MP9) |
| IF463H | 7.8mm Flanged Hard Ball (2pcs/IF56) |
| IF465H | 7.8mm Taper Hard Ball (2pcs/IF55) |
| IF466 | Center Diff. & Servo Mount Spacer Set (MP9) |
| IF467 | Long King Pin Set (MP9) |
| IF468 | Brake Rotor (30mm/MP9 TKI2) |
| IF469B | Air Cleaner Set (MP9 TKI3) |
| IF469-01 | Air Cleaner Sponge (2pcs/MP9) |
| IF470-03BK | Shock Adjust Dial (for Big Shock/2pcs/Black) |
| IF475 | Servo Saver Adjust Sponge (2pcs) |
| IF476 | 3PC Flywheel Nut (MP9) |
| IF478 | Battery Box Set (MP9 TKI3) |
| IF479B | Receiver Box Set (MP9 TKI3) |
| IF481B | Fuel Tank Stay Set (MP9 TKI3) |
| IF488 | Aluminum Knuckle Arm (L,R/Gunmetal/MP9 TKI4) |
| IF488-L | Aluminum Knuckle Arm (L/Gunmetal/MP9 TKI4) |
| IF488-R | Aluminum Knuckle Arm (R/Gunmetal/MP9 TKI4) |
| IF491BK | Wing (Black/MP9 TKI4) |
| IF492 | 6.5x26mm Shaft (MP9 TKI4/4pcs) |
| IF517 | Steering Plate (Gunmetal/MP9e Evo) |
| IF602 | Radio Plate (Gunmetal/MP10) |
| IF603 | Front Upper Plate (Gunmetal/MP10) |
| IF606 | Engine Mount Plate Set (Gunmetal/MP10) |
| IF607 | Front Lower Sus. Holder (F/Gunmetal/MP10) |
| IF608 | Front Lower Sus. Holder (R/Gunmetal/MP10) |
| IF609 | Rear Lower Sus. Holder (F/Gunmetal/MP10) |
| IF610 | Rear Lower Sus. Holder (R/Gunmetal/MP10) |
| IF613H | Hard Rear Hub Carrier (MP10) |
| IF613-01 | Rear Hub Carrier Bush Set (MP10) |
| IF614 | Side Guard (MP10) |
| IF615 | One Piece Wing Stay (MP10) |
| IF616KY | Color Sus. Bush Set (F-Yellow/MP10) |
| IF618 | Chassis Brace Set (MP10) |
| IF619 | Body Mount Set (MP10) |
| IF620 | Sway Bar Ball End (MP10) |
| IF623 | Universal Center Shaft F (82mm/MP10) |
| IF624-65 | HD Sus. Shaft (4.5x65mm/2pcs/MP9) |
| IF624-69 | HD Sus. Shaft (4.5x69mm/2pcs/MP9) |
| IFW35 | Bell Guide Washer (Short) |
| IFW53 | 3PC Clutch Spring (1.00) |
| IFW140-05 | O-ring Set |
| IFW140-06 | O-ring (1.9x3.4) |
| IFW143B | Fly Wheel Tapered Collet Set |
| IFW154 | Shock Boots |
| IFW324-01 | Disk Plate Bolt (16.5mm/for AC Brake/4pcs) |
| IFW328GM | Wheel Hub (L/Gunmetal/ST-RR Evo/4set) |
| IFW332-01 | Bush (for Aluminum Knuckle Arm/4pcs) |
| IFW339 | 3PC HD Aluminum Clutch Shoe |
| IFW401B | SP Aluminum Radio Post (Gunmetal/4pcs/MP9) |
| IFW415 | Hard Rear Lower Sus. Shaft Screw (3.5x49mm/2pcs/MP9) |
| IFW416 | 6.8mm Hard Ball (H=8.7/2pcs/MP9) |
| IFW417 | 6.8mm Hard Ball (H=10.2/2pcs/MP9) |
| IFW458 | Hard Front Lower Sus. Shaft Screw (3x42.8mm/2pcs/MP9) |
| IFW459B | Servo Saver Assy (Hard Spring Type/MP9/MP10) |
