Parts listSource: XRAY

XRAY X4 '25 Parts List

XRAY

X4 '25

Setup sheets →

Spring chart Shock oil chart X4 '25 parts & upgrades at AMain →Ad

Commonly replaced parts

The arms, uprights, driveline and shock parts that go first on a race car, with the full list below.

Part #	Description
305241	DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5MM (4)
305135	COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS - V2 (2)
308329	XLP2 ALU SHOCK BODY (2)
308084	XLP2 SILICONE HYPER RESISTANT SHOCK ABSORBER MEMBRANE (4)
302663	COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8)
302612	ALU ADJ. TURNBUCKLE M3 L/R 39MM - SWISS 7075 T6 (2)
304990	DIFF GASKET (4)
301203	IMPACT ABSORBING FRONT BUMPER

More option parts for this car

Parts & upgrades at AMainAd Spring chart Shock oil chart

Every part XRAY lists for the XRAY X4 '25, from XRAY's own parts list, including the spares, the option parts and the hardware. Part numbers link to AMain Hobbies where the part is still sold; parts with no current match are listed as plain text.

Full parts list

Car parts (323)

Part #	Description
293080	LEAD WEIGHTS 4x5g & 4x10g WITH 3M GLUE
293084	PRECISION BALANCING CHASSIS WEIGHT 10g (4)
293311	GRAPHITE REAR WING SIDE PLATE 0.5MM - 1/10 ELECTRIC (2)
293401	ALU CLAMP SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - OFFSET - 23T
293402	ALU CLAMP SERVO HORN - HITEC - OFFSET- 24T
293403	ALU CLAMP SERVO HORN - FUTABA - OFFSET - 25T
293404	ALU CLAMP SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T
293405	ALU CLAMP SERVO HORN - HITEC - 2-HOLE M3 - 24T
293406	ALU CLAMP SERVO HORN - FUTABA, SAVÖX - 2-HOLE M3 - 25T
293407	ALU CLAMP SERVO HORN - KO PROPO, SANWA - 3-HOLE M3 - 23T
293408	ALU CLAMP SERVO HORN - HITEC - 3-HOLE M3 - 24T
293409	ALU CLAMP SERVO HORN - FUTABA, SAVÖX - 3-HOLE M3 - 25T
293411	ALU CLAMP SERVO HORN - KO PROPO, SANWA - OFFSET - 2-HOLE - M3 - 23T
293412	ALU CLAMP SERVO HORN - HITEC - OFFSET - 2-HOLE - M3 - 24T
293413	ALU CLAMP SERVO HORN - FUTABA, SAVÖX - OFFSET - 2-HOLE - M3 - 25T
293414	ALU ADJUSTABLE CLAMP STEERING SERVO HORN - KO, SANWA - 23T
293416	ALU ADJUSTABLE CLAMP STEERING SERVO HORN - FUTABA, SAVÖX - 25T
293491	ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - OFFSET - 23T
293492	ALU SERVO HORN - HITEC - OFFSET- 24T
293493	ALU SERVO HORN - FUTABA - OFFSET - 25T - V2
293497	ALU SERVO HORN - KO PROPO, SANWA - 2-HOLE M3 - 23T
293498	ALU SERVO HORN - HITEC - 2-HOLE M3 - 24T
293499	ALU SERVO HORN - FUTABA, SAVÖX - 2-HOLE M3 - 25T
293501	ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T
293502	ALU SERVO HORN - HITEC - 24T
293503	ALU SERVO HORN - FUTABA - 25T - V2
296509	ALU COUNTERSUNK SERVO SHIM (10)
296509-K	ALU COUNTERSUNK SERVO SHIM - BLACK (10)
296509-O	ALU COUNTERSUNK SERVO SHIM - ORANGE (10)
296510	ALU COUNTERSUNK SHIM (10)
296510-B	ALU COUNTERSUNK SHIM - BLUE (10)
296510-K	ALU COUNTERSUNK SHIM - BLACK (10)
296510-O	ALU COUNTERSUNK SHIM - ORANGE (10)
296510-V	ALU COUNTERSUNK SHIM - VIOLET (10)
296530-B	ALU NUT M3 - BLUE (10)
296530-K	ALU NUT M3 - BLACK (10)
296530-O	ALU NUT M3 - ORANGE (10)
301018	X4‘24 GRAPHITE CHASSIS 2.2MM
301019	X4‘24 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6
301020	X4‘24 ALU FLEX CHASSIS 1.5MM - SWISS 7075 T6
301070	X4 GRAPHITE UPPER DECK 2.0MM
301071	X4 GRAPHITE UPPER DECK 1.6MM
301072	X4 GRAPHITE UPPER DECK - SPLIT FRONT - 2.0MM
301073	X4 GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM
301077	X4‘23 GRAPHITE UPPER DECK - SPLIT FRONT OPEN - 2.0MM
301078	X4‘23 GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM
301078-K	X4 GLASS FIBER UPPER DECK - SPLIT REAR
301078-L	X4‘23 GRAPHITE UPPER DECK - SPLIT REAR - 1.6MM
301079	X4‘23 GRAPHITE UPPER DECK - SPLIT FRONT WAVE - 2.0MM
301079-K	X4 GLASS FIBER UPPER DECK - SPLIT FRONT WAVE
301079-L	X4‘23 GRAPHITE UPPER DECK - SPLIT FRONT WAVE - 1.6MM
301159	ALU COUNTERSUNK SHIM (4)
301159-O	ALU COUNTERSUNK SHIM - ORANGE (4)
301203	IMPACT ABSORBING FRONT BUMPER
301204	COMPOSITE BUMPER FOR ADJUSTABLE BODY MOUNTS
301238	X4 RUBBER BUMPER 3D LOW PROFILE
301250	COMPOSITE ONE-PIECE LOW PROFILE UPPER HOLDER FOR BUMPER
301322	FRONT BODY MOUNT SET 6MM
301322-H	HARD COMPOSITE HORIZONTAL REAR BODY MOUNT POST - SET
301323	FRONT BODY MOUNT SET +1MM HEIGHT
301324	FRONT BODY MOUNT SET +2MM HEIGHT
301325	T4 COMPOSITE BRACE FOR BUMPER - LOW (2)
301336	COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET
