Parts listSource: XRAY

XRAY XB4 26 Parts List

XRAY

XB4 '26

Setup sheets →

Spring chart 1/10 off-road tire chart Diff oil chart Shock oil chart XB4 '26 parts & upgrades at AMain →Ad

Commonly replaced parts

The arms, uprights, driveline and shock parts that go first on a race car, with the full list below.

Part #	Description
362112-G	COMPOSITE SUSPENSION ARM FRONT LOWER - GRAPHITE
360901	ALU STEERING BLOCKS & 7° C-HUBS - LIGHTWEIGHT - SET
362250-G	COMPOSITE STEERING BLOCK - GRAPHITE
323354-G	COMPOSITE UPRIGHT REAR - UPPER POSITION - GRAPHITE
305394	ECS DRIVE SHAFT PIN 2 x 9 WITH FLAT SPOT (2)
325340-L	REAR DRIVE AXLE LB FOR REAR UPRIGHT - LOWER POSITION
365351	ALU WHEEL HUB 14MM - OFFSET -0.75MM (2)
368032	SHOCK PISTONS - COMPLETE SET - DELRIN - BIG BORE
362390	ALU REAR SHOCK ABSORBER ADAPTER (1+1) - SET
302663	COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8)
352460	PIVOT BALL 5.8 (10)
352610	ADJ. TURNBUCKLE M3 L/R 45MM - SPRING STEEL - V3 (2)
364131	SLIPPER CLUTCH PAD SLS - SOFT (3)
304990	DIFF GASKET (4)

More option parts for this car

Parts & upgrades at AMainAd Spring chart 1/10 off-road tire chart Diff oil chart Shock oil chart

Every part XRAY lists for the XRAY XB4 26, from XRAY's own parts list, including the spares, the option parts and the hardware. Part numbers link to AMain Hobbies where the part is still sold; parts with no current match are listed as plain text.

Full parts list

Car parts (367)

