| Part number | Part name |
|---|---|
| 340010 | XRAY XB4'22 - 4WD 1/10 ELECTRIC OFF-ROAD CAR - CARPET |
| 340020 | XRAY XB4'22 - 4WD 1/10 ELECTRIC OFF-ROAD CAR - DIRT |
| 106853 | HUDY SET OF REPLACEMENT DRIVE SHAFT PINS 2.5x10 (10) |
| 106210 | HUDY GRAPHITE GREASE |
| 106250 | HUDY ULTIMATE SILICONE OIL 5000 - 50ML |
| 106355 | HUDY ULTIMATE SILICONE OIL 5500 - 50ML |
| 106360 | HUDY ULTIMATE SILICONE OIL 6000 - 50ML |
| 106365 | HUDY ULTIMATE SILICONE OIL 7000 - 50ML |
| 106470 | HUDY ULTIMATE SILICONE OIL 7000 - 6x 50ML |
| 106510 | HUDY ULTIMATE SILICONE OIL 10,000 - 50ML |
| 106515 | HUDY ULTIMATE SILICONE OIL 10,000 - 6x 50ML |
| 107872 | VELCRO TAPE WITH DOUBLE SIDED TAPE 8MM |
| 108010 | HUDY SELF-ADHESIVE FOAM STRIP (2) |
| 308645 | COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4) |
| 308121 | ALLU SHIM 3x6x2.0MM (10) |
| 308125 | ALLU SHIM 3x6x3.0MM (10) |
| 308130 | COMPOSITE SET OF SHIMS 3x6x1.0MM, 1x 3x6x2.0MM (2) |
| 308431 | ALLU 4.9MM BALL END - BLACK (2) |
| 308451 | BALL JOINT 4.9MM - OPEN (1) |
| 304930 | COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2 + 4) |
| 304932 | GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2 + 4) - LOW |
| 304980 | COMPOSITE GEAR DIFF CROSS PIN |
| 304990 | DIFF GASKET (4) |
| 305820 | BALL DIFFERENTIAL SPRING |
| 306208 | ALLU SERVO MOUNT 3MM - BOTH SIDES THREADED |
| 306219 | COMPOSITE SET OF SERVO SHIMS (4) |
| 332610 | ADJ. TURNBUCKLE 5MM RH - HARD SPRING STEEL (2) |
| 223354 | COMPOSITE UPRIGHT REAR - HARD |
| 323982 | ALLU REAR HUB PLATE FOR HUB1 ADJ. UPRIGHT - 1 HOLE |
| 323513 | LEXAN REAR WING - RACE |
| 323517 | LEXAN REAR WING - TEC |
| 324710 | COMPOSITE ADJUSTMENT BALL-BEARING HUB - 1 + 2 + 3 DOTS (2) |
| 325377 | REAR DRIVE SHAFT 77MM WITH 2.5MM PIN |
| 325440 | REAR DRIVE AXLE L=8 - HARD SPRING STEEL |
| 336717 | COMPOSITE BATTERY CLAMP (2) |
| 327710 | FRONT SUSPENSION PIVOT PIN (2) |
| 329913 | 2WD/4WD REAR WHEEL AXLE/OSSA - 12MM HARD - WHITE (2) |
| 332540 | ALLU SERVO SAVER ADJUSTABLE NUT |
| 332561 | SERVO WAILER SPRING C=1.4 |
| 332640 | PIVOT BALL 5.8 (10) |
| 352610 | ADJ. TURNBUCKLE 10L RH 4.5MM - SPRING STEEL - V3 (2) |
| 354280 | BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET |
| 399850 | BALL-BEARING 6x14 SOLID STEEL SEALED - GRASSE - V2 (2) |
| 361111 | EB4'22 ALLU CHASSIS - SWISS 7075 T6 - 2MM |
| 361159 | EB4'22 GRAPHITE CENTER UPPER DECK 2.0MM |
| 361176 | EB4'22/DT'12/2 GRAPHITE CENTER UPPER DECK 2.0MM |
| 361180 | GRAPHITE REAR DOG BONE SET LONG (2) |
| 361191 | GRAPHITE CHASSIS BRACE DECK - REAR - 2.0MM |
| 361201 | COMPOSITE FRONT BUMPER - ONE HOLE |
| 361272 | COMPOSITE CHASSIS SIDE GUARDS L + R - HARD |
| 361286 | COMPOSITE CHASSIS BRACE FRONT - HARD |
| 361288 | EB4'22 GRAPHITE CHASSIS WIRE COVER 2.2MM |
| 361289 | EB4'22 GRAPHITE CHASSIS T-BRACE - FRONT - 2.2MM |
| 361297 | COMPOSITE CHASSIS BRACE REAR - HARD |
| 361321 | BODY MOUNT - SHORT - 9 SHIMS - SET |
| 361322 | BODY MOUNT - EXTRA SHORT |