| IFW468B | Front Hub Carrier Set (L,R/17.5deg/MP9) |
| IFW469 | Aeration Cap Set (Threaded Big Shock/MP9) |
| IFW469-01 | Shock Cap Seals Set (4pcs) |
| IFW470 | HD Coating Shock Set (M/55/MP9) |
| IFW472GM | Wheel Nut (Gunmetal/4pcs/for Serration) |
| IFW473 | Brake Pad (MP9) |
| IS053B | 6.8mm Ball End (Offset Type/8pcs) |
| IS201 | Main Chassis (MP10T) |
| IS202 | Upper Arm Set (MP10T) |
| IS203 | Rear Chassis Brace (MP10T) |
| IS204 | Front Lower Sus. Arm (L,R/MP10T) |
| IS205 | Rear Lower Sus. Arm (L,R/MP10T) |
| IS206 | Body Mount Set (MP10T) |
| IS207 | Hard Front Shock Stay (MP10T) |
| IS208 | Hard Rear Shock Stay (MP10T) |
| IS209 | Fuel Tank (150cc/MP10T) |
| IS210-46 | Ring Gear (46T/MP10T) |
| IS211-10 | Drive Bevel Gear (10T/MP10T) |
| IS212 | Rear Center Universal Shaft (L=177/1pc/MP10T) |
| IS213 | Universal Swing Shaft (L=132.5/2pcs/MP10T) |
| IS214 | Adjustable Rod (4x84mm/2pcs) |
| IS215 | HD Coating Shock Set (L=58/MP10T) |
| IS215-01 | HD Coating Shock Case (L=58/2pcs) |
| ISS001-915 | Big Shock Spring (Light Purple/9-1.5/L=88) |
| ISS002-1015 | Big Shock Spring (Light Purple/10-1.5/L=94) |
| ISB104 | MP10T Non-Decoration Body Set |
| ISD102 | MP10T Decal |
| LA43 | 5.8mm Ball End (12pcs) |
| ORG06 | Silicone O-Ring (P6/Orange/15pcs) |
| UM729 | Magic Tape (20x100/1pc) |
| W0201H | 5.8mm Hard Ball (5pcs) |
| W0204 | 6.8mm Hard Ball (H=4.8/4pcs) |
| 1-S34025H | Flat Head Screw (Hex/M4x25/5pcs) |
| 1-S54010 | Set Screw (M4x10/6pcs) |
| 1-W300910 | Washer (M3x9x1.0/10pcs) |
| 1-W451005 | Washer (M4.5x10x0.5/10pcs) |
| 1708 | Color Antenna (Black/4pcs) |
| 1876 | Fuel Tank Filter |
| 92213 | Fuel Tube (2.4x6x1000mm) |
| 92511 | Muffler Stay |
| 92638 | Snap Pin (10pcs) |
| 92653H | 5.8mm Hard Ball Joint (3.0mm Hole/4pcs) |
| 96641 | 3x5mm Shim Set |
| 96772 | 13x16x0.15mm Shim SUS (10pcs) |
| 96773 | 8x12x0.2mm Shim (5pcs) |
| 96774 | 5x20x0.2mm Shim (5pcs) |
| 97002 | Body Pin (1.6mm/10pcs/FM29) |
| 97008-36H | Hard Adjust Rod (3x36mm/2pcs) |
| 97011-128B | Pin (2.5x12.8mm/6pcs) |
| 97035LW-13 | One Piece Clutch Bell 13T (Light Weight) |
| 97049GM | Linkage Stopper (2mm/Gunmetal/5pcs) |
| 97051 | 6.8mm Ball End (HG/8pcs) |
Springs for this platform are covered in depth on the Kyosho 1/8 shock spring chart. Option parts (wings, bodies, aluminum upgrades) are listed on the PDF manual’s Optional Parts pages.
Part numbers from Kyosho’s official MP10T instruction manual. Some links above are affiliate links that support the site.
