Parts listSource: Traxxas

Traxxas Rustler 2WD & VXL Parts List

Traxxas

Rustler 2WD/VXL

Setup sheets →

Shock oil chart Shop Rustler 2WD/VXL parts & upgrades at AMain →Ad

Popular upgrades for the Rustler 2WD

The upgrades Rustler 2WD owners actually buy, none of them made by Traxxas. RPM makes the nylon suspension and bumpers that survive what the stock parts don’t, Hot Racing the metal drivetrain pieces, Pro-Line the bodies and tyres. Most fit the Slash, Bandit and Stampede as well — each row says which. Traxxas’ own spares are in the full list below.

Part	Why you buy it
RPM Front A-Arms (2)	The single most-bought Rustler upgrade. Also fits Stampede and Slash
RPM Rear A-Arms (2)	Rear half of the same swap. Also fits Stampede
RPM 30° Caster Block Set (2)	More caster and far more durable than stock
RPM Front Bearing Carrier Set (2)	Fits Slash, Bandit, Rustler and Stampede
RPM Rear Bearing Carriers (2)	Same four cars, rear end
RPM Front Shock Tower	Flexes instead of snapping. Fits Bandit, Slash, Rustler, Stampede
RPM Rear Shock Tower	The rear half of the same fix
RPM Wide Front Bumper	Wider than stock, so the arms stop taking head-on hits
RPM Camber Links (4)	Adjustable camber, and they survive what the stock links don’t
RPM Gear Cover	Keeps dirt out of the spur. Fits the whole Traxxas 2WD chassis family
Hot Racing 32P Steel Pinion & Spur Set (18T/58T)	Steel instead of plastic spur. Fits Slash, Rustler, Stampede and Bandit
Hot Racing Rear Lightweight CV Drive Shafts (2)	CV shafts in place of the stock dogbones

See all 269 factory Rustler 2WD parts →

More option parts for this car

Shock oil chart

Every part shown in the factory exploded-view diagrams for the Traxxas Rustler 2WD and Rustler VXL is listed below, grouped by the assembly it belongs to, so the same part can appear under more than one heading. Each part number links to that part at AMain Hobbies where a live match was found; parts with no current match are listed as plain text. The full exploded-view diagrams for each assembly are on this site as well.