301337	COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +1MM HEIGHT
301338	COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +2MM HEIGHT
301349	X4 HORIZONTAL BODY POST MOUNTING GAUGE
301351-K	ALU ADJUSTABLE BODY POST STOP - BLACK (2)
301351-O	ALU ADJUSTABLE BODY POST STOP - ORANGE (2)
301352-O	ALU ADJUSTABLE BODY POST STOP NUT (2)
301383	X4 GRAPHITE BODY POST & BODY POST HOLDER - 1PC - 4.0MM
301576	X4 ALU UPPER CLAMP - INNER SHOCK POSITION - SWISS 7075 T6 (L+R)
301578	X4 ALU UPPER CLAMP -1MM - INNER SHOCK POSITION - SWISS 7075 T6 (L+R)
301973	X4 ALU SHOCK HOLDER FRONT FIXED - LOWER - SWISS 7075 T6 (2)
302062	T4 COMPOSITE ADJUSTMENT BALL-BEARING HUB (4)
302063-K	T4 ALU ADJUSTMENT BALL-BEARING HUB - BLACK (2)
302064-K	ALU ADJUSTMENT BALL-BEARING HUB +1MM - BLACK (2)
302121	X4 FRONT ROLL-CENTER SPACER (2)
302122	X4 REAR ROLL-CENTER SPACER (2)
302134-C	X4 COMPOSITE UPPER ARM - INNER SHOCK POSITION - FR/RL
302134-M	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - MEDIUM - FR/RL
302134-S	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - SOFT - FR/RL
302134-XS	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - EXTRA SOFT - FR/RL
302144-C	X4 COMPOSITE UPPER ARM - INNER SHOCK POSITION - FL/RR
302144-M	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - MEDIUM - FL/RR
302144-S	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - SOFT - FL/RR
302144-XS	X4 CFF™ UPPER ARM - INNER SHOCK POSITION - EXTRA SOFT - FL/RR
302182-G	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT
302182-H	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - HARD - RIGHT
302182-M	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - MEDIUM - RIGHT
302183-G	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT
302183-H	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - HARD - LEFT
302183-M	X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - MEDIUM - LEFT
302240-G	X4 COMPOSITE HUB - GRAPHITE
302240-H	X4 COMPOSITE HUB - HARD
302240-M	X4 COMPOSITE HUB - MEDIUM
302241	X4 ALU HUB - SWISS 7075 T6
302310	X4 ALU CASTER BUSHING FRONT 3° / REAR 0.5°/5.5° - 1 DOT (4)
302311	X4 ALU CASTER BUSHING FRONT 4° / REAR 1.5°/4.5° - 2 DOTS (4)
302312	X4 ALU CASTER BUSHING FRONT 5° / REAR 2.5°/3.5° - 3 DOTS (4)
302386	X4 ALU FRONT STEERING PLATE - INNER SHOCK POSITION - SWISS 7075 T6 (L+R)
302387	X4 ALU REAR ARS PLATE - INNER SHOCK POSITION - SWISS 7075 T6 (L+R)
302390	X4 COMPOSITE CASTER GAUGE (2)
302433	ANTI-ROLL BAR STEEL BALL END 3.8MM WITH 4MM THREAD (2)
302517-K	X4 ALU DUAL STEERING ARM - BLACK + BALL-BEARINGS (2)
302539	X4 ALU STEERING POST FOR DUAL SERVO SAVER (2)
302544	ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM (2)
302544-O	ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM - ORANGE (2)
302552	X4 ALU STEERING PLATE FOR DUAL STEERING
302553	X4 ALU STEERING PLATE WITH 7.5MM SPACING
302571	X4 GRAPHITE STEERING PLATE SET
302590	ALU DUAL STEERING ARM SCREW M3x7 - SWISS 7075 T6 (2)
302612	ALU ADJ. TURNBUCKLE M3 L/R 39MM - SWISS 7075 T6 (2)
302612-O	ALU ADJ. TURNBUCKLE M3 L/R 39MM - ORANGE - SWISS 7075 T6 (2)
302640-T	X4 ADJUSTABLE CAMBER SCREW 14MM M4 L/R - TITANIUM (2)
302663	COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8)
302664	COMPOSITE BALL JOINT 4.9MM UNIDIRECTIONAL - OPEN (4)
302665	COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4)
302666	X4 COMPOSITE BALL JOINT 4.9MM F+R - OPEN (2+2)
302670	X4 COMPOSITE UPPER ARM LINKS 4.9MM (1+1+1+1)
302776	X4‘24 ALU LOWER BULKHEAD - FRONT RIGHT - 7075 T6
302777	X4‘24 ALU LOWER BULKHEAD - FRONT LEFT - 7075 T6
302778	X4‘24 ALU LOWER BULKHEAD - REAR RIGHT - 7075 T6
302779	X4‘24 ALU LOWER BULKHEAD - REAR LEFT - 7075 T6
302831	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - FRONT 1.1MM
302832	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - FRONT 1.2MM
302833	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - FRONT 1.3MM
302834	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - FRONT 1.4MM
302975	X4 ALU SHOCK HOLDER REAR FIXED - LOWER - SWISS 7075 T6 (2)
302976	X4 ALU SHOCK HOLDER REAR ACTIVE - LOWER - SWISS 7075 T6 (2)
303075	BELT TENSIONER STEEL BUSHING (2)
303118-K	ALU SHIM 3x9x1.0MM - BLACK (10)
303119-K	ALU SHIM 3x9x2.0MM - BLACK (10)
303120	SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
303121	SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM)
303121-K	ALU SHIM 3x6x0.5MM - BLACK (10)