Part #	Description
293080	LEAD WEIGHTS 4x5g & 4x10g WITH 3M GLUE
293084	PRECISION BALANCING CHASSIS WEIGHT 10g (4)
293404	ALU CLAMP SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 2-HOLE - 23T
293405	ALU CLAMP SERVO HORN - HITEC - 2-HOLE - 24T
293406	ALU CLAMP SERVO HORN - FUTABA - 2-HOLE - 25T
293414	ALU ADJUSTABLE CLAMP STEERING SERVO HORN - KO PROPO, SANWA - 23T
293416	ALU ADJUSTABLE CLAMP STEERING SERVO HORN - FUTABA, SAVÖX - 25T
293421	ALU CLAMP STEERING SERVO HORN - EXTENDED 8MM - KO PROPO, SANWA - 23T
293422	ALU CLAMP STEERING SERVO HORN - EXTENDED 8MM - FUTABA, SAVÖX - 25T
293497	ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 2-HOLE - 23T
293498	ALU SERVO HORN - HITEC - 2-HOLE - 24T
293499	ALU SERVO HORN - FUTABA - 2-HOLE - 25T
296509	ALU COUNTERSUNK SERVO SHIM (10)
296509-K	ALU COUNTERSUNK SERVO SHIM - BLACK (10)
296509-O	ALU COUNTERSUNK SERVO SHIM - ORANGE (10)
296510	ALU COUNTERSUNK SHIM (10)
296510-B	ALU COUNTERSUNK SHIM - BLUE (10)
296510-O	ALU COUNTERSUNK SHIM - ORANGE (10)
296510-V	ALU COUNTERSUNK SHIM - VIOLET (10)
296530-B	ALU NUT M3 - BLUE (10)
296530-K	ALU NUT M3 - BLACK (10)
296530-O	ALU NUT M3 - ORANGE (10)
296541-B	ALU NUT M4 WITH SERRATED FLANGE - BLUE (4)
296541-K	ALU NUT M4 WITH SERRATED FLANGE - BLACK (4)
296541-O	ALU NUT M4 WITH SERRATED FLANGE - ORANGE (4)
296541-V	ALU NUT M4 WITH SERRATED FLANGE - VIOLET (4)
302292	STEEL STEERING BUSHING LONG (4)
302293	C-HUB BUSHING COMPOSITE - V2 (4)
302663	COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8)
302663-V2	COMPOSITE BALL JOINT 4.9MM - OPEN (8)
302665	COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4)
303120	SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
303121	SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM)
303121-K	ALU SHIM 3x6x0.5MM - BLACK (10)
303121-O	ALU SHIM 3x6x0.5MM - ORANGE (10)
303122	ALU SHIM 3x6x1.0MM (10)
303122-K	ALU SHIM 3x6x1.0MM - BLACK (10)
303122-O	ALU SHIM 3x6x1.0MM - ORANGE (10)
303123	ALU SHIM 3x6x2.0MM (10)
303123-K	ALU SHIM 3x6x2.0MM - BLACK (10)
303123-O	ALU SHIM 3x6x2.0MM - ORANGE (10)
303124-K	ALU SHIM 3x6x2.5MM - BLACK (10)
303125	ALU SHIM 3x6x3.0MM (10)
303125-K	ALU SHIM 3x6x3.0MM - BLACK (10)
303125-O	ALU SHIM 3x6x3.0MM - ORANGE (10)
303126	ALU SHIM 3x6x5.0MM (10)
303126-K	ALU SHIM 3x6x5.0MM - BLACK (10)
303127	ALU SHIM 3x6x4.0MM (10)
303127-K	ALU SHIM 3x6x4.0MM - BLACK (10)
303129	COMPOSITE SET OF SHIMS 3x 3x6x1MM, 1x 3x6x2MM (2)
303455	COMPOSITE ANTI-ROLL BAR o1.6MM BALL JOINT 4.9MM (4)
303456	COMPOSITE ANTI-ROLL BAR o2.0MM BALL JOINT 4.9MM (4)
304930	COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4)
304932	GRAPHITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - LOW
304980	COMPOSITE GEAR DIFF CROSS PIN
304990	DIFF GASKET (4)
305092	BALL DIFFERENTIAL SPRING
305394	ECS DRIVE SHAFT PIN 2 x 9 WITH FLAT SPOT (2)
306219	COMPOSITE SET OF SERVO SHIMS (4)
309402	BODY CLIP FOR 6MM BODY POST (4)
321291	COMPOSITE 5-WIRES HOLDER - SET
322051	COMPOSITE FRONT SHOCK TOWER INSERT (2)
322440	ALU ANTI-ROLL BAR COLLAR
322591	ALU SHIM 3x4.7x0.5MM (10)
322660	COMPOSITE BALL JOINT 5.4MM (12+1+1)
323354-G	COMPOSITE UPRIGHT REAR - UPPER POSITION - GRAPHITE
323354-H	COMPOSITE UPRIGHT REAR - UPPER POSITION - HARD
323354-M	COMPOSITE UPRIGHT REAR - UPPER POSITION - MEDIUM
323355	ALU MULTI ADJUSTABLE REAR UPRIGHT - UPPER POSITION - SWISS 7075 T6
323356	ALU MULTI ADJUSTABLE REAR UPRIGHT - LOWER POSITION - SWISS 7075 T6
323357-G	COMPOSITE UPRIGHT REAR - LOWER POSITION - GRAPHITE
323357-M	COMPOSITE UPRIGHT REAR - LOWER POSITION - MEDIUM
323382	ALU REAR HUB PLATE FOR MULTI ADJ. UPRIGHT - 1-HOLE - SWISS 7075 T6
323510	LEXAN REAR WING
323511	LEXAN REAR WING - THICK
323513	LEXAN REAR WING - RANK
323515	LEXAN REAR WING CENTER FIN - ZAP (2)
323517	LEXAN REAR WING - TEC
323522	LEXAN REAR WING - LUSH
323523	LEXAN REAR WING - LUSH - THICK
323525	LEXAN REAR WING - LUSH - WIDE
323526	LEXAN REAR WING - LUSH - WIDE - THICK
323560	CARBON REAR WING SHIM
324172	COMPOSITE ADJUSTMENT BALL-BEARING HUB - 1+2+3 DOTS (2)
325123	ACTIVE DIFF SEGMENT 60° (2)
325125	ACTIVE DIFF SEGMENT 90° (2)
325127	ACTIVE DIFF SEGMENT 120° (2)
325130	ACTIVE DIFF STEEL BEVEL & SATELLITE GEARS (2+4)
325340-L	REAR DRIVE AXLE LB FOR REAR UPRIGHT - LOWER POSITION
325341-L	REAR ADJUSTABLE DRIVE AXLE LB FOR REAR UPRIGHT - LOWER POSITION
325390	ALU SHIM 10x12x2MM (2)
325391	ALU SHIM 10x12x1MM (2)
326177	COMPOSITE BATTERY CLAMP (2)
326240	COMPOSITE FAN HOLDER
327210	FRONT SUSPENSION PIVOT PIN (2)
329901-H	2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE - HARD (10)
329901-Y	2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX IFMAR - YELLOW - HARD (10)
329913-H	2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE - HARD (2)
329913-Y	2WD/4WD REAR WHEEL AERODISK WITH 12MM HEX IFMAR - YELLOW - HARD (2)
332540	ALU SERVO SAVER ADJUSTABLE NUT
332561	SERVO SAVER SPRING C=14
335030	DIFF BEVEL & SATELLITE GEARS (2+4)
335031	DIFF BEVEL & SATELLITE GEARS FOR O-RINGS - SET
335080	DIFF PIN (2)
335081	ALU DIFF PIN - HARD COATED (2)
342360	ALU SHIM 3x8.8x1.0MM (10)
352460	PIVOT BALL 5.8 (10)
352610	ADJ. TURNBUCKLE M3 L/R 45MM - SPRING STEEL - V3 (2)
353561	ALU REAR WING SHIM (2)
355180	ACTIVE DIFF PIN (2)
356200	BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET
359050	BALL-BEARING 5x10x4 STEEL SEALED - GREASE - V2 (2)
359051	BALL-BEARING 5x12x4 STEEL SEALED - GREASE (2)
360901	ALU STEERING BLOCKS & 7° C-HUBS - LIGHTWEIGHT - SET
361116	XB4‘26 ALU CHASSIS 2.0MM - SWISS 7075 T6
361158	CARBON CENTER SLIPPER UPPER DECK - EXTRA LOW BULKHEAD
361177	CARBON CENTER DIFFERENTIAL UPPER DECK - EXTRA LOW BULKHEAD
361189	CARBON REAR BODY POST HOLDER
361190	CARBON CHASSIS BRACE DECK - REAR
361192	CARBON CHASSIS T-BRACE - REAR
361202	COMPOSITE FRONT BUMPER ALIGNED WITH CHASSIS
361278-G	COMPOSITE CHASSIS SIDE GUARDS L+R - NARROW FRONT - V3 - GRAPHITE
361278-H	COMPOSITE CHASSIS SIDE GUARDS L+R - NARROW FRONT - V3 - HARD
361278-M	COMPOSITE CHASSIS SIDE GUARDS L+R - NARROW FRONT - V3 - MEDIUM
361287-G	COMPOSITE CHASSIS BRACE FRONT & REAR - NARROW - GRAPHITE
361287-H	COMPOSITE CHASSIS BRACE FRONT & REAR - NARROW - HARD
361287-M	COMPOSITE CHASSIS BRACE FRONT & REAR - NARROW - MEDIUM
361288	XB4 CARBON CHASSIS WIRE COVER
361289	XB4 CARBON CHASSIS T-BRACE - FRONT
361320	BODY MOUNT, BATTERY MOUNT - V2 & WING SHIM (2)
361321	BODY MOUNT - SHORT + SHIMS - SET
361322	BODY MOUNT - EXTRA-SHORT