Rustler 2WD & VXL — Parts by Assembly

Front Assembly

Part #	Part
3675	12mm hex 2.2 front stadium truck wheel 2 dyeable white
3673	12mm hex 2.2 front stadium truck wheel 2 satin chrome
3737A	39mm turnbuckle camber link blue
3737	39mm turnbuckle camber link red
2537	3mm threaded rods: 1 each of 20mm,25mm&44mm
2593	3x14mm button head hex screw (6)
3139	62mm turnbuckle (2)
3771A	Alias front tires w/ allstar wheels 2 black chrome standard
3741A	Aluminum turnbuckle camber link set blue (4)
3741X	Aluminum turnbuckle camber link set red (4)
3776A	Anaconda tires w/ allstar front wheels 2 black chrome standard
5576R	Anaconda tires w/ allstar rear wheels 2 jato chrome standard
3637	Axles (front) (2)
5116	Ball bearings, blue rubber sealed (5x11x4mm) (2)
5114	Ball bearings, blue rubber shield (5x8x2.5mm) (2)
2660	Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
1834	Body Clips (12) (standard size)
3934	Body clips, heavy duty (12)
1914R	Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware
3765A	Body, Ultra Shock (long) (grey) (2)
3766A	Body, Ultra Shock (XXL) (grey) (2)
2530	Bulkhead (front) (black)
2530A	Bulkhead (front) (grey)
2735	Bumper (front)
2735P	Bumper (front) (pink)
2545	Bushings (plastic) (5x8x2.5mm) (4)
1675	Bushings, self-lubricating (5x11x4mm) (14)
3641A	Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
3632	Caster blocks (l&r) (30-degree)
3632A	Caster blocks, 30-degree, blue-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632G	Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632P	Caster blocks, 30-degree, pink-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
3632X	Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
1633	E-clips/ C-rings
4780R	Front protrax tires with foam inserts (2)
1914	Front rear body mount set w/ hardware
3631L	HD cold weather front suspension arm set white
3728	Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)
3728A	Lower chassis (gray) (166mm long battery compartment) (fits both flat and hump style battery packs)
4780	Multi rib front 2.2 truck tire
2745	Nuts, 3mm nylon locking (12)
1747P	Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
3647	Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747R	Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G	Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1985	PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
3757R	Rear shock springs red (2)
5525	Rod ends (12)/ hollow balls (12)
1942	Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)
2742	Rod ends, long (6)/ hollow ball connectors (6)
5347	Rod ends, Revo® (large) with hollow balls (12)
2742X	Rod ends, short (6)/ hollow balls (6)
3739	Screw pin set (Rustler®/ Bandit/ Stampede®)
3288	Screw, 3x15mm washerhead self-tapping (6)
2577	Screws, 3x10mm button-head machine (hex drive) (6)
4859	Screws, 3x10mm flat-head machine (hex drive) (4)
2675	Screws, 3x10mm roundhead self-tapping (6)
2578	Screws, 3x12mm button-head machine (hex drive) (6)
2552	Screws, 3x12mm countersunk machine (6) (hex drive)
3186	Screws, 3x12mm washerhead machine (6)
2579	Screws, 3x15mm button-head machine (hex drive) (6)
2649	Screws, 3x15mm countersunk self-tapping (6)
3646	Screws, 3x15mm flat-head machine (hex drive) (6)
2563	Screws, 3x15mm roundhead machine (6)
3187	Screws, 3x15mm washerhead machine (6)
2580	Screws, 3x20mm button-head machine (hex drive) (6)
3932	Screws, 3x6mm flat-head machine (hex drive) (6)
2576	Screws, 3x8mm button-head machine (hex drive) (6)
3290	Screws, 3x8mm washerhead self-tapping (6)
2548	Screws, 4x12mm countersunk machine (100-degree) (6)
2542	Screws, 4x12mm countersunk machine (hex drive) (6)
3167	Screws, 4x15mm countersunk machine (6)
2546	Screws, 4x15mm countersunk machine (hex drive) (6)
3744	Servo saver w/ adapters
2075	Servo, digital high-torque (ball bearing), waterproof
2056	Servo, high-torque, waterproof (blue case)
5529	Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
3767	Shock caps (2)/ shock bottoms (2)
8361	Shock caps (black) (4) (assembled with hollow balls)
2362	Shock rebuild kit (for 2 shocks)
1664T	Shock shafts, hardened steel, titanium nitride coated (long) (2)
2656T	Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)
1664	Shock shafts, steel, chrome finish (long) (2)
2656	Shock shafts, steel, chrome finish (xx-long) (2)
3639	Shock tower (front)
3742	Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)
3642	Shoulder screws, Ultra shocks (3x12) (6)
1765	Silicone diaphragms (4)
1666	Silicone shock oil 1 2oz
3769	Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
3768	Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
2458P	Springs (front) (pink) (2)
2458A	Springs (front) (white) (2)
3757T	Springs, rear (blue) (2)
3757A	Springs, rear (green) (2)
3757P	Springs, rear (pink) (2)
3757X	Springs, white (rear) (2)
3743	Steering bellcranks (l&r)/ draglink
3743A	Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743G	Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743P	Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
3743X	Steering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
6845X	Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
3736	Steering blocks, left & right (2) (requires 5x11x4mm bearings)
3636A	Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3636G	Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)
3636P	Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3636X	Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)
2754	Stub axle pins (4)
3631	Suspension arms (front) (2)
3631X	Suspension arms, black, front, heavy duty (2)
3631A	Suspension arms, blue, front, heavy duty (2)
3631G	Suspension arms, green, front, heavy duty (2)
3631T	Suspension arms, orange, front, heavy duty (2)
3631R	Suspension arms, red, front, heavy duty (2)
3740	Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks)
2640	Suspension pins, 44mm (2) w/ E-clips (Use with tie bar to strengthen front bulkhead)
3640	Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler®, Stampede®, Bandit)
2532	Tie bar, fiberglass (requires suspension pins, part# 2640)
3139A	Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139X	Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3644	Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
3745	Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)
3760A	Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2)
3729	Upper chassis (black)
3729A	Upper chassis (gray)
2746	Washers, 3x6mm metal (12)
3654	Wheel hubs, hex (tall offset,Rustler®/Stampede® front) (2)/ axle pins (2.5x10mm) (2)
5576A	Wheels, All-Star 2.8" (black chrome) (nitro rear / electric front) (2)
5576	Wheels, All-Star 2.8" (chrome) (nitro rear / electric front) (2)