303121-O	ALU SHIM 3x6x0.5MM - ORANGE (10)
303122	ALU SHIM 3x6x1.0MM (10)
303122-K	ALU SHIM 3x6x1.0MM - BLACK (10)
303122-O	ALU SHIM 3x6x1.0MM - ORANGE (10)
303123	ALU SHIM 3x6x2.0MM (10)
303123-K	ALU SHIM 3x6x2.0MM - BLACK (10)
303123-O	ALU SHIM 3x6x2.0MM - ORANGE (10)
303125	ALU SHIM 3x6x3.0MM (10)
303125-K	ALU SHIM 3x6x3.0MM - BLACK (10)
303125-O	ALU SHIM 3x6x3.0MM - ORANGE (10)
303126	ALU SHIM 3x6x5.0MM (10)
303126-K	ALU SHIM 3x6x5.0MM - BLACK (10)
303127	ALU SHIM 3x6x4.0MM (10)
303127-K	ALU SHIM 3x6x4.0MM - BLACK (10)
303128	ALU SHIM 3x6x6.0MM (10)
303128-K	ALU SHIM 3x6x6.0MM - BLACK (10)
303129	COMPOSITE SET OF SHIMS 3x 3x6x1MM; 1x 3x6x2MM (2)
303136	ALU SHIM 3x7x1.0MM (10)
303136-O	ALU SHIM 3x7x1.0MM - ORANGE (10)
303137-K	ALU SHIM 3x7.5x2.0MM - BLACK (10)
303138-K	ALU SHIM 3x7x2.0MM - BLACK (10)
303138-O	ALU SHIM 3x7x2.0MM - ORANGE (10)
303139-K	ALU SHIM 3x6x7.0MM - BLACK (10)
303140-K	ALU SHIM 3x5x2.0MM - BLACK (10)
303140-O	ALU SHIM 3x5x2.0MM - ORANGE (10)
303141	ALU SHIM 3x5x1.0MM (10)
303141-O	ALU SHIM 3x5x1.0MM - ORANGE (10)
303142-K	ALU SHIM 3x5x0.5MM - BLACK (10)
303142-O	ALU SHIM 3x5x0.5MM - ORANGE (10)
303143	ALU SHIM 3x5x0.25MM (10)
303144	ALU SHIM 3x5x4.0MM (10)
303144-O	ALU SHIM 3x5x4.0MM - ORANGE (10)
303146	ALU BUSHING 3x5x6.0MM (2)
303182-G	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT
303182-H	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - HARD - RIGHT
303182-M	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - MEDIUM - RIGHT
303183-G	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT
303183-H	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - HARD - LEFT
303183-M	X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - MEDIUM - LEFT
303211	ALU ADJUSTABLE TURNBUCKLE L/R 30MM - SWISS 7075 T6 (2)
303211-O	ALU ADJ. TURNBUCKLE L/R 30MM - SWISS 7075 T6 (2)
303212	ALU ADJ. TURNBUCKLE L/R 26MM - SWISS 7075 T6 (2)
303433	ALU ANTI-ROLL BAR BUSHING o1.7mm - 6MM (2)
303435	ALU ANTI-ROLL BAR BALL END 3.9MM - SWISS 7075 T6 (2)
303454	COMPOSITE BALL JOINT 4.9MM - OPEN (4)
303458	COMPOSITE ANTI-ROLL BAR BALL JOINT 3.9MM (4)
303755	X4 ALU MOTOR MOUNT WITH 3MM CENTERING PINS
303767	X4 BRASS CHASSIS T-BRACE 8g
303768	X4 ALU CHASSIS T-BRACE - SWISS 7075 T6
303831	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - REAR 1.1MM
303832	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - REAR 1.2MM
303833	X4 ANTI-ROLL BAR UAM - UNDER ARM MOUNT - REAR 1.3MM
304902	X4 BB GEAR DIFFERENTIAL - SET
304911	X4 COMPOSITE GEAR DIFF. CASE WITH 38T PULLEY & COVER
304930	COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4)
304932	GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW
304970	ALU GEAR DIFF OUTDRIVE ADAPTER - 7075 T6 (2)
304972	ALU GEAR DIFF BB DRIVESHAFT ADAPTER - SWISS 7075 T6 (2)
304980	COMPOSITE GEAR DIFF CROSS PIN
304990	DIFF GASKET (4)
305135	COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS - V2 (2)
305136	ALU SOLID AXLE DRIVESHAFT ADAPTERS - HARD COATED (2)
305178	X4 COMPOSITE SOLID AXLE 38T
305241	DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5MM (4)
305242	DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5MM - ORANGE - STRONG (4)
305256	ECS BB SC ALU DRIVE SHAFT SLEEVE - SWISS 7075 T6
305354	X4 ALU WHEEL HUB - SPRING CLIP - OFFSET -0.5MM - SWISS 7075 T6 (2)
305356	X4 ALU WHEEL HUB - SPRING CLIP - SWISS 7075 T6 (2)
305359	X4 ALU WHEEL HUB - SPRING CLIP - OFFSET +0.5MM - SWISS 7075 T6 (2)
305370	X4 ALU DRIVE SHAFT 54MM - SWISS 7075 T6 - HARD COATED
305380	ALU WHEEL SHIM OFFSET 0.75MM (2)
305381	ALU WHEEL SHIM OFFSET 1.0MM (2)
305382	ALU WHEEL SHIM OFFSET 0.5MM (2)
305392	DRIVE SHAFT PIN 2 x 10 WITH FLAT SPOT (2)
305395	ECS BB SC DRIVE SHAFT PIN 2 x 8.4 (2)
305435	HIGH-PERFORMANCE DRIVE BELT 3 x 351MM
305436	HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT 3 x 351MM
305524	X4 ALU SOLID LAYSHAFT & BEARINGS
305579	X4 COMPOSITE PULLEY FOR LAYSHAFT 20T
305772	OFFSET SPUR GEAR 72T / 48 - HARD
305776	OFFSET SPUR GEAR 76T / 48 - HARD
305778	OFFSET SPUR GEAR 78T / 48 - HARD
305779	OFFSET SPUR GEAR 79T / 48 - HARD
305781	OFFSET SPUR GEAR 81T / 48 - HARD
305784	SPUR GEAR 84T / 48
305784-O	SPUR GEAR „H“ 84T / 48 - ORANGE
305860	OFFSET SPUR GEAR 90T / 64
305862	OFFSET SPUR GEAR 92T / 64
305866	OFFSET SPUR GEAR 96T / 64
305866-O	OFFSET SPUR GEAR 96T / 64 - ORANGE
305869	OFFSET SPUR GEAR 99T / 64
305870	OFFSET SPUR GEAR 100T / 64