362006-C	DIFF BULKHEAD HORIZONTAL SPLIT DESIGN FOR COLLAR - F/R - SET
362091	CARBON SHOCK TOWER HS BULKHEAD FOR WING – 2 DOTS - FRONT
362112	COMPOSITE SUSPENSION ARM FRONT LOWER - MEDIUM
362112-G	COMPOSITE SUSPENSION ARM FRONT LOWER - GRAPHITE
362112-H	COMPOSITE SUSPENSION ARM FRONT LOWER - HARD
362113-G	COMPOSITE LONG SUSPENSION ARM FRONT LOWER - GRAPHITE
362113-H	COMPOSITE LONG SUSPENSION ARM FRONT LOWER - HARD
362210	COMPOSITE C-HUB 9° DEG. RIGHT
362210-G	COMPOSITE C-HUB 9° DEG. RIGHT - GRAPHITE
362210-H	COMPOSITE C-HUB 9° DEG. RIGHT - HARD
362211	COMPOSITE C-HUB 6° DEG. RIGHT
362211-G	COMPOSITE C-HUB 6° DEG. RIGHT - GRAPHITE
362220	COMPOSITE C-HUB 9° DEG. LEFT
362220-G	COMPOSITE C-HUB 9° DEG. LEFT - GRAPHITE
362220-H	COMPOSITE C-HUB 9° DEG. LEFT - HARD
362221	COMPOSITE C-HUB 6° DEG. LEFT
362221-G	COMPOSITE C-HUB 6° DEG. LEFT - GRAPHITE
362232	ALU C-HUB 7° RIGHT - SWISS 7075 T6
362233	ALU C-HUB 7° RIGHT - LIGHTWEIGHT - SWISS 7075 T6
362234	ALU C-HUB 12° RIGHT - SWISS 7075 T6
362242	ALU C-HUB 7° LEFT - SWISS 7075 T6
362243	ALU C-HUB 7° LEFT - LIGHTWEIGHT - SWISS 7075 T6
362244	ALU C-HUB 12° LEFT - SWISS 7075 T6
362250	COMPOSITE STEERING BLOCK - MEDIUM - V2
362250-G	COMPOSITE STEERING BLOCK - GRAPHITE
362250-H	COMPOSITE STEERING BLOCK - HARD
362251-G	COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - GRAPHITE
362251-M	COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - MEDIUM
362260	ALU STEERING BLOCK - SWISS 7075 T6
362261	ALU STEERING BLOCK - LIGHTWEIGHT - SWISS 7075 T6
362270	CARBON EXTENSION FOR STEERING BLOCK (1+1) - 2 DOTS
362272	CARBON EXTENSION FOR ALU STEERING BLOCK (1+1) - 1 SLOT
362274	CARBON EXTENSION FOR STEERING BLOCK (1+1) - 1 DOT
362275	CARBON EXTENSION FOR STEERING BLOCK (1+1) - 3 DOTS
362280	ALU CONICAL SHIM 3x6x2.0MM (10)
362280-K	ALU CONICAL SHIM 3x6x2.0MM - BLACK (10)
362280-O	ALU CONICAL SHIM 3x6x2.0MM - ORANGE (10)
362290	STEEL STEERING BUSHING - SHORT (2)
362291	STEEL STEERING BUSHING - LONG (2)
362313	ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - FRONT-FRONT
362314	ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-FRONT
362315	CLOSED ECCENTRIC BUSHING SET (2)
362316	OPEN ECCENTRIC BUSHING SET (2)
362323	ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - FRONT-REAR
362324	ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-REAR
362370	COMPOSITE INLINE HUB FOR BEVEL DRIVE GEAR - REAR HS BULKHEAD - 1+2+3 DOTS
362371	COMPOSITE ANGLED HUB FOR BEVEL DRIVE GEAR - FRONT HS BULKHEAD - 1 DOT
362372	COMPOSITE ANGLED HUB FOR BEVEL DRIVE GEAR - FRONT HS BULKHEAD - 2 DOTS
362373	COMPOSITE ANGLED HUB FOR BEVEL DRIVE GEAR - FRONT HS BULKHEAD - 3 DOTS
362390	ALU REAR SHOCK ABSORBER ADAPTER (1+1) - SET
362481	ANTI-ROLL BAR - SHORT - 1.1MM
362482	ANTI-ROLL BAR - SHORT - 1.2MM
362483	ANTI-ROLL BAR - SHORT - 1.3MM
362484	ANTI-ROLL BAR - SHORT - 1.4MM
362486	ANTI-ROLL BAR - SHORT - 1.6MM
362488	ANTI-ROLL BAR - SHORT - 1.8MM
362489	ANTI-ROLL BAR - SHORT - 2.0MM
362512	COMPOSITE SERVO SAVER FOR BALL-BEARINGS
362512-G	COMPOSITE SERVO SAVER FOR BALL-BEARINGS - GRAPHITE
362540	ALU SERVO SAVER MAIN SHAFT
362550	SERVO SAVER PIVOT SHAFT (2)
362552	SERVO SAVER PIVOT SHAFT +5MM (2)
362560	ADJUSTABLE MULTI-FLEX STEERING SYSTEM BRACE - SET
362571	COMPOSITE STEERING PLATE
362571-G	COMPOSITE STEERING PLATE - GRAPHITE
362575	ALU STEERING PLATE 2-H. - 6MM PROFILED SHAPE - SWISS 7075 T6
362581	CARBON STEERING BRACE
362649	BALL END 4.9MM WITH 5MM THREAD (2)
362650	BALL END 4.9MM WITH 6MM THREAD (2)
362651	BALL END 4.9MM WITH 8MM THREAD (2)
362652	BALL END 4.9MM WITH 10MM THREAD (2)
362656	HARD STEEL BALL END 5.4MM WITH 6MM THREAD - NICKEL COATED (2)
362658	HARD STEEL BALL END 5.4MM WITH 8MM THREAD - NICKEL COATED (2)
362660	HARD STEEL BALL END 5.4MM WITH 10MM THREAD - NICKEL COATED (2)
363088	CARBON SHOCK TOWER FOR HS BULKHEAD - 3 DOTS - REAR
363089	CARBON SHOCK TOWER FOR HS BULKHEAD - 5 DOTS - REAR
363112-H	COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - HARD
363112-M	COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - MEDIUM
363113-G	COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE
363113-H	COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - HARD
363113-M	COMPOSITE LONG SUSPENSION ARM REAR LOWER RIGHT - MEDIUM
363114-G	COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - GRAPHITE
363114-H	COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - HARD
363114-M	COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - MEDIUM
363122-H	COMPOSITE SUSPENSION ARM REAR LOWER LEFT - HARD
363122-M	COMPOSITE SUSPENSION ARM REAR LOWER LEFT - MEDIUM
363123-G	COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - GRAPHITE
363123-H	COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - HARD
363123-M	COMPOSITE LONG SUSPENSION ARM REAR LOWER LEFT - MEDIUM
363124-G	COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - GRAPHITE
363124-H	COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - HARD
363124-M	COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - MEDIUM
363241	BALL UNIVERSAL 5.75MM WITH BACKSTOP (2)
363242	PIVOT BALL 5.8MM ECCENTRIC (2)
363300	ALU REAR SUSPENSION HOLDERS - EXTRA HIGH ROLL CENTERS - SET
363316	ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-FRONT
363317	ALU LOWER SUSP. HOLDER WIDE FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-FRONT
363325	ALU LOWER SUSP. HOLDER FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-REAR
363326	ALU LOWER SUSP. HOLDER WIDE FOR HORIZONTAL SPLIT BULKHEAD (HS) - REAR-REAR
363510	LEXAN REAR WING (2)
363511	LEXAN REAR WING - THICK (2)
363512	LEXAN REAR WING - EXTRA THICK (2)
363519	LEXAN FRONT WING
363520	REAR WING POST - V2 (2)
364015	ALU MOTOR BULKHEAD - EXTRA LOW
364026	COMPOSITE CENTER DIFFERENTIAL BULKHEAD - EXTRA LOW
364027	ALU CENTER SLIPPER BULKHEAD - EXTRA LOW - SWISS 7075 T6
364028	ALU CENTER DIFFERENTIAL BULKHEAD - EXTRA LOW - SWISS 7075 T6
364091	ALU ECCENTRIC INSERT FOR NARROW MOTOR BULKHEAD
364101-S	ONE-WAY SLIPPER CLUTCH SET - LIGHTWEIGHT & SHORT
364102	XB4 SOLID AXLE - SLIPPER ELIMINATOR - SET
364124	ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - FRONT - SWISS 7075 T6
364125	ALU PLATE FOR ONE-WAY SLIPPER CLUTCH FOR OUTDRIVE - SWISS 7075 T6
364126	ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6
364130-L	ALU ONE-WAY SLIPPER CLUTCH PLATES - VENTILATED - SET
364131	SLIPPER CLUTCH PAD SLS - SOFT (3)
364132	SLIPPER CLUTCH PAD BLACK - MEDIUM (2)
