Parts listSource: Yokomo

Yokomo RD2.0 Parts List

Yokomo

RD2.0

Setup sheets →

Spring chart 1/10 drift tire chart

RD2.0 parts & upgrades at AMain →AD

For this car:ADDrift electronics

Commonly replaced parts

What gets replaced most often — full list below.

Part #	Description
RD-008FL (opens in new tab)	RD2.0 Front Lower A-Arm (2)
Y2-415SAA (opens in new tab)	RD / SD Aluminum Light Weight Steering Blocks Black 2.0
Y2-008RAW (opens in new tab)	RD2.0 SD2.0 Aluminum Short Rear Weight H Suspension Arms Black (2)
RD-202 (opens in new tab)	RD2.0 Steering Bell Crank Set
Y4-001FA (opens in new tab)	Front Urethane Bumper
BB-105-2A (opens in new tab)	5x10x4mm Ball Bearing (2)
YS-7HG2 (opens in new tab)	High Grade Silicone Shock O-Ring Set Blue (8)
Y2-207A (opens in new tab)	YD2 SXIII Ball Cup Set 4.8mm
B2-501MRA (opens in new tab)	Ball Differential Outdrive Set (2)
RC-313SA (opens in new tab)	Body Clips 12 Small
ZR-DRAA (opens in new tab)	DRA Competition Drift Tire 4 for Asphalt Surface
ZR-DRCA (opens in new tab)	DRC Competition Drift Tire 4 for Carpet Surface
D-180A (opens in new tab)	RWD Drift Spring Set 6 2 Front 4 Rear

See all 410 parts →

More option parts for this car

Parts & upgrades at AMainAD Spring chart 1/10 drift tire chart

The RD2.0 Rookie Drift is Yokomo’s entry-level RWD drift kit, and it runs the same YD-2-derived geometry as the rest of the range — so most of what fits it also fits the SD cars. The list below is every part Yokomo catalogs for it, with the fitment column showing what came in the kit and what is an optional upgrade.

Full parts list

410 parts, 91 of them kit-standard. Spring rates and their color codes are cross-referenced in the Yokomo drift spring chart. The SD3.0 parts list covers the sister car.

Chassis & Body

Part #	Description	Fitment
RC-313SA (opens in new tab)	Body Clips 12 Small	Kit standard
RC-313SBA	Body Clips, Small (Black, 10)	Option
RD-002 (opens in new tab)	RD2.0 Main Chassis	Kit standard
RD-003 (opens in new tab)	RD2.0 Upper Deck Adaptor	Kit standard
SD-002S3 (opens in new tab)	SD3.0 Graphite Main Chassis	Optional spare
SD-003S3 (opens in new tab)	SD3.0 Graphite Upper Deck	Optional spare
Y2-001GBA (opens in new tab)	YD2 Graphite Bumper Brace	Option
Y2-001RAA	Wide / Narrow Diffuser	Kit standard
Y2-002AL (opens in new tab)	Aluminum Main Chassis (2.0mm)	Option
Y2-002S2 (opens in new tab)	SD2.0 Graphite Main Chassis 2.4mm	Optional spare
Y2-002S2R (opens in new tab)	SD2.0 Graphite Rear Chassis 2.4mm	Optional spare
Y2-002SDB (opens in new tab)	SD2.0 Aluminum Chassis Bridge	Optional spare
Y2-002ZA (opens in new tab)	YD2Z Plastic Main Chassis	Kit standard
Y2-003ADFA	Upper Deck Adapter, Front	Option
Y2-003ZA (opens in new tab)	YD2Z Plastic Upper Deck Upper Deck Posts	Kit standard
Y2-003ZSA	Upper Deck Adapter, Rear	Option
Y2-118CG2A (opens in new tab)	Graphite Battery Holder (Shorty, ver2)	Option
Y2-303AP (opens in new tab)	SD2.0 Aluminum Upper Deck Post	Option
Y4-016A (opens in new tab)	Front Rear Body Mount Set	Kit standard
ZS-016MGF (opens in new tab)	Front Magnetic Body Mount Black	Option
ZS-016MGFBL (opens in new tab)	Front Magnetic Body Mount Blue	Option
ZS-016MGFP (opens in new tab)	Front Magnetic Body Mount Purple	Option
ZS-016MGFR	Front Magnetic Body Mount (Red)	Option
ZS-016MGR (opens in new tab)	Rear Magnetic Body Mount Black	Option
ZS-016MGRBL (opens in new tab)	Rear Magnetic Body Mount Blue	Option
ZS-016MGRP (opens in new tab)	Rear Magnetic Body Mount Purple	Option
ZS-016MGRR (opens in new tab)	Rear Magnetic Body Mount Red	Option

