| 293080 | LEAD WEIGHTS 4x5g & 4x10g WITH 3M GLUE |
| 293084 | PRECISION BALANCING CHASSIS WEIGHT 10g (4) |
| 293407 | ALU CLAMP SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T |
| 293408 | ALU CLAMP SERVO HORN - HITEC - 24T |
| 293409 | ALU CLAMP SERVO HORN - FUTABA - 25T |
| 293444 | ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE - 23T |
| 293445 | ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE - 24T |
| 293446 | ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - 2-HOLE - 25T |
| 293447 | ALU CLAMP THROTTLE SERVO HORN - KO PROPO, SANWA - 2-HOLE - 23T |
| 293448 | ALU CLAMP THROTTLE SERVO HORN - HITEC - 2-HOLE - 24T |
| 293449 | ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - 2-HOLE - 25T |
| 293501 | ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T |
| 293502 | ALU SERVO HORN - HITEC - 24T |
| 293503 | ALU SERVO HORN - FUTABA - 25T - V2 |
| 293504 | ALU THROTTLE SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - 23T |
| 293505 | ALU THROTTLE SERVO HORN - HITEC - 24T |
| 293506 | ALU THROTTLE SERVO HORN - FUTABA - 25T - V2 |
| 293507 | ALU THROTTLE SERVO HORN - KO PROPO,JR,SANWA,AIRTR.- 23T (M3 THREAD) |
| 293508 | ALU THROTTLE SERVO HORN - HITEC - 24T (M3 THREAD) |
| 293509 | ALU THROTTLE SERVO HORN - FUTABA - 25T (M3 THREAD) - V2 |
| 293540 | AIR FILTER FOAM & OIL - XRAY XB808 LOW PROFILE (10) |
| 296509 | ALU COUNTERSUNK SERVO SHIM (10) |
| 296509-K | ALU COUNTERSUNK SERVO SHIM - BLACK (10) |
| 296509-O | ALU COUNTERSUNK SERVO SHIM - ORANGE (10) |
| 296510 | ALU COUNTERSUNK SHIM (10) |
| 296510-B | ALU COUNTERSUNK SHIM - BLUE (10) |
| 296510-K | ALU COUNTERSUNK SHIM - BLACK (10) |
| 296510-O | ALU COUNTERSUNK SHIM - ORANGE (10) |
| 296510-V | ALU COUNTERSUNK SHIM - VIOLET (10) |
| 296530-B | ALU NUT M3 - BLUE (10) |
| 296530-K | ALU NUT M3 - BLACK (10) |
| 296530-O | ALU NUT M3 - ORANGE (10) |
| 296540-B | ALU NUT M4 - BLUE (10) |
| 296540-K | ALU NUT M4 - BLACK (10) |
| 296540-O | ALU NUT M4 - ORANGE (10) |
| 296541-B | ALU NUT M4 WITH SERRATED FLANGE - BLUE (4) |
| 296541-K | ALU NUT M4 WITH SERRATED FLANGE - BLACK (4) |
| 296541-O | ALU NUT M4 WITH SERRATED FLANGE - ORANGE (4) |
| 296541-V | ALU NUT M4 WITH SERRATED FLANGE - VIOLET (4) |
| 303114 (opens in new tab) | ALU SHIM 3x10x3.0MM (2) |
| 303122 | ALU SHIM 3x6x1.0MM (10) |
| 303122-K (opens in new tab) | ALU SHIM 3x6x1.0MM - BLACK (10) |
| 303122-O (opens in new tab) | ALU SHIM 3x6x1.0MM - ORANGE (10) |
| 303123 (opens in new tab) | ALU SHIM 3x6x2.0MM (10) |
| 303123-K | ALU SHIM 3x6x2.0MM - BLACK (10) |
| 303123-O (opens in new tab) | ALU SHIM 3x6x2.0MM - ORANGE (10) |
| 303124-K (opens in new tab) | ALU SHIM 3x6x2.5MM - BLACK (10) |
| 303125 (opens in new tab) | ALU SHIM 3x6x3.0MM (10) |
| 303125-K (opens in new tab) | ALU SHIM 3x6x3.0MM - BLACK (10) |
| 303125-O (opens in new tab) | ALU SHIM 3x6x3.0MM - ORANGE (10) |
| 303126 | ALU SHIM 3x6x5.0MM (10) |
| 303126-K (opens in new tab) | ALU SHIM 3x6x5.0MM - BLACK (10) |
| 303127 (opens in new tab) | ALU SHIM 3x6x4.0MM (10) |
| 303127-K (opens in new tab) | ALU SHIM 3x6x4.0MM - BLACK (10) |
| 303128 | ALU SHIM 3x6x6.0MM (10) |
| 303128-K (opens in new tab) | ALU SHIM 3x6x6.0MM - BLACK (10) |
| 303129 (opens in new tab) | COMPOSITE SET OF SHIMS 3x 3x6x1MM, 1x 3x6x2MM (2) |