305870-O	OFFSET SPUR GEAR 100T / 64 - ORANGE
305874	OFFSET SPUR GEAR 104T / 64
305876	OFFSET SPUR GEAR 106T / 64
305878	OFFSET SPUR GEAR 108T / 64
305880	OFFSET SPUR GEAR 110T / 64
305880-O	OFFSET SPUR GEAR 110T / 64 - ORANGE
305882	OFFSET SPUR GEAR 112T / 64
305884	OFFSET SPUR GEAR 114T / 64
305912	NARROW ALU PINION GEAR - HARD COATED 12T / 48
305913	NARROW ALU PINION GEAR - HARD COATED 13T / 48
305914	NARROW ALU PINION GEAR - HARD COATED 14T / 48
305915	NARROW ALU PINION GEAR - HARD COATED 15T / 48
305916	NARROW ALU PINION GEAR - HARD COATED 16T / 48
305918	NARROW ALU PINION GEAR - HARD COATED 18T / 48
305925	NARROW ALU PINION GEAR - HARD COATED 25T / 48
305926	NARROW ALU PINION GEAR - HARD COATED 26T / 48
305927	NARROW ALU PINION GEAR - HARD COATED 27T / 48
305928	NARROW ALU PINION GEAR - HARD COATED 28T / 48
305929	NARROW ALU PINION GEAR - HARD COATED 29T / 48
305931	NARROW ALU PINION GEAR - HARD COATED 31T / 48
305932	NARROW ALU PINION GEAR - HARD COATED 32T / 48
305934	NARROW ALU PINION GEAR - HARD COATED 34T / 48
305968	NARROW ALU PINION GEAR - HARD COATED 18T / 64
305969	NARROW ALU PINION GEAR - HARD COATED 19T / 64
305970	NARROW ALU PINION GEAR - HARD COATED 20T / 64
305971	NARROW ALU PINION GEAR - HARD COATED 21T / 64
305972	NARROW ALU PINION GEAR - HARD COATED 22T / 64
305973	NARROW ALU PINION GEAR - HARD COATED 23T / 64
305974	NARROW ALU PINION GEAR - HARD COATED 24T / 64
305975	NARROW ALU PINION GEAR - HARD COATED 25T / 64
305984	NARROW ALU PINION GEAR - HARD COATED 34T / 64
305985	NARROW ALU PINION GEAR - HARD COATED 35T / 64
306165	T4 GRAPHITE BATTERY STRAP FOR LiPo - SET
306176	GRAPHITE BATTERY ADJ. WIDTH PLATE (2)
306177	GRAPHITE BATTERY PLATE SHIM (2)
306192	COMPOSITE ADJUSTABLE BATTERY HOLDER & BACKSTOP (2+2)
306192-O	ALU ADJUSTABLE BATTERY HOLDER (2)
306219	COMPOSITE SET OF SERVO SHIMS (4)
306222	X4 ALU SERVO MOUNT - BLACK - ONE-PIECE - SWISS 7075 T6
306280	X4 ALU SERVO MOUNT HOLDER - REARWARD - SWISS 7075 T6
306281	X4 ALU SERVO MOUNT HOLDER - FORWARD - SWISS 7075 T6
306301	ANTENNA MOUNT - THIN
306310	ANTENNA (2)
306410	ALU UNIVERSAL MOUNT
306551	XRAY PURE TUNGSTEN CHASSIS WEIGHT 12g
306552	XRAY PURE TUNGSTEN CHASSIS WEIGHT 10g
308026	XLP PROGRESSIVE 2-HOLE 0.8MM DELRIN PISTON (4)
308027	XLP 4-HOLE 1.1-1.2MM DELRIN PISTON (2+2)
308033-K	XLP ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4)
308047	XLP2 ALU SHOCK ADJUSTABLE NUT - BLACK (2)
308084	XLP2 SILICONE HYPER RESISTANT SHOCK ABSORBER MEMBRANE (4)
308129	XLP2 ALU PROGRESSIVE SHOCK SYSTEM - SET (2)
308164	XLP SPRING-SET PROGRESSIVE C=2.4-2.7 (2)
308165	XLP SPRING-SET PROGRESSIVE C=2.5-2.8 (2)
308166	XLP SPRING-SET PROGRESSIVE C=2.6-2.9 (2)
308175	XLP SPRING-SET C=2.5 (2)
308176	XLP SPRING-SET C=2.6 (2)
308177	XLP SPRING-SET C=2.7 (2)
308178	XLP SPRING-SET C=2.8 (2)
308179	XLP SPRING-SET C=2.9 (2)
308180	XLP SPRING-SET C=3.0 (2)
308311	XLP2 ALU SHOCK ABSORBER-SET - BLACK (2)
308328-K	XLP ALU CAP FOR SHOCK BODY - BLACK (2)
308329	XLP2 ALU SHOCK BODY (2)
308337	XLP2 COMPOSITE SHOCK PARTS WITH 2 HOLES
308366	XLP2 HARDENED SHOCK SHAFT (2)
309003	SET OF CERAMIC BALL-BEARINGS (12)
309004	X4 SET OF BALL-BEARINGS (25)
309301	MOUNTING HARDWARE PACKAGE - SET
309319	UNIVERSAL SET OF PLASTIC SHIMS
309402	BODY CLIP FOR 6MM BODY POST (4)
309612	TIRES XXT-M W/O BELT FOR LOW GRIP ASPHALT (2)
309617	TIRES XXT-M W/O BELT FOR ASPHALT (2)
309852	X4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g
309861	SHORT LiPo BALANCING CHASSIS WEIGHT 40G (2)
309862	XRAY STAINLESS STEEL WEIGHT FOR NARROW BATTERY PACK 35G
326177	COMPOSITE BATTERY CLAMP (2)
326181	STAINLESS STEEL BATTERY WEIGHT 35G
353561	ALU REAR WING SHIM (2)
362647	BALL END 4.9MM WITH THREAD 3MM (2)
362648	BALL END 4.9MM WITH THREAD 4MM (2) - (replacement for #302652)
362649	BALL END 4.9MM WITH THREAD 5MM (2)
362650	BALL END 4.9MM WITH THREAD 6MM (2)
362651	BALL END 4.9MM WITH THREAD 8MM (2)
362652	BALL END 4.9MM WITH THREAD 10MM (2)
372503	COMPOSITE SERVO SAVER - X-STIFF - SET - V2
372649	BALL END 4.2MM WITH 4MM THREAD (2)
372661	COMPOSITE STEERING BALL JOINT OPEN 4.2MM (4)
397311	XRAY STICKER FOR BODY - WHITE
397312	XRAY STICKER FOR BODY - METALIC SILVER
397313	XRAY STICKER FOR BODY - PURPLE
397314	XRAY STICKER FOR BODY - NEON RED
397315	XRAY STICKER FOR BODY - NEON YELLOW
397316	XRAY STICKER FOR BODY - NEON ORANGE
397320	XRAY STICKERS FOR BODY - 5 DIFFERENT COLORS
803054	RAIN TIRE 1/10 TOURING (4)