364133	SLIPPER CLUTCH ONE-WAY OUTDRIVE PAD SLS - SOFT (2)
364151	STEEL BUSHING FOR ONE-WAY SLIPPER CLUTCH
364175-L	OUTDRIVE ADAPTER WITH PRESSED ONE-WAY BEARING - LIGHTWEIGHT
364183	SLIPPER CLUTCH SPRING C=50 - BLACK
364192	ALU NUT FOR ONE-WAY SLIPPER CLUTCH
364903-L	GEAR DIFFERENTIAL - LIGHTWEIGHT - SET
364904-L	GEAR CENTER DIFFERENTIAL - LIGHTWEIGHT - SET
364912	COMPOSITE GEAR DIFFERENTIAL CASE - LARGE VOLUME
364912-G	COMPOSITE GEAR DIFFERENTIAL CASE - LARGE VOLUME - GRAPHITE
364913	COMPOSITE CENTER GEAR DIFFERENTIAL ADAPTER - LARGE VOLUME
364920	COMPOSITE GEAR DIFFERENTIAL COVER - LARGE VOLUME
364920-G	COMPOSITE GEAR DIFFERENTIAL COVER - LARGE VOLUME - GRAPHITE
364940	STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 40T
364941	STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 41T
364962-L	GEAR DIFF OUTDRIVE ADAPTER - LIGHTWEIGHT (2)
364966	CENTER GEAR DIFF OUTDRIVE ADAPTER - LIGHTWEIGHT (1+1)
364975	COMPOSITE CENTER DIFF SPUR GEAR 75T / 48
364978	COMPOSITE CENTER DIFF SPUR GEAR 78T / 48
364981	COMPOSITE CENTER DIFF SPUR GEAR 81T / 48
365100	XRAY XB4 ACTIVE DIFFERENTIAL - FRONT/REAR - SET
365101	XRAY XB4 ACTIVE DIFFERENTIAL - CENTER - SET
365127	STEEL BEVEL DRIVE GEAR - FOR HORIZONTAL SPLIT BULKHEAD (HS) - 16T
365351	ALU WHEEL HUB 14MM - OFFSET -0.75MM (2)
365353	ALU WHEEL HUB 12MM - O SLOTS - V2 (2)
365354	ALU WHEEL HUB 12MM - LIGHTWEIGHT - OFFSET -0.75MM (2)
365355	ALU WHEEL HUB 12MM - 1 SLOT - OFFSET +0.75MM (2)
365356	ALU WHEEL HUB 12MM - 2 SLOTS - OFFSET +1.50MM (2)
365357	ALU WHEEL HUB 12MM - 3 SLOTS - OFFSET +2.25MM (2)
365358	ALU WHEEL HUB 12MM - 4 SLOTS - OFFSET +3.00MM (2)
365359	ALU WHEEL HUB 12MM - 5 SLOTS - OFFSET +3.75MM (2)
365360	ALU WHEEL HUB 12MM - 6 SLOTS - OFFSET +4.5MM (2)
365361	ALU WHEEL HUB 12MM - LIGHTWEIGHT - OFFSET -1.25MM (2)
365470	COMPOSITE DRIVE SHAFT SAFETY COLLAR - V2 (3)
365471-K	ALU DRIVE SHAFT SAFETY COLLAR - BLACK (3)
365471-O	ALU DRIVE SHAFT SAFETY COLLAR - ORANGE (3)
365726	ALU PINION GEAR - HARD COATED 26T / 48
365727	ALU PINION GEAR - HARD COATED 27T / 48
365728	ALU PINION GEAR - HARD COATED 28T / 48
365729	ALU PINION GEAR - HARD COATED 29T / 48
365730	ALU PINION GEAR - HARD COATED 30T / 48
365731	ALU PINION GEAR - HARD COATED 31T / 48
365732	ALU PINION GEAR - HARD COATED 32T / 48
365733	ALU PINION GEAR - HARD COATED 33T / 48
365734	ALU PINION GEAR - HARD COATED 34T / 48
365735	ALU PINION GEAR - HARD COATED 35T / 48
365736	ALU PINION GEAR - HARD COATED 36T / 48
365737	ALU PINION GEAR - HARD COATED 37T / 48
365738	ALU PINION GEAR - HARD COATED 38T / 48
365872	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 72T / 48
365875	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 75T / 48
365878	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 78T / 48
365881	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48
365884	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 84T / 48
365887	COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 87T / 48
366011	ALU BRACE MOUNT - SWISS 7075 T6 (2)
366053	CARBON PLATE FOR ELECTRONICS - SET
366054	COMPOSITE RADIO PLATE - SHORT
366143	COMPOSITE BATTERY HOLDER STAND - SHORT (2)
366161	SET OF O-RINGS (6x2, 6x3, 6x4, 6x5MM)
366204-K	ALU MONOBLOCK SERVO HOLDER - SWISS 7075 T6
366205	ALU SERVO MOUNT 22MM - BOTH SIDES THREADED
366231	CARBON SERVO HOLDER
366240	CARBON FAN HOLDER
367210	SUSPENSION PIVOT PIN (2)
367220	FRONT ARM PIVOT PIN (2)
367221	FRONT ARM PIVOT PIN (2)
368011	COMPOSITE SHOCK BALL JOINT +2MM & +4MM (2+2)
368014-S	COMPOSITE SHORT SHOCK CAP, SPRING COLLAR & BALL JOINT - BIG BORE (2)
368021	ALU SHOCK SPRING RETAINING COLLAR (4)
368022	ALU SHOCK SPRING RETAINING COLLAR -2MM (4)
368023	ALU SHOCK SPRING RETAINING COLLAR -4MM (4)
368024	COMPOSITE SPRING COLLAR -2MM & -4MM - BIG BORE (2+2)
368027	ALU SHOCK SPRING RETAINING COLLAR -6MM (4)
368028	COMPOSITE SPRING COLLAR 0MM & -6MM - BIG BORE (2+2)
368032	SHOCK PISTONS - COMPLETE SET - DELRIN - BIG BORE
368033	PRECISION GROUND SHOCK PISTON BLANKS 2.5MM - BIG BORE (4)
368034	PRECISION GROUND SHOCK PISTON BLANKS 2.0MM - BIG BORE (4)
368042	COMPOSITE SHOCK BUSHING & SHIM FOR ALU CAP (2+2)
368045	STEEL SHOCK STANDOFFS (2)
368045-T	XRAY TITANIUM SHOCK STANDOFFS (2)
368046-T	XRAY TITANIUM SHOCK STANDOFFS - LONG (2)
368049	ALU SHOCK ADJUSTABLE NUT - BIG BORE (2)
368054	ALU SHOCK CAP-NUT WITH VENT HOLE - BIG BORE (2)
368102-S	SHOCK ABSORBERS 30MM - SHORT CAP - BIG BORE - SET (2)
368123	ALU SHOCK BODY 30MM - BIG BORE (2)
368140	ALU LOWER SHOCK BODY CAP (2)
368162	HARDENED SHOCK SHAFT 40MM (2)
368202-S	SHOCK ABSORBERS 35.5MM - SHORT CAP - BIG BORE - SET (2)
368224	ALU SHOCK BODY 35.5MM - BIG BORE (2)
368263	HARDENED SHOCK SHAFT 45MM (2)
368381	FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 1 DOT (2)
368382	FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 2 DOTS (2)
368383	FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 3 DOTS (2)
368384	FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 4 DOTS (2)
368385	FRONT BIG BORE CONICAL SPRING-SET L=42.5MM - 5 DOTS (2)
368481	REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 1 DOT (2)
368482	REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 2 DOTS (2)
368483	REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 3 DOTS (2)
368484	REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 4 DOTS (2)
368485	REAR BIG BORE CONICAL SPRING-SET L=57.5MM - 5 DOTS (2)
369712	BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4C
369713	BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4C - LIGHT
369714	BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4D
369715	BODY FOR 1/10 4WD OFF-ROAD BUGGY - DELTA 4D - LIGHT
369716	BODY FOR 1/10 4WD OFF-ROAD BUGGY - EPSILON 4D
369717	BODY FOR 1/10 4WD OFF-ROAD BUGGY - EPSILON 4D - LIGHT
369902-H	4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE - HARD (10)
369902-Y	4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - YELLOW - HARD (10)
369912-H	4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE - HARD (2)
369912-Y	4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - YELLOW - HARD (2)
397311	XRAY STICKER FOR BODY - WHITE
397312	XRAY STICKER FOR BODY - METALIC SILVER
397313	XRAY STICKER FOR BODY - PURPLE
397314	XRAY STICKER FOR BODY - NEON RED
397315	XRAY STICKER FOR BODY - NEON YELLOW
397316	XRAY STICKER FOR BODY - NEON ORANGE
397320	XRAY STICKERS FOR BODY - 5 DIFFERENT COLORS
397380	XRAY XB4 STICKER FOR BODY - WHITE