| 306310 (opens in new tab) | ANTENNA (2) |
| 333450 (opens in new tab) | ANTI-ROLL BAR PIVOT BALL 5.8MM (2) |
| 333451 | ALU ANTI-ROLL BAR PIVOT BALL 5.8MM - SWISS 7075 T6 - HARD COATED (2) |
| 335581 | SPRING C=7.8 FOR GEAR BOX - MEDIUM - SILVER (2) |
| 338540 (opens in new tab) | FLYWHEEL COLLAR 7MM |
| 350910 | XRAY XB8 C-HUB FRONT SUSPENSION CONVERSION SET |
| 350912 (opens in new tab) | XRAY XB8 ALU REAR UPRIGHTS - MULTI-ADJUSTABLE - SET |
| 351159 | XB8 CHASSIS SIDE GUARD L+R |
| 351159-S (opens in new tab) | CHASSIS SIDE GUARD L+R - SOFT |
| 351194 (opens in new tab) | XB8‘26 ALU CHASSIS - SWISS 7075 T6 (3MM) |
| 351203 | COMPOSITE FRONT BUMPER FOR SEMI-SPLIT BULKHEAD |
| 351221 (opens in new tab) | XB8/XB8E STAINLESS STEEL CHASSIS PROTECTOR - FRONT |
| 351236 (opens in new tab) | XB8/XB8E STAINLESS STEEL CHASSIS PROTECTOR - REAR |
| 351301 (opens in new tab) | BODY POSTS |
| 351348 | XB8 CARBON UPPER PLATE |
| 351350 (opens in new tab) | COMPOSITE UPPER PLATE WITH TWO BRACE POSITIONS |
| 351351 (opens in new tab) | CARBON UPPER PLATE WITH TWO BRACE POSITIONS |
| 352009-C (opens in new tab) | XB8 SEMI-SPLIT DIFF BULKHEAD BLOCK SET FRONT/REAR FOR COLLAR |
| 352015 | XB8 GEARBOX PINION HEIGHT INSERT (1+1) |
| 352054 | XB8 ALU FRONT SHOCK TOWER FOR SEMI-SPLIT BULKHEAD (4MM) |
| 352055 (opens in new tab) | XB8 ALU FRONT SHOCK TOWER FOR SEMI-SPLIT BULKHEAD - LOWER |
| 352073 | XB8 GEARBOX DIFF HEIGHT INSERT (2+2) - V2 |
| 352084 | XB8 COMPOSITE FRONT BRACE |
| 352120 | XB8 COMPOSITE FRONT LOWER SUSPENSION ARM |
| 352120-G (opens in new tab) | XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - GRAPHITE |
| 352120-M (opens in new tab) | XB8 COMPOSITE FRONT LOWER SUSPENSION ARM - MEDIUM |
| 352121 | XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - MEDIUM |
| 352121-G (opens in new tab) | XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - GRAPHITE |
| 352121-H (opens in new tab) | XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - HARD |
| 352121-S | XB8 C-HUB COMPOSITE FRONT LOWER SUSPENSION ARM - SHORT - SOFT |
| 352133-G (opens in new tab) | XB8 FRONT UPPER ARM - GRAPHITE |
| 352133-M (opens in new tab) | XB8 FRONT UPPER ARM - MEDIUM |
| 352135 | XB8 FRONT UPPER ARM FOR ARM WING - SOFT |
| 352135-G | XB8 FRONT UPPER ARM FOR ARM WING - GRAPHITE |
| 352135-M | XB8 FRONT UPPER ARM FOR ARM WING - MEDIUM |
| 352150 | FRONT UPPER ARM BALL JOINT (2) |
| 352150-G (opens in new tab) | FRONT UPPER ARM BALL JOINT - GRAPHITE (2) |
| 352160 | STEEL MOUNTING BALL 6.8MM (2) |
| 352170 | STEEL ECCENTRIC BUSHING 0° (2) |
| 352174 | STEEL ECCENTRIC BUSHING 1° - V2 (2) |
| 352175 (opens in new tab) | STEEL ECCENTRIC BUSHING 2° - V2 (2) |
| 352179 (opens in new tab) | COMPOSITE BUSHING & BALL MOUNT SET (2+2) |
| 352180 | STEEL BALL MOUNT (2) |
| 352194 | XB8 LEXAN® FRONT UPPER ARM WINGS IFMAR LEGAL - SET |
| 352244 | XB8 PB STEERING BLOCK LB |
| 352244-G (opens in new tab) | XB8 PB STEERING BLOCK LB - GRAPHITE |
| 352244-H (opens in new tab) | XB8 PB STEERING BLOCK LB - HARD |
| 352245 (opens in new tab) | XB8 C-HUB STEERING BLOCK LB WITH ALU INSERTS |
| 352254 (opens in new tab) | ALU STEERING BLOCK - SWISS 7075 T6 |
| 352273 (opens in new tab) | ALU CASTER BLOCK 18° RIGHT - SWISS 7075 T6 |