| 362086 | DIFF BULKHEAD - HORIZONTAL SPLIT DESIGN (MS) - SET |
| 362086 | GRAPHITE SHOCK TOWER FOR (MS) - FRONT - 1.5MM |
| 362112 | COMPOSITE SUSPENSION ARM FRONT LOWER - HARD |
| 362170 | COMPOSITE UPRIGHT - REAR, RIGHT - HARD |
| 362229 | COMPOSITE C-HUB'B' DEG. LEFT - HARD |
| 362290 | COMPOSITE STEERING BLOCK - HARD |
| 362280 | ALLU CONICAL SHIM 3x6x2.0MM - BLACK |
| 362290 | STEEL STEERING BUSHING - SHORT (2) |
| 362291 | STEEL STEERING BUSHING - LONG (2) |
| 362313 | ALLU LOWER SUSP HOLDER FOR 06L - FRONT |
| 362315 | ECCENTRIC BUSHING SET (2) |
| 362316 | OPEN ECCENTRIC BUSHING SET (2) |
| 362333 | ALLU LOWER SUSP HOLDER FOR 06R (RS) - FRONT-REAR |
| 362370 | ANGLE HUB FOR REAR BEVEL GEAR - REAR RH - 1 + 2 + 3 DOTS |
| 362371 | ANGLE HUB FOR BEVEL DRIVE GEAR - FRONT - 1 DOT |
| 362373 | ANGLE HUB FOR BEVEL DRIVE GEAR - FRONT - 3 DOTS |
| 362400 | ANTI-ROLL BAR 1.0MM SET |
| 362472 | ANTI-ROLL BAR 1.2 MM |
| 362473 | ANTI-ROLL BAR 1.3 MM |
| 362510 | COMPOSITE SERVO SAVER |
| 362540 | ALLU SERVO SAVER MAIN SHAFT |
| 362552 | SERVO SAVER PIVOT SHAFT - 5MM (2) |
| 362571 | COMPOSITE STEERING PLATE |
| 362581 | STEERING BLADE 2.0MM GRAPHITE |
| 362610 | BALL TURNBUCKLE 5MM RH - HARD SPRING STEEL * (2) |
| 362615 | BALL JOINT 4.9MM WITH THREADED ARM (2) |
| 362625 | BALL END 4.9MM WITH THREADED ARM (2) |
| 363085 | GRAPHITE SHOCK TOWER FOR HORIZONTAL SPLIT BULKHEAD (RS) - REAR - 1.5MM |
| 363113 | COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - HARD |
| 363123 | COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - HARD |
| 363240 | BALL UNIVERSAL 5.8MM WITH BACKSTOP (2) |
| 363316 | ALLU LOWER SUSP HOLDER FOR HORIZONTAL SPLIT BULKHEAD (RS) - REAR-FRONT |
| 363385 | ALLU LOWER SUSP HOLDER FOR HORIZONTAL SPLIT BULKHEAD (RS) - REAR-REAR |
| 363530 | REAR WING POST - V2 (2) |
| 364013 | ALLU MOTOR BULKHEAD - LOW |
| 364083 | COMPOSITE CENTRAL BULKHEAD - LOW |
| 364025 | EB4'22 ALLU CENTRAL BULKHEAD - SWISS 7075 T6 |
| 364090 | ALLU ECCENTRIC MOTOR BULKHEAD - V3 |
| 364101 | ONE-WAY SLIPPER CLUTCH SET |
| 364110 | ONE-WAY SLIPPER CLUTCH SHAFT - HUDY SPRING STEEL |
| 364124 | ALLU PLATE FOR ONE-WAY SLIPPER CLUTCH - FRONT - SWISS 7075 T6 |
| 364125 | ALLU PLATE FOR ONE-WAY SLIPPER CLUTCH FOR OUTDRIVE - SWISS 7075 T6 |
| 364126 | ALLU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6 |
| 364131 | SLIPPER CLUTCH PAD 5.5 - SOFT (3) |
| 364133 | SLIPPER CLUTCH ONE-WAY OUTDRIVE PAD 5.5 - SOFT (2) |
| 364151 | STEEL BUSHING FOR ONE-WAY SLIPPER CLUTCH |
| 364160 | SCREW FOR ONE-WAY SLIPPER CLUTCH ADJUSTMENT - HUDY SPRING STEEL * |
| 364175 | OUTDRIVE ADAPTER WITH PRESSED ONE-WAY BEARING - HUDY SPRING STEEL * |
| 364183 | SLIPPER CLUTCH SPRING C=5.0 - BLACK |
| 364192 | ALLU NUT FOR ONE-WAY SLIPPER CLUTCH |
| 364953 | GEAR DIFFERENTIAL - LARGE VOLUME - SET |
| 364904 | GEAR CENTER DIFFERENTIAL - LARGE VOLUME - SET |
| 364912 | COMPOSITE GEAR DIFFERENTIAL CASE - LARGE VOLUME |