Screws, bearings, o-rings and hardware (53)

Part #	Description
901305	HEX SCREW SB M3x5 (10)
901308	HEX SCREW SB M3x8 (10)
901313	HEX SCREW CENTERING SB M3x12 (10)
901408	HEX SCREW SB M4x8 (10)
902303	HEX SCREW SH M3x4 SMALL HEAD - STAINLESS (10)
902304	HEX SCREW SH M3x4 - STAINLESS (10)
902305	HEX SCREW SH M3x5 (10)
902306	HEX SCREW SH M3x6 (10)
902308	HEX SCREW SH M3x8 (10)
902310	HEX SCREW SH M3x10 (10)
902320	HEX SCREW SH M3x20 (10)
903258	HEX SCREW SFH M2.5x8 (10)
903304	HEX SCREW SFH M3x4 (10)
903305	HEX SCREW SFH M3x5 (10)
903306	HEX SCREW SFH M3x6 (10)
903308	HEX SCREW SFH M3x8 (10)
903310	HEX SCREW SFH M3x10 (10)
903312	HEX SCREW SFH M3x12 (10)
903318	HEX SCREW SFH M3x18 (10)
930154	BALL-BEARING 1.5x4x2 STEEL SEALED - OIL (4)
930306	BALL-BEARING 3x6x2.5 STEEL SEALED - OIL (2)
930308	BALL-BEARING 3x8x4 STEEL SEALED - OIL (2)
930407	BALL-BEARING 4x7x2.5 STEEL SEALED - OIL (2)
930508	BALL-BEARING 5x8x2.5 STEEL SEALED - OIL (2)
940508	BALL-BEARING 5x8x2.5 RUBBER SEALED - OIL (2)
940611	BALL-BEARING 6x10x3 LOW RADIAL PLAY RUBBER SEALED - OIL (2)
941014	BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)
941015	BALL-BEARING 10x15x4 RUBBER SEALED - OIL (2)
960030	NUT M3 (10)
960031	ALU NUT M3 (10)
960140	NUT M4 WITH FLANGE (10)
960240	NUT M4 WITH SERRATED FLANGE (10)
960241-K	ALU NUT M4 WITH SERRATED FLANGE - BLACK (10)
960241-O	ALU NUT M4 WITH SERRATED FLANGE - ORANGE (10)
962042	WASHER S 4x6x0.1 (10)
962043	WASHER S 4x6x0.2 (10)
962045	WASHER S 4x5x0.2 (10)
962061	WASHER S 6x7.5x1.0 (10)
964031	WASHER S 3.5x10x0.2 (10)
964050	WASHER S 5x15x0.3 (10)
965012	E-CLIP 1.2 (10)
965023	E-CLIP 2.3 (10)
966081	CH-CLIP 8 (10)
968037	C-CLIP 3.7 (10)
968071	C-CLIP 7.1 (10)
970050	O-RING 5x1 (10)
970141	O-RING 14 x 1.0 (10)
971240	SILICONE O-RING 24x0.7 (10)
972030	SILICONE O-RING 3x2 (10)
972050	SILICONE O-RING 5x2 (10)
980157	PIN 1.5x7.3 (10)
980210	PIN 2x9.8 (10)
981212	PIN 2x12 (10)