| 352277 (opens in new tab) | COMPOSITE C-HUB 16° RIGHT |
| 352278 (opens in new tab) | ALU CASTER BLOCK 6° RIGHT - SWISS 7075 T6 |
| 352279 (opens in new tab) | COMPOSITE C-HUB 6° RIGHT |
| 352283 (opens in new tab) | ALU CASTER BLOCK 18° LEFT - SWISS 7075 T6 |
| 352287 (opens in new tab) | COMPOSITE C-HUB 16° LEFT |
| 352288 (opens in new tab) | ALU CASTER BLOCK 6° LEFT - SWISS 7075 T6 |
| 352289 | COMPOSITE C-HUB 6° LEFT |
| 352293 (opens in new tab) | STEEL C-HUB BUSHING (2) |
| 352314 (opens in new tab) | COMPOSITE SQUARE ADJ. ROLL-CENTER BUSHINGS - V2 (2) |
| 352334 | XB8 ALU FRONT UPPER ARM HOLDER FOR SEMI-SPLIT BULKHEAD |
| 352340 | XB8 ALU FRONT LOWER SUSP. HOLDER FOR SEMI-SPLIT BULKHEAD - FRONT |
| 352341 | XB8 ALU FRONT LOWER SUSP. HOLDER FOR SEMI-SPLIT BULKHEAD - REAR |
| 352366 (opens in new tab) | XB8 CARBON STEERING PLATE - 1 DOT (L+R) |
| 352367 (opens in new tab) | XB8 CARBON STEERING PLATE - 2 DOTS (L+R) |
| 352368 (opens in new tab) | XB8 CARBON STEERING PLATE - 3 DOTS (L+R) |
| 352370 | XB8 ALU STEERING PLATE - SWISS 7075 T6 (L+R) |
| 352372 | XB8 ALU STEERING PLATE - SWISS 7075 T6 (L+R) |
| 352378 | XB8 ALU STEERING PLATE - SWISS 7075 T6 (L+R) |
| 352381 (opens in new tab) | XB8 CASTER CLIPS (2) |
| 352440 (opens in new tab) | ALU ANTI-ROLL BAR CENTERING COLLAR 3.5x7.8x4.9MM (2) |
| 352460 (opens in new tab) | PIVOT BALL 5.8 (10) |
| 352470 (opens in new tab) | COMPOSITE BALL JOINT 5.8 (8) |
| 352470-G (opens in new tab) | COMPOSITE BALL JOINT 5.8 - GRAPHITE (8) |
| 352489 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 1.8MM |
| 352490 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 2.0MM |
| 352492 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 2.2MM |
| 352493 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 2.3MM |
| 352494 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 2.4MM |
| 352495 | XB8 FRONT ANTI-ROLL BAR 2.5MM |
| 352496 (opens in new tab) | XB8 FRONT ANTI-ROLL BAR 2.6MM |
| 352498 | XB8 FRONT ANTI-ROLL BAR 2.8MM |
| 352508 | SERVO SAVER FOR SEMI-SPLIT BULKHEAD - GRAPHITE - SET |
| 352516 | XB8 COMPOSITE SERVO SAVER FOR SEMI-SPLIT BULKHEAD - GRAPHITE |
| 352526 (opens in new tab) | ALU SERVO SAVER LOWER ARM - SWISS 7075 T6 |
| 352554 | ALU SERVO SAVER PIVOT SHAFT WITH CHASSIS LOCK (2) |
| 352561 | SERVO SAVER SPRING PROGRESSIVE |
| 352576 (opens in new tab) | STEERING PLATE BUSHING (2) |
| 352582 | XB8 ALU STEERING PLATE FOR SEMI-SPLIT BULKHEAD - SWISS 7075 T6 |
| 352583 | XT8 ALU STEERING PLATE FOR SEMI-SPLIT BULKHEAD - SWISS 7075 T6 |
| 352634 | ADJ. TURNBUCKLE M5 L/R 50MM - SPRING STEEL (2) |
| 352652 (opens in new tab) | BALL STUD 6.8MM (4) |
| 352653 (opens in new tab) | BALL STUD 6.8MM WITH BACKSTOP - M3 - NICKEL COATED (2) |
| 352658 (opens in new tab) | BALL STUD 6.8MM WITH BACKSTOP L=6MM - M3x8 (2) |
| 352659 | BALL STUD 6.8MM WITH BACKSTOP L=6MM - M3x11 - NICKEL COATED (2) |
| 352664 (opens in new tab) | COMPOSITE STEERING BALL JOINT 6.8MM - V3 (2) |
| 352666 (opens in new tab) | XB8 COMPOSITE RELIEF STEERING BALL JOINT 6.8MM - V2 (2) |
| 352670 | SERVO BALL JOINT 5.8MM (4) |
| 352670-G (opens in new tab) | SERVO BALL JOINT 5.8MM - GRAPHITE (4) |
| 352680 (opens in new tab) | ALU COUNTERSUNK SHIM FOR BALL STUD (10) |