| 364913 | COMPOSITE CENTER GEAR DIFFERENTIAL ADAPTER - LARGE VOLUME |
| 364970 | COMPOSITE GEAR DIFFERENTIAL COVER - LARGE VOLUME |
| 364940 | STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 407 |
| 364942 | GEAR DIFF OUTDRIVE ADAPTER FOR LARGE VOLUME DIFF - HUDY SPRING STEEL * (1) |
| 364993 | CENTER GEAR DIFF OUTDRIVE ADAPTER FOR LARGE VOLUME DIFF (1 + 1) |
| 364981 | COMPOSITE CENTER DIFF SPRING GEAR 8/8 (4) |
| 365127 | STEEL BEVEL DRIVE GEAR - CNC MACHINED - 16T |
| 365225 | FRONT DRIVE SHAFT 82MM WITH 2.5MM PIN - HUDY SPRING STEEL * |
| 365230 | DRIVE SHAFT COUPLING - HUDY SPRING STEEL * |
| 365240 | FRONT DRIVE AXLE - HUDY SPRING STEEL * |
| 365350 | ALLWHEEL HUB 18MM - V2 (2) |
| 365356 | ALLWHEEL HUB 12MM - OFFSET, + 1.5MM/4* (2) |
| 365357 | ALLWHEEL HUB 12MM - OFFSET, + 2.25MM/2* (2) |
| 365431 | CENTRAL DOGBONE DRIVE SHAFT 47MM - HUDY SPRING STEEL * (2) |
| 365445 | CENTRAL DOGBONE DRIVE SHAFT 117MM - HUDY SPRING STEEL * |
| 365446 | CENTRAL DOGBONE DRIVE SHAFT 63MM - HUDY SPRING STEEL * |
| 365447 | CENTRAL DOGBONE SHAFT UNIVERSAL JOINT - HUDY SPRING STEEL * |
| 365470 | COMPOSITE DRIVE SHAFT SAFETY COLLAR - V2 (0) |
| 368101 | COMPOSITE 3-PAD SLIPPER CLUTCH SPRUE GEAR 817 / 48 |
| 368011 | ALLU BRACE MOUNT - SWISS 7075 T6 (2) |
| 368043 | COMPOSITE RADIAL PLATE - SHORT |
| 368143 | COMPOSITE BATTERY HOLDER STAND - SHORT (2) |
| 368161 | SET OF O-RINGS (6,2,1,6,4,6), 64x, 64xSW |
| 368165 | ALLU SERVO MOUNT 3MM - BOTH SIDES THREADED |
| 368231 | GRAPHITE SERVO HOLDER 2.2MM |
| 368710 | SUSPENSION PIVOT PIN (2) |
| 368720 | FRONT ARM PIVOT PIN (2) |
| 368010 | COMPOSITE SHOCK PARTS |
| 368031 | SHOCK POSTS - COMPLETE SET - DELRIN |
| 368040 | ALLU SHOCK ADJUSTABLE NUT (2) |
| 368052 | COMPOSITE SHOCK BUSHING & SHIM FOR ALL CUP (2 + 2) |
| 368055 | STEEL SCREW SHOCK PIVOT BALL WITH HEX (2) |
| 368121 | ALLU FRONT SHOCK BODY 32MM - V2 (1) |
| 368122 | ALLU FRONT SHOCK BODY CUP (2) |
| 368161 | FRONT HARDENED SHOCK SHAFT 43MM (2) |
| 368184 | FRONT SPRING - SET - 2 DOTS (2) |
| 368190 | FRONT SPRING SET L = 42MM - 4 DOTS (4) |
| 368200 | REAR SHOCK ABSORBERS COMPLETE SET (2) |
| 368220 | ALLU REAR SHOCK BODY (2) |
| 368260 | REAR HARDENED SHOCK SHAFT (2) |
| 368285 | REAR SPRING - SET - 2 DOTS (2) |
| 368293 | REAR SPRING SET L = 37MM - 3 DOTS (2) |
| 368300 | 3X10 MOUNTING HARDWARE PACKAGE - SET |
| 368710 | BODY FOR 1/10 4WD OFF-ROAD BUGGY - GARAGE 4 |
| 368710 | BODY FOR 1/10 4WD OFF-ROAD BUGGY - GARAGE 4 |
| 368720 | BODY FOR FRONT WHEEL AERODISK WITH TREAD NEI (FAR) - WHITE (2) |
| 368730 | BODY FOR STOCKER FOR BODY - WHITE |
| 001120 | SET OF ALL SHIM (3.5x8mm, 1.5x8mm, 2.5x8mm) |
| 001121 | SET OF ALL SHIM (1.2mm, 2.0mm, 3.0mm) |
| 001212 | ALLU SHIM 3x6x4.0MM - BLACK (10) |
| 001213 | ALLU SHIM 3x6x4.0MM - ORANGE (10) |
| 001212-4 | ALLU SHIM 3x6x3.0MM - BLACK (10) |
| 001213-4 | ALLU SHIM 3x6x3.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
| 001215-4 | ALLU SHIM 3x6x2.0MM - ORANGE (10) |
.avif)
.avif)