Steering

Part #	Description	Fitment
D-155-20AA (opens in new tab)	20mm Rod End Adapter 2 Narrow Steering	Optional spare
D-155-23-A (opens in new tab)	23mm Rod End Adapter 2 Narrow Steering	Optional spare
D-155-23AA (opens in new tab)	23mm Rod End Adapter 2 Narrow Steering	Optional spare
DPP-302V4BL (opens in new tab)	DP302 V4 Drift Steering Gyro Blue	Option
DPP-302V4PB (opens in new tab)	DP302 v4 Drift Steering Gyro Purple	Option
DPP-302V4RB (opens in new tab)	DP302 v4 Drift Steering Gyro Red	Option
IB-202KPA	King Pin for Center Link	Kit standard
MD-202-1	Aluminum Steering Slide Rack	Optional spare
RD-202 (opens in new tab)	RD2.0 Steering Bell Crank Set	Kit standard
RD-301 (opens in new tab)	RD2.0 Suspension Mount Servo Horn	Kit standard
S4-200-A	Steering Bellcrank, Left / Right	Optional spare
SD-202BS3 (opens in new tab)	SD3.0 Aluminum Steering Bell Crank Base	Optional spare
SD-202CS3 (opens in new tab)	SD3.0 Aluminum Center Link	Optional spare
Y2-200L (opens in new tab)	SD2.0 Aluminum Lower Bellcrank Arm Adaptor	Optional spare
Y2-200P (opens in new tab)	SD2.0 Graphite Bellcrank Arm Plate 3mm	Optional spare
Y2-200U (opens in new tab)	SD2.0 Upper Bellcrank Arm Adaptor	Optional spare
Y2-201P (opens in new tab)	SD2.0 Bellcrank Arm Mount Post	Optional spare
Y2-202BA	Roundly Rack Base	Optional spare
Y2-202SCA	Roundly Rack Stopper Cam	Optional spare
Y2-202SMA	Roundly Rack Servo Mount	Optional spare
Y2-202UDA	Roundly Rack Upper Deck (Matte Graphite)	Optional spare
Y2-202UMA	Roundly Rack Upper Arm Mount	Optional spare
Y2-301A	Servo Mount / Antenna Mount / Suspension Mount / Hub	Kit standard
Y2-302ZDA (opens in new tab)	YD2Z Front Bulkhead Upper Arm Holder Servo Mount	Kit standard
Y2-415AL3A (opens in new tab)	YD2 3mm Aluminum Steering Stopper	Option
Y2-415CPFA	Caliper for Front Steering Block	Kit standard
Y2-415FR (opens in new tab)	SD2.0 Steering Blocks Rear Hub Carriers Set	Kit standard
Y2-415S2A	Steering Block Ver.2	Option
Y2-415SA3A	Variable Kingpin Steering Block Weight Set	Option
Y2-415SA4A	Variable Kingpin Steering Block 4mm Pin	Option
Y2-415SA5A	Variable Kingpin Steering Block 5mm Pin	Option
Y2-415SA6A	Variable Kingpin Steering Block 0.5mm Spacer	Option
Y2-415SA7A	Variable Kingpin Steering Block 1.0mm Spacer	Option
Y2-415SAA (opens in new tab)	RD / SD Aluminum Light Weight Steering Blocks Black 2.0	Option
Y2-415SALA (opens in new tab)	YD2 Aluminum Lightweight Front Steering Block Variable Kingpin Angle	Option
Y2-OP2A (opens in new tab)	Aluminum Steering Block Set (Black)	Option
Y4-201PA	Aluminum Bellcrank Post	Kit standard
Y4-203AA	Aluminum Servo Mount	Option
YG-302V2 (opens in new tab)	YG302V2 Version 2 Drift Steering Gyro	Option