| 353021 (opens in new tab) | COMPOSITE REAR BRACE HOLDER WITH TWO ASSEMBLY POSITIONS |
| 353055 | XB8 GRAPHITE REAR SHOCK TOWER FOR SEMI-SPLIT BULKHEAD 4MM |
| 353056 | XB8 ALU REAR SHOCK TOWER FOR SEMI-SPLIT BULKHEAD (4MM) |
| 353057 (opens in new tab) | XB8 ALU REAR SHOCK TOWER FOR SEMI-SPLIT BULKHEAD - LOWER |
| 353082 (opens in new tab) | COMPOSITE REAR BRACE - MEDIUM - M |
| 353115 | COMPOSITE REAR LOWER SUSPENSION ARM - MEDIUM |
| 353116 | COMPOSITE REAR LOWER SUSPENSION ARM - HARD |
| 353116-G (opens in new tab) | COMPOSITE REAR LOWER SUSPENSION ARM - GRAPHITE |
| 353116-XH | COMPOSITE REAR LOWER SUSPENSION ARM - X-HARD |
| 353124-G (opens in new tab) | COMPOSITE SUSPENSION REAR ARM - LSM - RIGHT - GRAPHITE |
| 353124-H (opens in new tab) | COMPOSITE SUSPENSION REAR ARM - LSM - RIGHT - HARD |
| 353125-G (opens in new tab) | COMPOSITE SUSPENSION REAR ARM - LSM - LEFT - GRAPHITE |
| 353125-H (opens in new tab) | COMPOSITE SUSPENSION REAR ARM - LSM - LEFT - HARD |
| 353127-G (opens in new tab) | COMPOSITE REAR LOWER SUSPENSION ARM - SHORT - GRAPHITE |
| 353127-H (opens in new tab) | COMPOSITE REAR LOWER SUSPENSION ARM - SHORT - HARD |
| 353127-XH (opens in new tab) | COMPOSITE REAR LOWER SUSPENSION ARM - SHORT - X-HARD |
| 353130 (opens in new tab) | REAR UPPER INNER CAMBER LINK BALL JOINT (2) |
| 353130-G (opens in new tab) | REAR UPPER INNER CAMBER LINK BALL JOINT - GRAPHITE (2) |
| 353151 (opens in new tab) | RELIEF REAR UPPER OUTER CAMBER LINK BALL JOINT (2) |
| 353151-G (opens in new tab) | RELIEF REAR UPPER OUTER CAMBER LINK BALL JOINT - GRAPHITE (2) |
| 353160 (opens in new tab) | MOUNTING BALL 6.8 (4) |
| 353170 | PIVOT BALL 6.8 (4) |
| 353185 | XB8 COMPOSITE BUSHING FOR ALU REAR HUB CARRIER (2+2) |
| 353191 | XB8 CARBON REAR LOWER ARM PLATE 1.6MM (2) |
| 353193 (opens in new tab) | XB8 COMPOSITE REAR MUD PROTECTOR (L+R) |
| 353250 (opens in new tab) | XB8 CARBON BRACES FOR CHASSIS SIDE GUARDS - SET |
| 353280 (opens in new tab) | CARBON INSERT FOR MEDIUM REAR COMPOSITE BRACE - SET |
| 353334 | XB8 ALU REAR LOWER SUSP. HOLDER FOR SEMI-SPLIT BULKHEAD - REAR |
| 353337 (opens in new tab) | XB8 ALU REAR EXTRA LOWER SUSP. HOLDER FOR SEMI-SPLIT BULKHEAD - FRONT |
| 353354 (opens in new tab) | XB8 COMPOSITE REAR UPRIGHT LB |
| 353354-G (opens in new tab) | XB8 COMPOSITE REAR UPRIGHT LB - GRAPHITE |
| 353354-H (opens in new tab) | XB8 COMPOSITE REAR UPRIGHT LB - HARD |
| 353366 (opens in new tab) | XB8 ALU REAR UPRIGHT - SWISS 7075 T6 - V2 |
| 353370 (opens in new tab) | SET OF COMPOSITE REAR HUB CARRIER SHIMS |
| 353371 (opens in new tab) | SET OF COMPOSITE LOWER ARM SHIMS |
| 353394 (opens in new tab) | CARBON EXTENSION FOR ALU REAR UPRIGHT (1+1) |
| 353396 (opens in new tab) | GRAPH. EXTENSION ALU REAR UPRIGHT - 2MM LOWER CAMBER LINK - 2 DOTS (1+1) |
| 353420 (opens in new tab) | REAR ANTI-ROLL BAR 2.0MM |
| 353422 (opens in new tab) | REAR ANTI-ROLL BAR 2.2MM |
| 353424 (opens in new tab) | REAR ANTI-ROLL BAR 2.4MM |
| 353425 (opens in new tab) | REAR ANTI-ROLL BAR 2.5MM |
| 353426 (opens in new tab) | REAR ANTI-ROLL BAR 2.6MM |
| 353428 | REAR ANTI-ROLL BAR 2.8MM |
| 353430 | REAR ANTI-ROLL BAR 3.0MM |
| 353432 | REAR ANTI-ROLL BAR 3.2MM |
| 353510 (opens in new tab) | REAR WING |