Screws, bearings, o-rings and hardware (61)

Part #	Description
901302	HEX SCREW SB M3x2.5 (10)
901304	HEX SCREW SB M3x4 (10)
901306	HEX SCREW SB M3x6 (10)
901308	HEX SCREW SB M3x8 (10)
901318	HEX SCREW SB M3x18 (10)
902205	HEX SCREW SH M2x5 (10)
902254	HEX SCREW SH M2.5x4 (10)
902255	HEX SCREW SH M2.5x5 (10)
902305	HEX SCREW SH M3x5 (10)
902306	HEX SCREW SH M3x6 (10)
902308	HEX SCREW SH M3x8 (10)
902310	HEX SCREW SH M3x10 (10)
902312	HEX SCREW SH M3x12 (10)
902314	HEX SCREW SH M3x14 (10)
902316	HEX SCREW SH M3x16 (10)
902322	HEX SCREW SH M3x22 (10)
903258	HEX SCREW SFH M2.5x8 (10)
903306	HEX SCREW SFH M3x6 (10)
903308	HEX SCREW SFH M3x8 (10)
903310	HEX SCREW SFH M3x10 (10)
903312	HEX SCREW SFH M3x12 (10)
908203	HEX SCREW SOCKET HEAD CAP M2x3 (10)
930126	CARBIDE BALL-BEARING AXIAL 2.6x6x1
930306	BALL-BEARING 3x6x2.5 STEEL SEALED - OIL (2)
930508	BALL-BEARING 5x8x2.5 STEEL SEALED - OIL (2)
930815	BALL-BEARING 8x14x4 STEEL SEALED - OIL (2)
931218	BALL-BEARING 12x18x4 STEEL SEALED - OIL (2)
940508	BALL-BEARING 5x8x2.5 RUBBER SEALED - OIL (2)
940510	BALL-BEARING 5x10x4 RUBBER SEALED - OIL (2)
940512	BALL-BEARING 5x12x4 RUBBER SEALED - OIL (2)
940513	BALL-BEARING 5x12x4 RUBBER SEALED - GREASE (2)
940814	BALL-BEARING 8x14x4 RUBBER SEALED - GREASE (2)
940815	BALL-BEARING 8x14x4 RUBBER SEALED - OIL (2)
941014	BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)
941015	BALL-BEARING 10x15x4 RUBBER SEALED - OIL (2)
941218	BALL-BEARING 12x18x4 RUBBER SEALED - OIL (2)
960030	NUT M3 (10)
960031	ALU NUT M3 (10)
960240	NUT M4 WITH SERRATED FLANGE (10)
961025	WASHER S 2.5 (10)
961032	WASHER S 3.2 (10)
962031	WASHER S 3x6x0.1 (10)
962032	WASHER S 3x6x0.2 (10)
962034	WASHER S 3x4.7x1 (10)
962100	WASHER S 10x12x0.1 (10)
964031	WASHER S 3.5x10x0.2 (10)
964033	WASHER S 3.5x10x0.3 (10)
964050	WASHER S 5x15x0.3 (10)
965023	E-CLIP 2.3 (10)
970080	O-RING 8x1 (10)
970100	O-RING 10 x 1.5 (10)
970131	O-RING 13 x 1.0 (10)
970150	O-RING 15 x 1.5 (10)
971032	SILICONE O-RING 3.2x0.8 (10)
971050	SILICONE O-RING 5x1.5 (10)
972030	SILICONE O-RING 3x2 (10)
973030	SILICONE X-RING PRE-OILED 3x2 (8)
980209	PIN 2x8.8 (10)
980210	PIN 2x9.8 (10)
981208	PIN 2x8 (10)
981210	PIN 2x10 (10)