Front End

Part #	Description	Fitment
BD-009BFA (opens in new tab)	3x42mm Front Inner Suspension Arm Pin (2)	Kit standard
D-156-30AA (opens in new tab)	Front Lower A-Arm Aluminum Rod End Adapter (30mm)	Option
RD-008FL (opens in new tab)	RD2.0 Front Lower A-Arm (2)	Kit standard
RD-008FU (opens in new tab)	RD2.0 Front Upper A-Arm Ball Cup (2)	Kit standard
Y2-001BA	Aluminum Front Bumper Brace	Option
Y2-003SDF (opens in new tab)	SD2.0 Graphite Front Upper Deck 2.4mm	Option
Y2-008FSCA	Front Lower Short A Arm Set (Aluminum, Chamfered)	Option
Y2-008FSLA	Front Lower Short A Arm, Left (Aluminum, Chamfered)	Option
Y2-008FSRA	Front Lower Short A Arm, Right (Aluminum, Chamfered)	Option
Y2-008FT (opens in new tab)	Aluminum Front Lower T-Arm Set Black 2 Short RD / SD	Option
Y2-008FTBL (opens in new tab)	Aluminum Front Lower T-Arm Set Blue 2 Short RD / SD	Option
Y2-008FTP (opens in new tab)	Aluminum Front Lower T-Arm Set Purple 2 Short RD / SD	Option
Y2-008FTR (opens in new tab)	Aluminum Front Lower T-Arm Set Red 2 Short RD / SD	Option
Y2-008FUCA	Aluminum Front Upper A Arm (Chamfered)	Option
Y2-008FUIA	Front Upper I Arm (Black, Aluminum, Chamfered)	Option
Y2-009FAA	Front Upper A Arm Pin	Kit standard
Y2-010F-A	Front Axle	Kit standard
Y2-010FAA	Aluminum Front Axle	Option
Y2-010FHA (opens in new tab)	Aluminum UL Front Axle (2)	Option
Y2-017AFEA	Aluminum Front Shock Tower (Chamfered, Black)	Option
Y2-017AFEPA	Aluminum Front Shock Tower (Chamfered, Purple)	Option
Y2-017AFERA	Aluminum Front Shock Tower (Chamfered, Red)	Option
Y2-017AGBA (opens in new tab)	Carbon Fiber Aluminum Hybrid Front Shock Tower Black YD2 RD / SD	Option
Y2-017AGPA (opens in new tab)	Carbon Fiber Aluminum Hybrid Front Shock Tower Purple YD2 RD / SD	Option
Y2-017AGRA (opens in new tab)	Carbon Fiber Aluminum Hybrid Front Shock Tower Red YD2 RD / SD	Option
Y2-302MDA	Front Bulkhead / Upper Arm Holder / Suspension Mount	Option
Y2-B08FUI (opens in new tab)	RD / SD / MD Aluminum Front Upper I Arms Blue (2)	Option
Y2-P08FUIA (opens in new tab)	YD2 Aluminum Front Upper L-Arm Kit Purple	Option
Y2-R08FUIA (opens in new tab)	YD2 Aluminum Front Upper L Arm Kit Red	Option
Y4-001A	Front Plastic Bumper	Kit standard
Y4-001FA (opens in new tab)	Front Urethane Bumper	Kit standard

Rear End

Part #	Description	Fitment
BD-009BRA (opens in new tab)	3x45mm Rear Inner Suspension Arm Pin (2)	Kit standard
Y2-003AZA (opens in new tab)	YD2Z Aluminum Rear Upper Deck Adapter	Option
Y2-003SDR (opens in new tab)	SD2.0 Graphite Rear Upper Deck 2.4mm	Option
Y2-008R-A	LS Rear Lower Suspension Arm	Kit standard
Y2-008RA1A (opens in new tab)	Adjustable H-Arm A Left	Option
Y2-008RA2A (opens in new tab)	Adjustable H-Arm A Right	Option
Y2-008RAA (opens in new tab)	Aluminum YD2 YD4 Adjustable Rear H-Arm Kit	Option
Y2-008RASA (opens in new tab)	YD2 Aluminum Adjustable H Short Rear Suspension Arms Set Black	Option
Y2-008RAW (opens in new tab)	RD2.0 SD2.0 Aluminum Short Rear Weight H Suspension Arms Black (2)	Option
Y2-008RS1A	Adjustable Rear Short H Arm, Left	Option
Y2-008RS2A	Adjustable Rear Short H Arm, Right	Option
Y2-008RSA	Rear Short Lower Arm	Kit standard
Y2-008RW10 (opens in new tab)	RD2.0 SD2.0 Rear H-Arm Brass Weights 10g (2)	Optional spare
Y2-008RW20 (opens in new tab)	RD2.0 SD2.0 Rear H-Arm Brass Weights 20g (2)	Optional spare
Y2-008RW5 (opens in new tab)	RD2.0 SD2.0 Rear H-Arm Brass Weights 5g (2)	Optional spare
Y2-017ZA (opens in new tab)	YD2Z Plastic Front Rear Shock Tower	Kit standard
Y2-018AR2A	Aluminum Rear Shock Tower	Kit standard
Y2-018AR2PA	Aluminum Rear Shock Tower (Purple)	Option
Y2-018AR2RA	Aluminum Rear Shock Tower (Red)	Option
Y2-302ABP (opens in new tab)	SD2.0 Aluminum Rear Bulkhead Backplate	Option
Y2-302ALB (opens in new tab)	SD2.0 Aluminum Rear Bulkhead L	Option
Y2-302ARB (opens in new tab)	SD2.0 Aluminum Rear Bulkhead R	Option
Y2-415ART	Teams 3-Piece Rear Hub Carrier Set	Option
Y2-415RA	Rear Hub Carrier	Option
Y2-415RWA (opens in new tab)	YD2 High Traction Rear Hub Carrier Weight (2)	Option
Y2-BL8RAW (opens in new tab)	RD2.0 SD2.0 Aluminum Short Rear Weight H Suspension Arms Blue (2)	Option
Y2-OP3A (opens in new tab)	Aluminum Adjustable Rear Suspension Arm Set (Black)	Option
Y2-P08RASA (opens in new tab)	YD2 Aluminum Adjustable H Short Rear Suspension Arms Set Purple	Option
Y2-P08RAW (opens in new tab)	RD2.0 SD2.0 Aluminum Short Rear Weight H Suspension Arms Purple (2)	Option
Y2-R08RASA (opens in new tab)	YD2 Aluminum Adjustable H Short Rear Suspension Arms Set Red	Option
Y2-R08RAW (opens in new tab)	RD2.0 SD2.0 Aluminum Short Rear Weight H Suspension Arms Red (2)	Option