Tools, oils and setup equipment (314)

Part #	Description
101600	HUDY STEEL MINI CLAMP – EXTRA HARD STEEL
104002	HUDY AIR VAC - VACUUM PUMP - ON-ROAD 1/8, 1/10, 1/12
104003	HUDY AIR VAC - VACUUM PUMP WITH TRAY - ON-ROAD 1/8, 1/10, 1/12
105500	HUDY UNIVERSAL TIRE BALANCING STATION
105520	WHEEL ADAPTER FOR 1/10 TOURING CAR
105590	HUDY WHEEL BALANCING PUTTY
106200	HUDY MAGIC CLEANING GUM
106205	HUDY WASH BOX
106210	HUDY GRAPHITE GREASE
106213	HUDY JOINT GREASE
106230	HUDY BEARING OIL
106232	HUDY BEARING OIL - PREMIUM
106260	HUDY TIRE ADDITIVE - CARPET GRIPPER - 65ML
106261	HUDY TIRE ADDITIVE - TIRE GRIPPER RED - 50ML
106262	HUDY TIRE ADDITIVE - TIRE GRIPPER ASPHALT - 50ML
106263	HUDY TIRE ADDITIVE - TIRE GRIPPER HYBRID - 50ML
106281	HUDY BODY FIX 28g/1oz
106290	HUDY ULTIMATE SOLDER 3M LENGTH
106310	HUDY PREMIUM SILICONE OIL 100 cSt - 50ML
106315	HUDY PREMIUM SILICONE OIL 150 cSt - 50ML
106320	HUDY PREMIUM SILICONE OIL 200 cSt - 50ML
106325	HUDY PREMIUM SILICONE OIL 250 cSt - 50ML
106330	HUDY PREMIUM SILICONE OIL 300 cSt - 50ML
106335	HUDY PREMIUM SILICONE OIL 350 cSt - 50ML
106337	HUDY PREMIUM SILICONE OIL 375 cSt - 50ML
106340	HUDY PREMIUM SILICONE OIL 400 cSt - 50ML
106342	HUDY PREMIUM SILICONE OIL 425 cSt - 50ML
106345	HUDY PREMIUM SILICONE OIL 450 cSt - 50ML
106347	HUDY PREMIUM SILICONE OIL 475 cSt - 50ML
106350	HUDY PREMIUM SILICONE OIL 500 cSt - 50ML
106352	HUDY PREMIUM SILICONE OIL 525 cSt - 50ML
106355	HUDY PREMIUM SILICONE OIL 550 cSt - 50ML
106357	HUDY PREMIUM SILICONE OIL 575 cSt - 50ML
106360	HUDY PREMIUM SILICONE OIL 600 cSt - 50ML
106362	HUDY PREMIUM SILICONE OIL 625 cSt - 50ML
106365	HUDY PREMIUM SILICONE OIL 650 cSt - 50ML
106367	HUDY PREMIUM SILICONE OIL 675 cSt - 50ML
106370	HUDY PREMIUM SILICONE OIL 700 cSt - 50ML
106375	HUDY PREMIUM SILICONE OIL 750 cSt - 50ML
106380	HUDY PREMIUM SILICONE OIL 800 cSt - 50ML
106390	HUDY PREMIUM SILICONE OIL 900 cSt - 50ML
106410	HUDY PREMIUM SILICONE OIL 1000 cSt - 50ML
106420	HUDY PREMIUM SILICONE OIL 2000 cSt - 50ML
106430	HUDY PREMIUM SILICONE OIL 3000 cSt - 50ML
106440	HUDY PREMIUM SILICONE OIL 4000 cSt - 50ML
106450	HUDY ULTIMATE SILICONE OIL 5000 cSt - 50ML
106460	HUDY PREMIUM SILICONE OIL 6000 cSt - 50ML
106470	HUDY PREMIUM SILICONE OIL 7000 cSt - 50ML
106480	HUDY PREMIUM SILICONE OIL 8000 cSt - 50ML
106510	HUDY PREMIUM SILICONE OIL 10 000 cSt - 50ML
106512	HUDY PREMIUM SILICONE OIL 9000 cSt - 50ML
106515	HUDY PREMIUM SILICONE OIL 15 000 cSt - 50ML
106520	HUDY PREMIUM SILICONE OIL 20 000 cSt - 50ML
106530	HUDY PREMIUM SILICONE OIL 30 000 cSt - 50ML
106540	HUDY PREMIUM SILICONE OIL 40 000 cSt - 50ML
106550	HUDY PREMIUM SILICONE OIL 50 000 cSt - 50ML
106560	HUDY PREMIUM SILICONE OIL 60 000 cSt - 50ML
106580	HUDY PREMIUM SILICONE OIL 80 000 cSt - 50ML
106610	HUDY PREMIUM SILICONE OIL 100 000 cSt - 50ML
106615	HUDY PREMIUM SILICONE OIL 150 000 cSt - 50ML
106620	HUDY PREMIUM SILICONE OIL 200 000 cSt - 50ML
106630	HUDY PREMIUM SILICONE OIL 300 000 cSt - 50ML
106650	HUDY PREMIUM SILICONE OIL 500 000 cSt - 50ML
106692	HUDY PREMIUM SILICONE OIL 1 000 000 cSt - 50ML
106694	HUDY PREMIUM SILICONE OIL 2 000 000 cSt - 50ML
106900	HUDY OIL BOTTLE, NOSE, STEEL NEEDLE & SAFETY LOCK - 5ML (3)
107150	HUDY GRAPHITE PINION CADDY
107152	SET OF 18 ALU PINIONS 48P WITH CADDY 12T ~ 29T
107153	SET OF 18 ALU PINIONS 64P WITH CADDY 18T ~ 35T
107602	LIMITED EDITION - REAMER FOR BODY + COVER - LARGE
107702	CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2)
107712	CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 CARS (10 MM)
107713	CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (1 MM STEPPED)
107714	ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM
107715	CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED)
107716	ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE
107719	QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM
107750	HUDY GRAPHITE QUICK CAMBER GAUGE 1/10 TOURING 1.5°; 2°; 2.5°
107761	HUDY ADJUSTABLE CAMBER GAUGE 80MM
107771	HUDY BODY GAUGE 1/10 ELECTRIC TOURING CARS
107772	HUDY PROFESSIONAL 1/10 TC WHEEL ARCH MARKER
107839	HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.5”
107840	CLEANING BRUSH LARGE - SOFT
107841	CLEANING BRUSH LARGE - MEDIUM
107842	CLEANING BRUSH LARGE - STIFF
107843	HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.0”
107846	CLEANING BRUSH SMALL - SOFT
107847	CLEANING BRUSH SMALL - MEDIUM
107848	CLEANING BRUSH SMALL - STIFF
107850	HUDY PERSONAL RACING DISPLAY
107855	HUDY PIT LED
107861	HUDY PROFFESIONAL RACING STOPWATCH XL DISPLAY
107865	HUDY ULTIMATE DIGITAL SCALE 300g/0.01g
107866	HUDY PROFFESIONAL DIGITAL POCKET SCALE 3000g/0.1g
107870	HUDY FIBRE-REINFORCED TAPE - BLACK
107871	SELF-ADHESIVE FOAM STRIP (2)
107873	HUDY BUMPER & BODY SPACE SPONGE SET
107875	HUDY ULTRA DOUBLE-SIDED TAPE
107876	HUDY ULTRA THIN DOUBLE-SIDED TAPE - SINGLE STRIP (5)
107880	CHASSIS BALANCING SIMPLE TOOL (2 PCS.)
107904	HUDY QUICK-TWEAK STATION + ALU CARRY CASE
107905	HUDY TWEAK BOARD SET
108150	HUDY TOURING CAR STAND
108190	HUDY ALU PARTS TRAY
108192	HUDY ALU PARTS TRAY NARROW 215x50mm
108193	HUDY ALU PARTS TRAY LARGE 215x100mm
108195	HUDY ALU PARTS TRAY COMPACT - MAGNETIC & ANTI-SLIP
108301	FLAT SET-UP BOARD 1/10 & 1/12 ON-ROAD - LIGHTWEIGHT - GREY
108302	FLAT SET-UP BOARD 1/10 & 1/12 ON-ROAD - LIGHTWEIGHT - SILVER GREY
108303	FLAT SET-UP BOARD 1/10 & 1/12 ON-ROAD - LIGHTWEIGHT - DARK GREY
108304	FLAT SET-UP BOARD 1/10 & 1/12 ON-ROAD - LIGHTWEIGHT - TITAN
108305	FLAT SET-UP BOARD 1/10 & 1/12 ON-ROAD - LIGHTWEIGHT - BLACK
108360	PLASTIC SET-UP BOARD DECAL 282x386mm - 1/10 TC
109301	HUDY SET-UP STATION FOR 1/10 TOURING CARS