Tools, oils and setup equipment (348)

Part #	Description
101600	HUDY STEEL MINI CLAMP – EXTRA HARD STEEL
102580	HUDY PROFESSIONAL ALU SANDING DRUM WITH P120 GRAIN - MEDIUM
102590	SANDING DRUM - P080 GRAIN - COARSE
102591	SANDING DRUM - P120 GRAIN - MEDIUM
102592	SANDING DRUM - P180 GRAIN - FINE
102593	SANDING DRUM - P240 GRAIN - ULTRA-FINE
104004	HUDY AIR VAC - VACUUM PUMP - 1/10 OFF-ROAD
105250	HUDY TIRE MOUNTING BAND - SMALL - PURPLE (4)
105250-K	HUDY TIRE MOUNTING BAND - SMALL - BLACK (4)
105500	HUDY UNIVERSAL TIRE BALANCING STATION
105525	WHEEL ADAPTER FOR 1/10 OFF-ROAD CAR - 14MM
105590	HUDY WHEEL BALANCING PUTTY
106000	HUDY DRIVE PIN REPLACEMENT TOOL (FOR 3MM PINS)
106036	EJECTOR PIVOT PIN & ALTERNATING PIVOT 2.5MM FOR #106000
106053	HUDY SET OF REPLACEMENT DRIVE SHAFT PINS 2.5x10 (10)
106200	HUDY MAGIC CLEANING GUM
106205	HUDY WASH BOX
106210	HUDY GRAPHITE GREASE
106211	HUDY DIFF GREASE
106212	HUDY SUPER DIFF GREASE
106213	HUDY JOINT GREASE
106230	HUDY BEARING OIL
106281	HUDY BODY FIX 28g/1oz
106290	HUDY ULTIMATE SOLDER 3M LENGTH
106310	HUDY PREMIUM SILICONE OIL 100 cSt - 50ML
106311	HUDY PREMIUM SILICONE OIL 100 cSt - 100ML
106315	HUDY PREMIUM SILICONE OIL 150 cSt - 50ML
106316	HUDY PREMIUM SILICONE OIL 150 cSt - 100ML
106320	HUDY PREMIUM SILICONE OIL 200 cSt - 50ML
106321	HUDY PREMIUM SILICONE OIL 200 cSt - 100ML
106325	HUDY PREMIUM SILICONE OIL 250 cSt - 50ML
106326	HUDY PREMIUM SILICONE OIL 250 cSt - 100ML
106330	HUDY ULTIMATE SILICONE OIL 300 cSt - 50ML
106331	HUDY PREMIUM SILICONE OIL 300 cSt - 100ML
106335	HUDY ULTIMATE SILICONE OIL 350 cSt - 50ML
106336	HUDY PREMIUM SILICONE OIL 350 cSt - 100ML
106337	HUDY PREMIUM SILICONE OIL 375 cSt - 50ML
106338	HUDY PREMIUM SILICONE OIL 375 cSt - 100ML
106340	HUDY PREMIUM SILICONE OIL 400 cSt - 50ML
106341	HUDY PREMIUM SILICONE OIL 400 cSt - 100ML
106342	HUDY PREMIUM SILICONE OIL 425 cSt - 50ML
106343	HUDY PREMIUM SILICONE OIL 425 cSt - 100ML
106345	HUDY PREMIUM SILICONE OIL 450 cSt - 50ML
106346	HUDY PREMIUM SILICONE OIL 450 cSt - 100ML
106347	HUDY PREMIUM SILICONE OIL 475 cSt - 50ML
106348	HUDY PREMIUM SILICONE OIL 475 cSt - 100ML
106350	HUDY PREMIUM SILICONE OIL 500 cSt - 50ML
106351	HUDY PREMIUM SILICONE OIL 500 cSt - 100ML
106352	HUDY PREMIUM SILICONE OIL 525 cSt - 50ML
106353	HUDY PREMIUM SILICONE OIL 525 cSt - 100ML
106355	HUDY PREMIUM SILICONE OIL 550 cSt - 50ML
106356	HUDY PREMIUM SILICONE OIL 550 cSt - 100ML
106357	HUDY PREMIUM SILICONE OIL 575 cSt - 50ML
106358	HUDY PREMIUM SILICONE OIL 575 cSt - 100ML
106360	HUDY PREMIUM SILICONE OIL 600 cSt - 50ML
106361	HUDY PREMIUM SILICONE OIL 600 cSt - 100ML
106362	HUDY PREMIUM SILICONE OIL 625 cSt - 50ML
106363	HUDY PREMIUM SILICONE OIL 625 cSt - 100ML
106365	HUDY PREMIUM SILICONE OIL 650 cSt - 50ML
106366	HUDY PREMIUM SILICONE OIL 650 cSt - 100ML
106367	HUDY PREMIUM SILICONE OIL 675 cSt - 50ML
106368	HUDY PREMIUM SILICONE OIL 675 cSt - 100ML
106370	HUDY PREMIUM SILICONE OIL 700 cSt - 50ML
106375	HUDY PREMIUM SILICONE OIL 750 cSt - 50ML
106380	HUDY PREMIUM SILICONE OIL 800 cSt - 50ML
106390	HUDY PREMIUM SILICONE OIL 900 cSt - 50ML
106410	HUDY PREMIUM SILICONE OIL 1000 cSt - 50ML
106420	HUDY PREMIUM SILICONE OIL 2000 cSt - 50ML
106430	HUDY PREMIUM SILICONE OIL 3000 cSt - 50ML
106440	HUDY PREMIUM SILICONE OIL 4000 cSt - 50ML
106450	HUDY PREMIUM SILICONE OIL 5000 cSt - 50ML
106460	HUDY PREMIUM SILICONE OIL 6000 cSt - 50ML
106470	HUDY PREMIUM SILICONE OIL 7000 cSt - 50ML
106480	HUDY PREMIUM SILICONE OIL 8000 cSt - 50ML
106490	HUDY PREMIUM SILICONE OIL 9000 cSt - 50ML
106492	HUDY PREMIUM SILICONE OIL 11 000 cSt - 50ML
106510	HUDY ULTIMATE SILICONE OIL 10 000 cSt - 50ML
106512	HUDY PREMIUM SILICONE OIL 12 000 cSt - 50ML
106515	HUDY PREMIUM SILICONE OIL 15 000 cSt - 50ML
106517	HUDY PREMIUM SILICONE OIL 17 000 cSt - 50ML
106520	HUDY PREMIUM SILICONE OIL 20 000 cSt - 50ML
106530	HUDY ULTIMATE SILICONE OIL 30 000 cSt - 50ML
106540	HUDY ULTIMATE SILICONE OIL 40 000 cSt - 50ML
106550	HUDY PREMIUM SILICONE OIL 50 000 cSt - 50ML
106560	HUDY PREMIUM SILICONE OIL 60 000 cSt - 50ML
106580	HUDY PREMIUM SILICONE OIL 80 000 cSt - 50ML
106610	HUDY ULTIMATE SILICONE OIL 100 000 cSt - 50ML
106615	HUDY PREMIUM SILICONE OIL 150 000 cSt - 50ML
106620	HUDY PREMIUM SILICONE OIL 200 000 cSt - 50ML
106630	HUDY PREMIUM SILICONE OIL 300 000 cSt - 50ML
106650	HUDY PREMIUM SILICONE OIL 500 000 cSt - 50ML
106692	HUDY PREMIUM SILICONE OIL 1 000 000 cSt - 50ML
106694	HUDY PREMIUM SILICONE OIL 2 000 000 cSt - 50ML
106900	HUDY OIL BOTTLE, NOSE, STEEL NEEDLE & SAFETY LOCK - 5ML (3)
107090	HUDY BEARING CHECK TOOL
107602	LIMITED EDITION - REAMER FOR BODY + COVER - LARGE
107643	LIMITED EDITION - ARM REAMER 3.0 MM
107701	CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8 - LW (2)
107720	CHASSIS RIDE HEIGHT GAUGE 17MM TO 30MM FOR 1/8 & 1/10 OFF-ROAD
107740	HUDY RIDE HEIGHT TOOL 14-20MM
107742	HUDY RIDE HEIGHT TOOL 20-30MM
107751	HUDY QUICK CAMBER GAUGE 1/8 OFF-ROAD 1°; 2°; 3°
107761	HUDY ADJUSTABLE CAMBER GAUGE 80MM
107763	HUDY ADJUSTABLE RIDE HEIGHT GAUGE 5-40MM
107780	HUDY ADJUSTABLE DROOP GAUGE 80~140MM
107783	HUDY DROOP GAUGE 70~140MM
107839	HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.5”
107840	CLEANING BRUSH LARGE - SOFT
107841	CLEANING BRUSH LARGE - MEDIUM
107842	CLEANING BRUSH LARGE - STIFF
107843	HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.0”
107846	CLEANING BRUSH SMALL - SOFT
107847	CLEANING BRUSH SMALL - MEDIUM
107848	CLEANING BRUSH SMALL - STIFF
107850	HUDY PERSONAL RACING DISPLAY
107855	HUDY PIT LED
107861	HUDY PROFFESIONAL RACING STOPWATCH XL DISPLAY
107865	HUDY ULTIMATE DIGITAL SCALE 300g/0.01g
107866	HUDY PROFFESIONAL DIGITAL POCKET SCALE 3000g/0.1g
107870	HUDY FIBRE-REINFORCED TAPE - BLACK
107872	VELCRO TAPE WITH DOUBLE SIDED TAPE 8x500MM
107873	HUDY BUMPER & BODY SPACE SPONGE SET - 1.5, 3.0, 5.0MM
107875	HUDY ULTRA DOUBLE-SIDED TAPE
107876	HUDY ULTRA THIN DOUBLE-SIDED TAPE - SINGLE STRIP (5)
107880	CHASSIS BALANCING SIMPLE TOOL (2 PCS.)
108160	HUDY 1/10 OFF-ROAD CAR STAND
108190	HUDY ALU PARTS TRAY
108192	HUDY ALU PARTS TRAY NARROW 215x50mm
108193	HUDY ALU PARTS TRAY LARGE 215x100mm