| 353512 (opens in new tab) | LEXAN REAR WING - 1/8 OFF-ROAD |
| 353513-K (opens in new tab) | REAR WING - IFMAR - BLACK |
| 353515 (opens in new tab) | REAR WING - BLACK |
| 353517 | WICKERBILL REAR WING - WHITE |
| 353517-K | WICKERBILL REAR WING - BLACK |
| 353517-Y | WICKERBILL REAR WING - YELLOW |
| 353527 (opens in new tab) | XB8 COMPOSITE REAR WING HOLDER - EXTENDED SUPPORT AREA |
| 353561 (opens in new tab) | ALU REAR WING SHIM (2) |
| 353562 (opens in new tab) | CARBON REAR WING SHIM |
| 353565 (opens in new tab) | COMPOSITE REAR WING SHIM - BLACK (2) |
| 353580 (opens in new tab) | COMPOSITE WING HOLDER BRACE WITH REAR BODY POST |
| 353590 (opens in new tab) | LEXAN FRONT WING - GRIPPER |
| 354011 | CENTER DIFF MOUNTING PLATE SET - HIGHER |
| 354011-G (opens in new tab) | CENTER DIFF MOUNTING PLATE SET - HIGHER - GRAPHITE |
| 354041 | ALU BRAKE CAM POST & ROD (2+2) HARD COATED |
| 354049 (opens in new tab) | COMPOSITE CENTER DIFF MOUNTING PLATE - V2 |
| 354057 (opens in new tab) | CARBON CENTER DIFF MOUNTING PLATE |
| 354073 | BRAKE CAME ROD (1+1) |
| 354080 | COMPOSITE BUSHING FOR DIFF MOUNTING PLATE (2) |
| 354090 | BALL-SHAPED BRAKE BUSHING (2) |
| 354110 | BRAKE DISK - HARDENED - V2 |
| 354113 (opens in new tab) | SUPER-LIGHTWEIGHT VENTILATED BRAKE DISK - PRECISION-GROUND (2) |
| 354114 (opens in new tab) | SUPER-LIGHTWEIGHT VENTILATED BRAKE DISK - PRECISION-GROUND - LARGE (2) |
| 354121 | STEEL BRAKE PAD - LASER CUT - HARDENED (4) |
| 354130 | BRAKE PAD FIBER - V2 (4) |
| 354131 | GLUED BRAKE PAD SET - ULTRA-EFFICIENT (4) |
| 354132 | BRAKE PAD SLS (4) |
| 354180 | STEEL BRAKE PAD GUIDE PIN SCREW M3x16 (2) |
| 354813 | BEVEL DRIVE PINION GEAR 13T - MATCHED FOR 46T LARGE BEVEL GEAR |
| 354814 | BEVEL DRIVE PINION GEAR 14T - MATCHED FOR 46T LARGE BEVEL GEAR |
| 354846 | FRONT/REAR DIFF LARGE BEVEL GEAR 46T - MATCHED FOR 13T PINION GEAR |
| 355006 | DIFFERENTIAL 46T - MATCHED FOR 13T PINION GEAR - SET |
| 355013 (opens in new tab) | CENTER DIFFERENTIAL - LARGE - SET - V2 |
| 355022 (opens in new tab) | DIFFERENTIAL CASE - V2 |
| 355022-G (opens in new tab) | DIFFERENTIAL CASE - V2 - GRAPHITE |
| 355023 | CENTER DIFFERENTIAL CASE - V2 |
| 355023-G (opens in new tab) | CENTER DIFFERENTIAL CASE - V2 - GRAPHITE |
| 355031 (opens in new tab) | STEEL DIFF BEVEL & SATELLITE GEARS - V2 (2+4) |
| 355056 (opens in new tab) | CENTER DIFF SPUR GEAR 46T - LARGE |
| 355057 (opens in new tab) | CENTER DIFF SPUR GEAR 47T - LARGE |
| 355058 (opens in new tab) | CENTER DIFF SPUR GEAR 48T - LARGE |
| 355082 | CENTER DIFF PIN (2) |
| 355083 | EXTREME HEAT RESISTANT CENTER DIFF PIN WITH INSERTS (2+4) |
| 355084 | F/R DIFF PIN (2) |
| 355085 (opens in new tab) | HEAT RESISTANT ALU DIFF PIN & INSERTS - 2G CONFIG. F/R (2+4) |
| 355086 (opens in new tab) | EXTREME HEAT RESISTANT F/R ALU DIFF PIN WITH INSERTS (2+4) |
| 355087 (opens in new tab) | EXTREME HEAT RESISTANT CENTER ALU DIFF PIN WITH INSERTS (2+4) |
| 355091 (opens in new tab) | F/R DIFF GASKET (4) |
| 355092 (opens in new tab) | CENTER DIFF GASKET (2) |
| 355250 (opens in new tab) | ALU WHEEL AXLE - BLACK COATED (2) |
| 355251 (opens in new tab) | ALU WHEEL AXLE OFFSET +1MM - BLACK COATED (2) |
| 355252 (opens in new tab) | ALU WHEEL AXLE OFFSET +2MM - BLACK COATED (2) |