109351	SET-UP STATION & SET-UP TOOLS + CARRYING BAG FOR 1/10 TOURING CARS
109360	ALU NUT FOR 1/10 TOURING SET-UP SYSTEM (4)
109370	ALU SET-UP WHEEL FOR 1/10 RUBBER TIRES (4)
109800	HUDY ALU TRAY FOR ON-ROAD DIFF & SHOCKS
109860	HUDY ALU TRAY FOR SET-UP SYSTEM
109880	HUDY ALU TRAY FOR ACCESSORIES & PIT LED
111030	PIN ADAPTER 3.0MM FOR EL. SCREWDRIVER
111035	PIN ADAPTER 3.5MM FOR EL. SCREWDRIVER
111063	LIMITED EDITION - UNIVERSAL HANDLE FOR EL. SCREWDRIVER PINS
111545	LIMITED EDITION - ALLEN WRENCH 1.5 MM
112045	LIMITED EDITION - ALLEN WRENCH 2.0 MM
113045	LIMITED EDITION - ALLEN WRENCH 3.0 MM
133045	LIMITED EDITION - BALL ALLEN WRENCH 3.0 MM
153055	LIMITED EDITION - SLOTTED SCREWDRIVER 3.0MM - LONG
170007	LIMITED EDITION - ALU 1-PIECE SOCKET DRIVER 7.0 MM
175535	LIMITED EDITION - SOCKET DRIVER 5.5 MM
177035	LIMITED EDITION - SOCKET DRIVER 7.0 MM
181030	HUDY SPRING STEEL TURNBUCKLE WRENCH 3MM
181031	ALU TURNBUCKLE WRENCH 3MM - SWISS 7075 T6
181034	HUDY SPRING STEEL TURNBUCKLE WRENCH 3 & 4MM
181040	HUDY SPRING STEEL TURNBUCKLE WRENCH 4MM
181041	ALU TURNBUCKLE WRENCH 4MM - SWISS 7075 T6
181090	HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS
181091	HUDY TURNBUCKLE WRENCH 3 & 4MM
181110	HUDY BALL JOINT WRENCH
183011	HUDY PROFESSIONAL MULTI TOOL
188980	HUDY BLADE HOBBY KNIFE WITH ALU HANDLE
188981	HUDY POCKET HOBBY KNIFE
188984	HUDY REPLACEABLE HOBBY KNIFE BLADES (10PCS)
188985	HUDY REPLACEABLE HOBBY KNIFE BLADES (5PCS)
188990	HUDY ULTIMATE BODY SCISSORS
189000	HUDY MICRO RC PLIERS SET + CARRYING BAG
190001	SET OF TOOLS + CARRYING BAG - FOR ELECTRIC TOURING CARS
190005	HUDY LIMITED EDITION TOOL SET + CARRYING BAG
190006	PT SET OF TOOLS + CARRYING BAG - FOR ALL CARS
190070	SET OF POWER TOOL TIPS (HEX 2, 2.5, 3MM + PHILLIPS 4, 5.8MM)
199011-H	HUDY HARD CASE - 230x180x45MM - TOOL BAG SMALL
199060	HUDY ALU TOOL STAND
199100	HUDY 1/10 TOURING CARRYING BAG + TOOL BAG - V2 - EXCLUSIVE EDITION
199110	HUDY 1/10 CARRYING BAG - COMPACT
199150	HUDY CARGO BAG - EXCLUSIVE EDITION
199155L	HUDY TRAVEL BAG - LARGE
199157L	HUDY HAND BAG - LARGE
199170	HUDY TRANSMITTER BAG - LARGE - EXCLUSIVE EDITION
199171	HUDY TRANSMITTER BAG - COMPACT - EXCLUSIVE EDITION
199171-H	HUDY HARD CASE - 185x220x145MM - TRANSMITTER SANWA MT4, MT44 & M17
199175	HUDY RADIO WINTER BAG - EXCLUSIVE EDITION
199176	HUDY HEAT PACK GEL
199181	HUDY CAR BAG - 1/10 ON-ROAD - TOURING - PAN CAR
199181-H	HUDY HARD CASE - 440x220x115MM - 1/10 ON-ROAD CAR
199190	HUDY TEAM RUCKSACK
199191	HUDY TEAM BACKPACK XL
199199	HUDY EURO POUCH
199210	HUDY SET-UP BOARD BAG 1/10 & 1/12 ON-ROAD
199221	HUDY SET-UP BAG FOR 1/10 TOURING CARS, 1/10 & 1/12 PAN CARS, 1/10 FORMULA
199260	HUDY PIT LED BAG
199270	HUDY LIPO SAFETY BAG
199271	HUDY LIPO SAFETY BAG - COMPACT
199280L	HUDY OIL BAG - LARGE
199280L-H	HUDY HARD CASE - 180x140x120MM - OIL BAG LARGE
199280M	HUDY OIL BAG - MEDIUM
199280M-H	HUDY HARD CASE - 140x110x95MM - OIL BAG MEDIUM
199290	HUDY ACCESSORIES BAG
199290-H	HUDY HARD CASE - 235x190x75MM
199291-H	HUDY HARD CASE - 135x85x75MM - ACCESSORIES / AIR VAC ON-ROAD
199292-H	HUDY HARD CASE - 175x85x75MM - ACCESSORIES / AIR VAC 1/10 OFF-ROAD
199293-H	HUDY HARD CASE - 175x110x75MM
199294-H	HUDY HARD CASE - 215x90x85MM - ACCESSORIES / AIR VAC 1/8 OFF-ROAD
199295-H	HUDY HARD CASE - 280x150x85MM - ACCESSORIES BAG LARGE
199296-H	HUDY HARD CASE - 120x85x46MM - ACCESSORIES / STOP WATCH
199297-H	HUDY HARD CASE - 320x220x145MM - ELECTRONICS
199910	HUDY PIT MAT 750x1200MM
199911	HUDY PIT MAT ROLL 750x1200MM
199912	HUDY PIT MAT ROLL 600x950MM
199913L	HUDY PIT MAT FULL COLOR 650x1200MM
199913M	HUDY PIT MAT FULL COLOR 650x950MM
209065	HUDY COMPACT CLEANING TOWEL (10)
209073	HUDY EXCLUSIVE PIT TOWEL 1100 x 700
209200	HUDY CHASSIS PROTECTOR VINYL STICKER 360x125mm
209240	HUDY BODY POST HOLE PROTECTOR VINYL STICKER 7x16x0.5MM (8)
286990	HUDY FACE MASK
293010	HUDY STAINLESS STEEL BATTERY WEIGHT 50G
293011	HUDY STAINLESS STEEL BATTERY WEIGHT 35G
293012	HUDY STAINLESS STEEL BATTERY WEIGHT FOR NARROW BATTERY PACK 35G
293081	HUDY PURE TUNGSTEN WEIGHT 5g
293082	HUDY PURE TUNGSTEN WEIGHT 10g
293083	HUDY PURE TUNGSTEN WEIGHT 15g
293085	HUDY PURE TUNGSTEN WEIGHT THIN ROUND 15mm WITH M3 - 10g
293086	HUDY PURE TUNGSTEN WEIGHT THIN - 24.5x24.5MM - 15g
293087	HUDY PURE TUNGSTEN WEIGHT THIN - 31x26MM - 20g
293100	HUDY ALU RC FAN 30MM - BOTTOM MOUNT 2 HOLE
293101	HUDY ALU RC FAN 30MM - SIDE MOUNT 2 HOLE
293102	HUDY ALU RC FAN 30MM - TOP/SIDE MOUNT 4 HOLE
293110	HUDY BRUSHLESS RC FAN 30MM - WITH EXTERNAL SOLDERING TABS
293112	HUDY BRUSHLESS RC FAN 30MM - WITH INTERNAL SOLDERING TABS
293352	HUDY ALU FIXED SERVO SAVER 1/10 TC & FWD - SET
293561	HUDY ALU REAR WING SHIM (2)
293561-K	HUDY ALU REAR WING SHIM - BLACK (2)
293561-O	HUDY ALU REAR WING SHIM - ORANGE (2)
294017	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 17T / 48
294019	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 19T / 48
294020	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 20T / 48
294021	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 21T / 48
294022	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 22T / 48
294023	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 23T / 48
294024	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 24T / 48
294030	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 30T / 48
294033	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 33T / 48
294035	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 35T / 48
294126	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 26T / 64
294127	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 27T / 64