108195	HUDY ALU PARTS TRAY COMPACT - MAGNETIC & ANTI-SLIP
108201	FLAT SET-UP BOARD FOR 1/10 TOURING CARS
108203	FLAT SET-UP BOARD FOR 1/10 TOURING CARS - SILVER GREY
108204	FLAT SET-UP BOARD FOR 1/10 TOURING CARS - TITAN
108205	FLAT SET-UP BOARD FOR 1/10 TOURING CARS - DARK GREY
108280	HUDY 10mm SET-UP BOARD LEVEL ADJUSTABLE FEET (4)
108601	FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - GREY
108602	FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - SILVER GREY
108603	FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - DARK GREY
108604	FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - TITAN
108605	FLAT SET-UP BOARD FOR 1/10 OFF-ROAD - LIGHTWEIGHT - BLACK
108660	PLASTIC SET-UP BOARD DECAL 331x386mm - 1/0 OFF-ROAD
108901	HUDY SET-UP STATION FOR 1/10 OFF-ROAD CARS
108951	SET-UP STATION & SET-UP TOOLS + CARRYING BAG FOR 1/10 OFF-ROAD CARS
108960	ALU NUT FOR 1/10 OFF-ROAD SET-UP SYSTEM (4)
108970	ALU SET-UP WHEEL FOR 1/10 OFF-ROAD (4)
109801	HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF & SHOCKS
109821	ALU SHOCK STAND FOR 1/10 OFF-ROAD
109840	HUDY ALU TRAY FOR 1/10 OFF-ROAD DIFF ASSEMBLY
109860	HUDY ALU TRAY FOR SET-UP SYSTEM
109880	HUDY ALU TRAY FOR ACCESSORIES & PIT LED
111063	LIMITED EDITION - UNIVERSAL HANDLE FOR EL. SCREWDRIVER PINS
111545	LIMITED EDITION - ALLEN WRENCH 1.5 MM
112045	LIMITED EDITION - ALLEN WRENCH 2.0 MM
170004	HUDY SHORT SOCKET WRENCH # 5.5MM
175535	LIMITED EDITION - SOCKET DRIVER 5.5 MM
177035	LIMITED EDITION - SOCKET DRIVER 7.0 MM
181030	HUDY SPRING STEEL TURNBUCKLE WRENCH 3MM
181031	ALU TURNBUCKLE WRENCH 3MM - SWISS 7075 T6
181035	HUDY SPRING STEEL TURNBUCKLE WRENCH 3.5MM
181036	ALU TURNBUCKLE WRENCH 3.5MM - SWISS 7075 T6
181090	HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS
181091	HUDY TURNBUCKLE WRENCH 3 & 4MM - V2
181110	HUDY BALL JOINT WRENCH
183011	HUDY PROFESSIONAL MULTI TOOL
188970	HUDY PROFESSIONAL TWEEZERS STRAIGHT
188971	HUDY PROFESSIONAL TWEEZERS CURVED
188980	HUDY BLADE HOBBY KNIFE WITH ALU HANDLE
188981	HUDY POCKET HOBBY KNIFE
188984	HUDY REPLACEABLE HOBBY KNIFE BLADES (10PCS)
188985	HUDY REPLACEABLE HOBBY KNIFE BLADES (5PCS)
188990	HUDY ULTIMATE BODY SCISSORS
190001	SET OF TOOLS + CARRYING BAG - FOR ELECTRIC TOURING CARS
190005	HUDY LIMITED EDITION TOOL SET + CARRYING BAG
190006	PT SET OF TOOLS + CARRYING BAG - FOR ALL CARS
190070	SET OF POWER TOOL TIPS 2.0, 2.5, 3.00MM + 4.0, 5.8 PHILLIPS
199011-H	HUDY HARD CASE - 230x180x45MM - TOOL BAG SMALL
199050	HUDY RC PLIERS BAG
199060	HUDY ALU TOOL STAND
199100	HUDY 1/10 TOURING CARRYING BAG + TOOL BAG - V2 - EXCLUSIVE EDITION
199110	HUDY 1/10 CARRYING BAG - COMPACT
199115	HUDY UNIVERSAL PADDED OPEN HAND BAG
199116	HUDY UNIVERSAL ZIPPED HAND BAG
199120	HUDY 1/10 & 1/8 CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION
199150	HUDY CARGO BAG - EXCLUSIVE EDITION
199155L	HUDY TRAVEL BAG - LARGE
199157L	HUDY HAND BAG - LARGE
199157M	HUDY HAND BAG - MEDIUM
199170	HUDY TRANSMITTER BAG - LARGE - EXCLUSIVE EDITION
199171	HUDY TRANSMITTER BAG - COMPACT - EXCLUSIVE EDITION
199171-H	HUDY HARD CASE - 185x220x145MM - TRANSMITTER SANWA MT44 & M17
199175	HUDY RADIO WINTER BAG - EXCLUSIVE EDITION
199176	HUDY HEAT PACK GEL
199183	HUDY CAR BAG - 1/10 OFF-ROAD
199187	HUDY CAR BAG - 1/10 CRAWLER
199190	HUDY TEAM RUCKSACK
199191	HUDY TEAM BACKPACK XL
199199	HUDY EURO POUCH
199211	HUDY SET-UP BOARD BAG 1/10 OFF-ROAD
199241	HUDY SET-UP BAG FOR 1/10 & 1/8 OFF-ROAD CARS & GT
199260	HUDY PIT LED BAG
199270	HUDY LIPO SAFETY BAG
199271	HUDY LIPO SAFETY BAG - COMPACT
199280L	HUDY OIL BAG - LARGE
199280L-H	HUDY HARD CASE - 180x140x120MM - OIL BAG LARGE
199280M	HUDY OIL BAG - MEDIUM
199280M-H	HUDY HARD CASE - 140x110x95MM - OIL BAG MEDIUM
199290	HUDY ACCESSORIES BAG
199290-H	HUDY HARD CASE - 235x190x75MM - ACCESSORIES / ENGINE BAG
199291-H	HUDY HARD CASE - 135x85x75MM - ACCESSORIES / AIR VAC ON-ROAD
199292-H	HUDY HARD CASE - 175x85x75MM - ACCESSORIES / AIR VAC 1/10 OFF-ROAD
199293-H	HUDY HARD CASE - 175x110x75MM - ACCESSORIES BAG MEDIUM
199294-H	HUDY HARD CASE - 215x90x85MM - ACCESSORIES / AIR VAC 1/8 OFF-ROAD
199295-H	HUDY HARD CASE - 280x150x85MM - ACCESSORIES BAG LARGE
199296-H	HUDY HARD CASE - 120x85x46MM - ACCESSORIES / STOP WATCH
199297-H	HUDY HARD CASE - 320x220x145MM - ELECTRONICS
199910	HUDY PIT MAT 750x1200MM
199911	HUDY PIT MAT ROLL 750x1200MM
199912	HUDY PIT MAT ROLL 600x950MM
199913L	HUDY PIT MAT FULL COLOR 650x1200MM
199913M	HUDY PIT MAT FULL COLOR 650x950MM
209065	HUDY COMPACT CLEANING TOWEL (10)
209073	HUDY EXCLUSIVE PIT TOWEL 1100 x 700
209200	HUDY CHASSIS PROTECTOR VINYL STICKER 360x125mm
209240	HUDY BODY POST HOLE PROTECTOR VINYL STICKER 7x16x0.5MM (8)
286990	HUDY FACE MASK
293010	HUDY STAINLESS STEEL BATTERY WEIGHT 50G
293011	HUDY STAINLESS STEEL BATTERY WEIGHT 35G
293081	HUDY PURE TUNGSTEN WEIGHT 5g
293082	HUDY PURE TUNGSTEN WEIGHT 10g
293083	HUDY PURE TUNGSTEN WEIGHT 15g
293085	HUDY PURE TUNGSTEN WEIGHT THIN ROUND 15mm WITH M3 - 10g
293086	HUDY PURE TUNGSTEN WEIGHT THIN - RECEIVER - 24.5x24.5MM - 15g
293087	HUDY PURE TUNGSTEN WEIGHT THIN - SPEEDO - 31x26MM - 20g
293100	HUDY ALU RC FAN 30MM - BOTTOM MOUNT 2 HOLE
293101	HUDY ALU RC FAN 30MM - SIDE MOUNT 2 HOLE
293102	HUDY ALU RC FAN 30MM - TOP/SIDE MOUNT 4 HOLE
293110	HUDY BRUSHLESS RC FAN 30MM - WITH EXTERNAL SOLDERING TABS
293112	HUDY BRUSHLESS RC FAN 30MM - WITH INTERNAL SOLDERING TABS
293211	HUDY ALU BULLET PLUG BLACK & RED WITH 5MM GOLDEN BULLETS - SET
293215	HUDY GOLDEN BULLET 5MM (10)
293561	HUDY ALU REAR WING SHIM (2)
293561-K	HUDY ALU REAR WING SHIM - BLACK (2)
293561-O	HUDY ALU REAR WING SHIM - ORANGE (2)
294018	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 18T / 48
294019	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 19T / 48
294021	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 21T / 48
294022	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 22T / 48
294023	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 23T / 48
294024	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 24T / 48
294025	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 25T / 48