| 355253 (opens in new tab) | ALU WHEEL AXLE OFFSET +3MM - LIGHTWEIGHT - BLACK COATED (2) |
| 355254 (opens in new tab) | ALU WHEEL AXLE OFFSET +4MM - LIGHTWEIGHT - BLACK COATED (2) |
| 355255 | ALU WHEEL AXLE OFFSET +5MM - LIGHTWEIGHT - BLACK COATED (2) |
| 355261 (opens in new tab) | WHEEL NUT - RIBBED - HARD COATED (2) |
| 355265 | WHEEL NUT WITH COVER - HARD COATED (2) |
| 355292 (opens in new tab) | PIN WITH FLAT SPOT 3 x 16.8 (2) |
| 355471 (opens in new tab) | DRIVE SHAFT LOCKING RING (2) |
| 355472 (opens in new tab) | DRIVE SHAFT BOOT (2) |
| 356005 (opens in new tab) | CARBON BATTERY & RECEIVER COVER PLATE FOR HARD RADIO CASE |
| 356006 (opens in new tab) | COMPOSITE RADIO CASE SET - SPLIT |
| 356050 | BATTERY CABLE WITH SWITCH |
| 356140 | COMPOSITE SERVO MOUNT - SMALL (2) |
| 356200 (opens in new tab) | BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET |
| 356219 | COMPOSITE SERVO SHIMS 1.0, 1.5 & 2.5MM (2+2+2) |
| 356402 (opens in new tab) | XB8 BRAKE/THROTTLE SYSTEM - SET - V3 |
| 356510 (opens in new tab) | CLOSED BALL JOINT 3.9 (4) |
| 357212 (opens in new tab) | LOWER INNER PIVOT PIN F+R EUROS‘05 TQ (2) |
| 357222 (opens in new tab) | FRONT UPPER PIVOT PIN 4x45 (2) |
| 357230 | FRONT LOWER OUTER PIVOT PIN (2) |
| 357250 (opens in new tab) | STEEL PIVOT BALL 13.7MM (2) |
| 357251 (opens in new tab) | ALU PIVOT BALL 13.7MM WITH STEEL SCREW (2) |
| 357252 | ALU ADJUSTING NUT M15x1 (2) |
| 357253 (opens in new tab) | BRASS ADJUSTING NUT M15x1 (2) |
| 357254 | COMPOSITE BALL CUP 13.9MM (2) |
| 357254-G (opens in new tab) | COMPOSITE BALL CUP 13.9MM - GRAPHITE (2) |
| 357256 (opens in new tab) | PIVOT BALL CAMBER ALU SHIM 6x13x1 (2) |
| 357257 (opens in new tab) | PIVOT BALL CAMBER ALU SHIM 6x13x1.5 (2) |
| 357331 (opens in new tab) | REAR LOWER OUTER PIVOT PIN SCREW 3MM (2) |
| 358018 (opens in new tab) | COMPOSITE SET OF SHIMS FOR SHOCKS - DELRIN (2) |
| 358021 | COMPOSITE SHOCK PARTS WITH KEYED BALL JOINTS |
| 358027 | 2-WAY FLOW DELRIN SHOCK PISTON 5-H. (1.5MM) & 2-H. (1.0MM) (2) |
| 358028 | 2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.3MM) & 2-H. (1.1MM) (2) |
| 358029 | 2-WAY FLOW DELRIN SHOCK PISTON 6-H. (1.4MM) & 2-H. (1.1MM) (2) |
| 358030 | 2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.2MM) & 2-H. (1.2MM) (2) |
| 358031 | 2-WAY FLOW DELRIN SHOCK PISTON 8-H. (1.3MM) & 2-H. (1.2MM) (2) |
| 358032 (opens in new tab) | SHOCK PISTON SET 8-HOLE (1.2, 1.3) 10-H. (1.1MM) - DELRIN - V3 |
| 358033 (opens in new tab) | SHOCK PISTON SET 6-HOLE (1.2, 1.3, 1.4MM) - DELRIN - V3 |
| 358040 (opens in new tab) | HARDENED SHOCK SHIMS (4) |
| 358041 (opens in new tab) | STEEL SHOCK BUSHING (2) |
| 358043 | COMPOSITE SHOCK BUSHING & SHIM (2+2) |
| 358047 (opens in new tab) | STEEL M3/M3 UPPER SHOCK MOUNT STAND OFF WITH HEX (2) |
| 358047-T (opens in new tab) | XRAY TITANIUM M3/M3 UPPER SHOCK MOUNT STAND OFF WITH HEX (2) |
| 358048 | STEEL M4/M3 UPPER SHOCK MOUNT STAND OFF WITH HEX (2) |
| 358048-T (opens in new tab) | XRAY TITANIUM M4/M3 UPPER SHOCK MOUNT STAND OFF WITH HEX (2) |
| 358057-K (opens in new tab) | XB8/GT MULTI ADJ. 3-IN-1 ALU SHOCK CAP SWISS 7075 T6 + MEMBRANES (2) |
| 358074 | FOLDING SHOCK BOOT (4) |