294128	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 28T / 64
294129	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 29T / 64
294130	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 30T / 64
294131	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 31T / 64
294132	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 32T / 64
294133	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 33T / 64
294136	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 36T / 64
294137	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 37T / 64
294138	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 38T / 64
294139	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 39T / 64
294140	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 40T / 64
294141	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 41T / 64
294142	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 42T / 64
294143	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 43T / 64
294144	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 44T / 64
294145	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 45T / 64
294146	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 46T / 64
294147	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 47T / 64
294148	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 48T / 64
294149	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 49T / 64
294150	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 50T / 64
294151	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 51T / 64
294152	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 52T / 64
294153	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 53T / 64
294154	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 54T / 64
294155	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 55T / 64
294156	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 56T / 64
294157	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 57T / 64
294158	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 58T / 64
294159	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 59T / 64
294160	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 60T / 64
294162	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 62T / 64
294164	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 64T / 64
298010	HUDY HARDWARE BOX - DOUBLE-SIDED
298011	HUDY HARDWARE BOX - DOUBLE-SIDED - COMPACT
298012	HUDY PARTS BOX - 10-COMPARTMENTS
298013	HUDY SPRINGS BOX - 10-COMPARTMENTS
298014	HUDY PARTS BOX - 8-COMPARTMENTS
298015	HUDY PARTS CASE - 290 x 195mm
298016	HUDY TINY HARDWARE BOX - 4-COMPARTMENTS
298017	HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS
298018	HUDY TINY HARDWARE BOX - 8-COMPARTMENTS
298019	HUDY DIFF BOX - 8-COMPARTMENTS
298021	HUDY HARDWARE BOX - DOUBLE-SIDED - SMALL
298022	HUDY TINY HARDWARE BOX - 10-COMPARTMENTS
298025	HUDY PARTS CASE - 275 x 180mm
298100	HUDY TIN ROUND BOX 80x30MM
301158	X4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)
302640	X4 ADJUSTABLE CAMBER SCREW 14MM M4 L/R - HUDY SPRING STEEL™ (2)
303210	REAR TURNBUCKLE L/R 26MM - HUDY SPRING STEEL™ (2)
303232	X4 UPPER ARM BALL UNIVERSAL 4.9MM - HUDY SPRING STEEL™ (2)
303250	X4 LOWER ARM BALL UNIVERSAL 6.0MM WITH HEX - HUDY SPRING STEEL™ (2)
303260	X4 PIVOT BALL 6.0MM WITH M3x5.5MM THREAD - HUDY SPRING STEEL™ (2)
303261	X4 PIVOT BALL 6.0MM WITH M3x6.5MM THREAD - HUDY SPRING STEEL™ (2)
304973	STEEL GEAR DIFF BB DRIVESHAFT ADAPTER - HUDY SPRING STEEL™ (2)
305134	STEEL SOLID AXLE DRIVESHAFT ADAPTER - HUDY SPRING STEEL™ (2)
305137	STEEL SOLID AXLE DRIVESHAFT ADAPTER - LIGHTWEIGHT - HUDY SPRING STEEL™ (2)
305138	SOLID AXLE ECS BB DRIVESHAFT ADAPTER - HUDY SPRING STEEL™ (2)
305231	DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
305245	ECS BB DRIVE SHAFT ADAPTER - HUDY SPRING STEEL™ (2)
305255	ECS BB SC DRIVE SHAFT CASE - HUDY SPRING STEEL™
305257	ECS BB SC DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
305260	X4 ECS DRIVE SHAFT 58MM - HUDY SPRING STEEL™ (1)
305306	X4 ECS BB DRIVE SHAFT 58MM - HUDY SPRING STEEL™ - SET
305307	X4 ECS BB DRIVE SHAFT 59MM - HUDY SPRING STEEL™ - SET
305316	X4 ECS BB DRIVE SHAFT 58MM - HUDY SPRING STEEL™ (2)
305317	X4 ECS BB DRIVE SHAFT 59MM - HUDY SPRING STEEL™ (2)
305335	X4 ECS BB SC DRIVE SHAFT 58MM - HUDY SPRING STEEL™ - COMPLETE SET
305337	X4 CVD BB DRIVE SHAFT 52MM - HUDY SPRING STEEL™ (2)
305338	X4 CVD BB DRIVE SHAFT 54MM - HUDY SPRING STEEL™ (2)
305348	X4 CVD DRIVE AXLE SCS - SPRING CLIP SYSTEM - HUDY SPRING STEEL™
305349	X4 ECS DRIVE AXLE SCS - SPRING CLIP SYSTEM - HUDY SPRING STEEL™
305360	X4 ECS DRIVE SHAFT 58MM - HUDY SPRING STEEL™ - SET
305407	X4 CVD BB DRIVE SHAFT 52MM - HUDY SPRING STEEL™ - SET
305408	X4 CVD BB DRIVE SHAFT 54MM - HUDY SPRING STEEL™ - SET
372651	PIVOT BALL UNIVERSAL 4.9MM - HUDY SPRING STEEL™ (2)
803041	HUDY 1/10 PRE-CUT SLICK BELTED TIRES RIGHT & LEFT (2+2)
803053	HUDY 1/10 TC CARPET TIRES C3-28 (4)
803062	HUDY 1/10 TC TIRES A1-36 - ASPHALT (4)
913300	HEX SCREW 110° FOR 301020 X4 CHASSIS - HUDY SPRING STEEL™ (33)
913305	HEX SCREW 110° SFH M3x5 - CNC MACHINED - HUDY SPRING STEEL™ (4)
913308	HEX SCREW 110° SFH M3x8 - CNC MACHINED - HUDY SPRING STEEL™ (4)
913312	HEX SCREW 110° SFH M3x12 - CNC MACHINED - HUDY SPRING STEEL™ (4)
990004	HUDY TITAN BALL STUD D=4.9 / L=4 / S=3.5 / 2mm HEX (2)
990006	HUDY TITAN BALL STUD D=4.9 / L=6 / S=3.5 / 2mm HEX (2)
990008	HUDY TITAN BALL STUD D=4.9 / L=8 / S=3.5 / 2mm HEX (2)
990010	HUDY TITAN BALL STUD D=4.9 / L=10 / S=3.5 / 2mm HEX (2)
990101	HUDY TITAN PIVOT BALL D=4.9 / S=5 / 3mm HEX (2)
990102	HUDY TITAN PIVOT BALL D=4.9 / S=3.5 / 3mm HEX (2)