Rear Assembly

Part #	Part
3674	12mm hex 2.2 rear stadium truck wheel 2 dyeable white
3672	12mm hex 2.2 rear stadium truck wheel 2 satin chrome
2593	3x14mm button head hex screw (6)
3738A	49mm camber link turnbuckle blue
3738	49mm camber link turnbuckle red
3770A	Alias rear tires w/ allstar wheels 2 black chrome standard
3772A	Allstar 2.8 rear wheels 2 black chrome
3741A	Aluminum turnbuckle camber link set blue (4)
3741X	Aluminum turnbuckle camber link set red (4)
3773A	Anaconda rear tires w/ allstar wheels 2 black chrome standard
5116	Ball bearings, blue rubber sealed (5x11x4mm) (2)
2662	Big-bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
1834	Body Clips (12) (standard size)
3934	Body clips, heavy duty (12)
1675	Bushings, self-lubricating (5x11x4mm) (14)
3641A	Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
1953	Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)
1951	Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)
1951R	Heavy duty steel CV rear driveshaft (2)
3728	Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)
3728A	Lower chassis (gray) (166mm long battery compartment) (fits both flat and hump style battery packs)
1747P	Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
3647	Nuts, 4mm flanged nylon locking (steel, serrated) (8)
1747R	Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G	Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1985	PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
4790	Rear spike 2.2 truck tire
5525	Rod ends (12)/ hollow balls (12)
3739	Screw pin set (Rustler®/ Bandit/ Stampede®)
2578	Screws, 3x12mm button-head machine (hex drive) (6)
2552	Screws, 3x12mm countersunk machine (6) (hex drive)
2648	Screws, 3x12mm countersunk self-tapping (6)
2676	Screws, 3x12mm roundhead self-tapping (6)
3186	Screws, 3x12mm washerhead machine (6)
2579	Screws, 3x15mm button-head machine (hex drive) (6)
2548	Screws, 4x12mm countersunk machine (100-degree) (6)
2542	Screws, 4x12mm countersunk machine (hex drive) (6)
5529	Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
8361	Shock caps (black) (4) (assembled with hollow balls)
3638	Shock tower (rear)
3642	Shoulder screws, Ultra shocks (3x12) (6)
3752	Stub axle carriers (2) (requires 5x11x4mm bearings)
3652A	Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4)
3652G	Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings (4)
3652P	Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
3652X	Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)
2754	Stub axle pins (4)
2753X	Stub axles, rear (2)
3655X	Suspension arms
3640	Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler®, Stampede®, Bandit)
6774R	Talon ext 2.8 premounted tires w/ rtx wheels chrome (2)
6774G	Talon ext 2.8 premounted tires w/ rtx wheels green (2)
6774	Talon ext 2.8 premounted tires w/ rxt wheels 2 black
6774A	Talon ext 2.8 premounted tires w/ rxt wheels 2 orange
6774X	Talon ext 2.8 premounted tires w/ rxt wheels black chrome (2)
3643	Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
3762A	Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
2746	Washers, 3x6mm metal (12)
1654	Wheel hubs, hex (2)/ stub axle pins (2)
1654X	Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)