| 358082 (opens in new tab) | SHOCK RUBBER MEMBRANE (4) |
| 358083 | SHOCK RUBBER MEMBRANE RIBBED (4) |
| 358084-S (opens in new tab) | XB8 SHOCK RUBBER MEMBRANE BOTTOM RIBBED - SOFT (4) |
| 358085 | XB8 SHOCK RUBBER VALVE (4) |
| 358087-M (opens in new tab) | XB8 SHOCK RUBBER MEMBRANE CELL - MEDIUM (4) |
| 358087-S (opens in new tab) | XB8 SHOCK RUBBER MEMBRANE CELL - SOFT (4) |
| 358111 (opens in new tab) | XB8 FRONT SHOCK ABSORBERS 44.5MM – COMPLETE SET (2) |
| 358131 (opens in new tab) | XB8 ALU FRONT SHOCK BODY 44.5MM - SWISS 7075 T6 (2) |
| 358142 | ALU SHOCK BODY NUT FOR SHOCK BOOT (2) |
| 358150 | ALU SHOCK BODY ADJ. NUT (2) |
| 358162 (opens in new tab) | FRONT SHOCK SHAFT 56MM - V2 (2) |
| 358211 (opens in new tab) | XB8 REAR SHOCK ABSORBERS 55MM – COMPLETE SET (2) |
| 358231 (opens in new tab) | XB8 ALU REAR SHOCK BODY 55MM - SWISS 7075 T6 (2) |
| 358266 (opens in new tab) | REAR SHOCK SHAFT 66.5MM (2) |
| 358315 (opens in new tab) | XRAY FRONT SPRING 69MM - 3 DOTS (2) |
| 358316 (opens in new tab) | XRAY FRONT SPRING 69MM - 4 DOTS (2) |
| 358317 (opens in new tab) | XRAY FRONT SPRING 69MM - 5 DOTS (2) |
| 358334 (opens in new tab) | XRAY REAR SPRING 85MM - 2 DOTS (2) |
| 358335 (opens in new tab) | XRAY REAR SPRING 85MM - 3 DOTS (2) |
| 358342 (opens in new tab) | XRAY REAR SPRING 82MM - 2 DOTS (2) |
| 358343 | XRAY REAR SPRING 82MM - 3 DOTS (2) |
| 358344 (opens in new tab) | XRAY REAR SPRING 82MM - 4 DOTS (2) |
| 358400 (opens in new tab) | 4-SHOE CLUTCH - COMPLETE SET |
| 358413 (opens in new tab) | 4-SHOE CLUTCH BELL 13T + 3x BALL-BEARING |
| 358413-L (opens in new tab) | 4-SHOE CLUTCH BELL 13T - LIGHTWEIGHT + 3x BALL-BEARING |
| 358414 (opens in new tab) | 4-SHOE CLUTCH BELL 14T + 3x BALL-BEARING |
| 358414-L | 4-SHOE CLUTCH BELL 14T - LIGHTWEIGHT + 3x BALL-BEARING |
| 358430 | 4-SHOE FLYWHEEL + FLYWHEEL COLAR |
| 358456 | 4-SHOE ALU CLUTCH SHOE 1g - MEDIUM (4) |
| 358457 | 4-SHOE ALU CLUTCH SHOE 1g - HARD (4) |
| 358458 | 4-SHOE ALU CLUTCH SHOE - SOFT (4) |
| 358459 | 4-SHOE ALU CLUTCH SHOE - MEDIUM (4) |
| 358460 | 4-SHOE ALU CLUTCH SHOE - HARD (4) |
| 358461 (opens in new tab) | 4-SHOE GRAPHITE CLUTCH SHOE - LONG LIFE (4) |
| 358480 (opens in new tab) | 4-SHOE CLUTCH SPRINGS - GOLD - SOFT (4) |
| 358481 (opens in new tab) | 4-SHOE CLUTCH SPRINGS - GREY - MEDIUM (4) |
| 358482 | 4-SHOE CLUTCH SPRINGS - SILVER - HARD (4) |
| 358512 (opens in new tab) | CLUTCH BELL 12T WITH BALL-BEARINGS |
| 358513 (opens in new tab) | CLUTCH BELL 13T WITH BALL-BEARINGS |
| 358514 | CLUTCH BELL 14T WITH BALL-BEARINGS |
| 358517 (opens in new tab) | CLUTCH BELL 13T WITH BALL-BEARINGS - LIGHTWEIGHT |
| 358518 | CLUTCH BELL 14T WITH BALL-BEARINGS - LIGHTWEIGHT |
| 358533 | FLYWHEEL - HIGH TORQUE - LIGHTWEIGHT |
| 358540 (opens in new tab) | FLYWHEEL COLLAR |
| 358563 (opens in new tab) | GRAPHITE CLUTCH SHOE - LONG LIFE (2) |
| 358564 (opens in new tab) | ALU CLUTCH SHOE - HARD (3) |
| 358584 | CLUTCH SPRINGS - MEDIUM (3) |
| 358588 (opens in new tab) | HIGH TORQUE CLUTCH SPRINGS - MEDIUM (3) |
| 358589 (opens in new tab) | HIGH TORQUE CLUTCH SPRINGS - SILVER - HARD (3) |
| 358605 (opens in new tab) | XB8 FUEL TANK 125CC WITH FLOATING FILTER & TRANSIENT JET |
| 358645 (opens in new tab) | FUEL TANK CAP RUBBER SEAL |