294026	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 26T / 48
294033	HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 33T / 48
298010	HUDY HARDWARE BOX - DOUBLE-SIDED
298011	HUDY HARDWARE BOX - DOUBLE-SIDED - COMPACT
298012	HUDY PARTS BOX - 10-COMPARTMENTS
298013	HUDY SPRINGS BOX - 10-COMPARTMENTS
298014	HUDY PARTS BOX - 8-COMPARTMENTS
298015	HUDY PARTS CASE - 290 x 195mm
298016	HUDY TINY HARDWARE BOX - 4-COMPARTMENTS
298017	HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS
298018	HUDY TINY HARDWARE BOX - 8-COMPARTMENTS
298019	HUDY DIFF BOX - 8-COMPARTMENTS
298021	HUDY HARDWARE BOX - DOUBLE-SIDED - SMALL
298022	HUDY TINY HARDWARE BOX - 10-COMPARTMENTS
298025	HUDY PARTS CASE - 275 x 180mm
298100	HUDY TIN ROUND BOX 80x30MM
325327	REAR DRIVE SHAFT 77MM WITH 2.5MM PIN - HUDY SPRING STEEL™
325340	REAR DRIVE AXLE LB - HUDY SPRING STEEL™
325341	REAR ADJUSTABLE DRIVE AXLE LB - HUDY SPRING STEEL™
362624	ADJUSTABLE TURNBUCKLE 50MM M3.5 L/R - HUDY SPRING STEEL™ (2)
362625	ADJUSTABLE TURNBUCKLE 55MM M3.5 L/R - HUDY SPRING STEEL™ (2)
364117	ONE-WAY SLIPPER CLUTCH SHAFT - LIGHTWEIGHT & SHORT - HUDY SPRING STEEL“
364160	SCREW FOR ONE-WAY SLIPPER CLUTCH ADJUSTMENT - HUDY SPRING STEEL™
364176	SOLID AXLE OUTDRIVE ADAPTER - HUDY SPRING STEEL™
364962	GEAR DIFF OUTDRIVE ADAPTER FOR LARGE VOLUME DIFF - HUDY SPRING STEEL™ (2)
365203	ECS FRONT DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™ - SET
365226	FRONT DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™
365227	ECS DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™
365230	DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
365231	ECS DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
365240	FRONT DRIVE AXLE - HUDY SPRING STEEL™
365241	FRONT ECS DRIVE AXLE - HUDY SPRING STEEL™
365250	ECS DRIVE SHAFT CASE - HUDY SPRING STEEL™
365429	CENTRAL DOGBONE DRIVE SHAFT 50MM - HUDY SPRING STEEL™
365433	CENTRAL DRIVE SHAFT 113MM WITH 2.5MM PIN - HUDY SPRING STEEL™
365434	CENTRAL DOGBONE DRIVE SHAFT 47MM - HUDY SPRING STEEL™
365435	CENTRAL DOGBONE DRIVE SHAFT 117MM - HUDY SPRING STEEL™
365436	CENTRAL DOGBONE DRIVE SHAFT 65MM - HUDY SPRING STEEL™
365444	CENTRAL DOGBONE SHAFT UNIVERSAL JOINT - HUDY SPRING STEEL™
803230	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – WHITE (2)
803230-G	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – GREEN (2)
803230-O	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – ORANGE (2)
803230-Y	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – YELLOW (2)
803231	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – WHITE (10)
803231-G	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – GREEN (10)
803231-O	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – ORANGE (10)
803231-Y	HUDY 1/10 OFF-ROAD WHEEL - 4WD – FRONT – YELLOW (10)
803240	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – WHITE (2)
803240-G	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – GREEN (2)
803240-O	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – ORANGE (2)
803240-Y	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – YELLOW (2)
803241	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – WHITE (10)
803241-G	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – GREEN (10)
803241-O	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – ORANGE (10)
803241-Y	HUDY 1/10 OFF-ROAD WHEEL - 2WD/4WD – REAR – YELLOW (10)
814101	HUDY 1/10 OFF-ROAD TIRE 4WD FRONT CARPET - 101 (2)
814301D-M	HUDY 1/10 OFF-ROAD TIRE 4WD FRONT DIRT - 301 - MEDIUM (2)
814301D-S	HUDY 1/10 OFF-ROAD TIRE 4WD FRONT DIRT - 301 - SOFT (2)
814303D-S	HUDY 1/10 OFF-ROAD TIRE 4WD FRONT DIRT - 303 - SOFT (2)
816101	HUDY 1/10 OFF-ROAD TIRE 2WD/4WD REAR CARPET - 101 (2)
816301D-M	HUDY 1/10 OFF-ROAD TIRE 2WD/4WD REAR DIRT - 301 - MEDIUM (2)
816301D-S	HUDY 1/10 OFF-ROAD TIRE 2WD/4WD REAR DIRT - 301 - SOFT (2)
816303D-S	HUDY 1/10 OFF-ROAD TIRE 2WD/4WD REAR DIRT - 303 - SOFT (2)
834101F	HUDY 1/10 OFF-ROAD INSERT 4WD FRONT CARPET - FOAM (2)
834301F	HUDY 1/10 OFF-ROAD INSERT 4WD FRONT DIRT - FOAM (2)
834302C	HUDY 1/10 OFF-ROAD INSERT 4WD FRONT - CELL - BLACK (2)
836101F	HUDY 1/10 OFF-ROAD INSERT 2WD/4WD REAR CARPET - FOAM (2)
836301F	HUDY 1/10 OFF-ROAD INSERT 2WD/4WD REAR DIRT - FOAM (2)
836302C	HUDY 1/10 OFF-ROAD INSERT 2WD/4WD REAR - CELL - BLACK (2)
854101	HUDY 1/10 OFF-ROAD PRE-GLUED TIRE 4WD FRONT CARPET - 101 (2)
854303D-S	HUDY 1/10 OFF-ROAD PRE-GLUED TIRE 4WD FRONT DIRT - 303 - SOFT (2)
856101	HUDY 1/10 OFF-ROAD PRE-GLUED TIRE 2WD/4WD REAR CARPET - 101 (2)
856303D-S	HUDY 1/10 OFF-ROAD PRE-GLUED TIRE 2WD/4WD REAR DIRT - 303 - SOFT (2)
903305-T	HUDY TITANIUM FLAT HEAD SCREW M3x5 (10)
903306-T	HUDY TITANIUM FLAT HEAD SCREW M3x6 (10)
903308-T	HUDY TITANIUM FLAT HEAD SCREW M3x8 (10)
903310-T	HUDY TITANIUM FLAT HEAD SCREW M3x10 (10)
903312-T	HUDY TITANIUM FLAT HEAD SCREW M3x12 (10)
903316-T	HUDY TITANIUM FLAT HEAD SCREW M3x16 (4)
908305-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x5 (10)
908306-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x6 (10)
908308-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x8 (10)
908310-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x10 (10)
908312-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x12 (10)
908314-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x14 (4)
908316-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x16 (4)
908318-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x18 (4)
908320-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x20 (4)
908322-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x22 (4)
908325-T	HUDY TITANIUM SUPER-LOW HEAD SCREW CENTERING DIA M3x25 (4)
990006	HUDY TITAN BALL STUD D=4.9 / L=6 / S=3.5 / 2mm HEX (2)
990008	HUDY TITAN BALL STUD D=4.9 / L=8 / S=3.5 / 2mm HEX (2)
990010	HUDY TITAN BALL STUD D=4.9 / L=10 / S=3.5 / 2mm HEX (2)
990014	HUDY TITANIUM BALL STUD D=5.4 / L=4 / S=4.5 / 2MM HEX (2)
990016	HUDY TITANIUM BALL STUD D=5.4 / L=6 / S=4.5 / 2MM HEX (2)
990018	HUDY TITANIUM BALL STUD D=5.4 / L=8 / S=4.5 / 2MM HEX (2)
990020	HUDY TITANIUM BALL STUD D=5.4 / L=10 / S=4.5 / 2MM HEX (2)
992345	HUDY ADJUSTABLE TURNBUCKLE 45MM M3 L/R - TITANIUM (2)