Chassis

Part #	Part
1926	Antenna caps, vinyl (2)/ antenna spool
1726	Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
3725X	Battery expansion kit rustler bandit stampede
3727	Battery hold-down plate (black)/ metal posts (2)/body clips (2)
3727A	Battery hold-down plate (grey) / metal posts (2) / body clips (2)
1834	Body Clips (12) (standard size)
3628	Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2)
3728	Lower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)
3728A	Lower chassis (gray) (166mm long battery compartment) (fits both flat and hump style battery packs)
3725R	Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit or Rustler®)
6519	Receiver, micro, TQ 2.4GHz (3-channel)
6533	Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)
3965	Screws, 2.5x8mm cap-head machine (6)
2587	Screws, 3x10mm caphead machine (6) (no washer)
2578	Screws, 3x12mm button-head machine (hex drive) (6)
2676	Screws, 3x12mm roundhead self-tapping (6)
3286	Screws, 3x12mm washerhead self-tapping (6)
2586	Screws, 3x15mm cap-head machine (hex drive) (6)
2576	Screws, 3x8mm button-head machine (hex drive) (6)
3290	Screws, 3x8mm washerhead self-tapping (6)
3629	Seal kit, receiver box (includes o-ring, seals, and silicone grease)
1548	Set screw set (12)
3638	Shock tower (rear)
3355R	VXL-3s Waterproof Electronic Speed Control (brushless) (fwd/rev/brake)
3018R	XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)

Transmission

Part #	Part
2572	3x30mm roundhead machine screws (6)
5116	Ball bearings, blue rubber sealed (5x11x4mm) (2)
3792	Cover, gear/ rubber gear cover plug/ 3x6 RM (2) (Stampede/Rustler/Bandit)
4628R	Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
4628X	Differential output yokes, hardened steel (w/ U-joints) (2)
2380	Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®)
4628	Drive yokes with screws (2)
3790	Gear adapter, fixed
2416	Gear, 16-T pinion (48-pitch) / set screw
2419	Gear, 19-T pinion (48-pitch) / set screw
4728	Gear, 28-T pinion (48-pitch) (fits 3mm shaft)/ set screw
4725	Gear, pinion (25-tooth) (48-pitch) / set screw
3691	Gearbox halves (L&R) (black) w/ idler gear shaft
3691A	Gearbox halves (L&R) (grey) w/ idler gear shaft
1953	Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)
1951	Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)
1951R	Heavy duty steel CV rear driveshaft (2)
3696	Idler gear, steel (30-tooth)
3793	Input shaft (slipper shaft) / spring pin
2381X	Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®)
3354R	Motor cover, endbell (Velineon® 3500)
3785	Motor, Titan® 12T (12-Turn, 550 size)
3351R	Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)
1747	Nuts, 4mm nylon locking (10)
2382	Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel
2388X	Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)
1985	PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
5552X	Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
3352R	Rebuild kit, Velineon® 3500 (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing)
2578	Screws, 3x12mm button-head machine (hex drive) (6)
2580	Screws, 3x20mm button-head machine (hex drive) (6)
2566	Screws, 3x20mm roundhead machine (6)
2591	Screws, 3x23mm button-head machine (hex drive) (6)
2567	Screws, 3x23mm roundhead machine (6)
2582	Screws, 3x30mm button-head machine (hex drive) (6)
2592	Screws, 3x40mm button-head machine (hex drive) (6)
2575	Screws, 3x6mm button-head machine (hex drive) (6)
2554	Screws, 3x6mm caphead machine (hex drive) (6)
2558	Screws, 3x6mm roundhead machine (6)
3931	Screws, 3x8mm flat-head machine (hex drive) (6)
3185X	Screws, 3x8mm washerhead machine (large head for motor mount) (6)
2743	Set (grub) screws, 3mm hardened (12)
5556	Slipper pressure plate & hub (aluminum alloy)
4676	Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch)
4683	Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)
4686	Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)
4690	Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)
2754	Stub axle pins (4)
3195	Top drive gear, steel (22-tooth)
3695	Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)
3677X	Wheelie bar mount (1) / hardware (blue)
3677A	Wheelie bar mount (1) / hardware (green)
3677P	Wheelie bar mount (1) / hardware (pink)
3677	Wheelie bar mount (1)/ hardware (Stampede®, Rustler®, Bandit series)

Need different gearing for the pinion/spur combo above? Use the gear ratio calculator to dial in your final drive ratio.

Part numbers compiled from Traxxas’ official Rustler exploded-view diagrams (2WD and VXL, front, rear, chassis and transmission assemblies). Some links above are affiliate links that support the site.

Traxxas Rustler 2WD & VXL Parts List

Popular upgrades for the Rustler 2WD

Rustler 2WD & VXL — Parts by Assembly

Setup App & Race Log

Learn more about...