| 358660 | CARBON 125CC FUEL TANK GUARD |
| 358680 | FUEL TANK HOLDERS (2) |
| 358685 (opens in new tab) | FUEL TANK MOUNTING GROMMET (4) |
| 358709 (opens in new tab) | ALU MONOBLOCK ENGINE MOUNT - SWISS 7075 T6 |
| 358718 | ALU STAND FOR ENGINE MOUNT - FX, NOVAROSSI, MAX, SIRIO |
| 358719 | ALU STAND FOR ENGINE MOUNT - PICCO, REDS, ORION, LRP, OS, ULTIMATE RACING |
| 358722 | EXHAUST WIRE MOUNT SET - LONG |
| 358724 | ALU ENGINE MOUNT - CNC MACHINED (L+R) |
| 358731 (opens in new tab) | EXHAUST MOUNTING WIRE - LONG |
| 358801 (opens in new tab) | AIR FILTER SET - LOW PROFILE |
| 358811 (opens in new tab) | AIR FILTER ELBOW - LOW PROFILE |
| 358821 (opens in new tab) | AIR FILTER BODY & CAP - LOW PROFILE - V2 |
| 358832 (opens in new tab) | COMPOSITE AIR FILTER COVER |
| 358841 | AIR FILTER FOAM & OIL - LOW PROFILE |
| 358842 (opens in new tab) | AIR FILTER FOAM - LOW PROFILE (10) |
| 358901 (opens in new tab) | COMPOSITE FUEL FILTER SET |
| 358930 (opens in new tab) | FUEL FILTER MOUNT & TUBING HOLDERS |
| 358941 (opens in new tab) | COMPOSITE TUBING HOLDER FOR FUEL TANK (2) |
| 358950 | SILICONE TUBING 1M (2.4 x 5.5MM) |
| 358951 (opens in new tab) | SILICONE TUBING 1M (2.4 x 5.5MM) FLUORESCENT YELLOW |
| 359050 (opens in new tab) | BALL-BEARING 5x10x4 STEEL SEALED - GREASE - V2 (2) |
| 359101 | MOUNTING HARDWARE PACKAGE FOR XB8 - SET OF 134 PCS |
| 359400 (opens in new tab) | BODY CLIP (10) |
| 359713 (opens in new tab) | XRAY XB8 / XB8E EAZY BODY |
| 359714 (opens in new tab) | XRAY XB8 / XB8E EAZY BODY - LIGHTWEIGHT |
| 359808 | WHEELS STARBURST - PINK (4) |
| 359809 | WHEELS STARBURST - YELLOW (4) |
| 362280 (opens in new tab) | ALU CONICAL SHIM 3x6x2.0MM (10) |
| 362280-K (opens in new tab) | ALU CONICAL SHIM 3x6x2.0MM - BLACK (10) |
| 362280-O (opens in new tab) | ALU CONICAL SHIM 3x6x2.0MM - ORANGE (10) |
| 372176 (opens in new tab) | SPRING 4.25 COILS 3.6x6x0.4MM, C=1.5 - GOLD (SOFT) (2) |
| 372180 (opens in new tab) | SPRING 4.0 COILS 3.6x6x0.5MM, C=3.5 - GOLD (2) |
| 397311 (opens in new tab) | XRAY STICKER FOR BODY - WHITE |
| 397312 | XRAY STICKER FOR BODY - METALIC SILVER |
| 397313 | XRAY STICKER FOR BODY - PURPLE |
| 397314 | XRAY STICKER FOR BODY - NEON RED |
| 397315 | XRAY STICKER FOR BODY - NEON YELLOW |
| 397316 | XRAY STICKER FOR BODY - NEON ORANGE |
| 397320 | XRAY STICKERS FOR BODY - 5 DIFFERENT COLORS |
| 397359 (opens in new tab) | XRAY XB8 STICKER FOR BODY - WHITE |
| 650007 | FX K502 - COMBO: ENGINE + MUFFLER 2169 + MANIFOLD - MEDIUM |
| 650009 | FX K303 TUNED - COMBO: ENGINE + MUFFLER 2169 + MANIFOLD - MEDIUM |
| 650010 | FX K303L TUNED - LINEAR - COMBO: ENGINE + MUFFLER 2169 + MANIFOLD - MEDIUM |
| 650107 | FX K303 TUNED - 3 PORTS, DLC, BALANCED |
| 650108 | FX K303L TUNED - LINEAR - 3 PORTS, DLC, BALANCED |
| 650304 | FX K502 - 5 PORTS, DLC, CERAMIC BEARING, BALANCED |
| 659501 | MUFFLER 3.5cc EFRA 2100 |
| 659503 | MUFFLER 3.5cc EFRA 2131 |
| 659505 | MUFFLER 3.5cc EFRA 2131 + MANIFOLD - MEDIUM - CHROME |
| 659506 | MUFFLER 3.5cc EFRA 2131 + MANIFOLD - MEDIUM |
| 659508 | MUFFLER 3.5cc OFF-ROAD - EFRA 2169 |
| 659558 | MUFFLER 3.5cc OFF-ROAD - EFRA 2169 + MANIFOLD - MEDIUM |
| 659704 | MANIFOLD 3.5cc OFF-ROAD - MEDIUM |
| 659706 | MANIFOLD 3.5cc OFF-ROAD - SHORT-MEDIUM |