Suspension

Part #	Description	Fitment
B8-206LHA	4.8mm Rod End Ball, Long (15.0mm)	Kit standard
B8-206MHA (opens in new tab)	BD8 2018 2019 Rod End Ball Set 6 4.8mm 13mm	Kit standard
B8-206SHA (opens in new tab)	MS1.0 4.8mm Ball Studs 6 11.5mm	Kit standard
B8-206SHSA	4.8mm Rod End Ball B, Short Neck (11.5mm)	Option
B8-301AA (opens in new tab)	Aluminum Suspension Mount A 39.542.7mm	Option
B8-301BA (opens in new tab)	Aluminum Suspension Mount B 43.5mm46.7mm	Option
B8-301BSA (opens in new tab)	Plastic Suspension Mount Bushing Set	Option
B8-301CA (opens in new tab)	Aluminum Suspension Mount C 46.449.6mm	Option
BD-009AA (opens in new tab)	2x23mm Outer Suspension Arm Pin Set (4)	Kit standard
BD-301BA (opens in new tab)	3mm Suspension Arm Pin Ball (4)	Kit standard
D-142A	A Arm Rod End Adapter	Optional spare
D-155-20-A	20mm Rod End Adapter (2)	Optional spare
RD-008F17 (opens in new tab)	RD2.0 Rod End Adapter 2 17mm 4.5d	Kit standard
RD-008FA17 (opens in new tab)	SD2.0 Aluminum Rod End Adapter 2 4.5x17mm	Option
RD-008FA19 (opens in new tab)	SD2.0 Aluminum Rod End Adapter 2 4.5x19mm	Option
RD-008FA21 (opens in new tab)	SD2.0 Aluminum Rod End Adapter 2 4.5x21mm	Option
RD-301AD	Aluminum Rear Suspension Mount D (57.2-60.4mm)	Option
RD-301AE (opens in new tab)	RD2.0 Aluminum E Rear Suspension Mount Black 60.864mm	Option
RD-301AS (opens in new tab)	RD2.0 Aluminum Suspension Mount Set	Option
RD-301ASBL (opens in new tab)	RD2.0 Aluminum Adjustable Suspension Mount Set Blue	Option
RD-301ASP (opens in new tab)	RD2.0 Aluminum Adjustable Suspension Mount Set Purple	Option
RD-301ASR (opens in new tab)	RD2.0 Aluminum Adjustable Suspension Mount Set Red	Option
RD-301S (opens in new tab)	RD2.0 Molded Suspension Mount Spacers 2.0mm	Kit standard
Y2-207A (opens in new tab)	YD2 SXIII Ball Cup Set 4.8mm	Kit standard
Y2-301ACA (opens in new tab)	Aluminum Adjustable Suspension Mount Set	Option
Y2-301D2A	Aluminum Suspension Mount D	Option
Y2-301DBA	Brass Suspension Mount D	Option
Y2-301SA	1.0mm Suspension Mount Spacer	Option
YT-RWF5A (opens in new tab)	Steel Weight Set 5g (10)	Option
YT-RWS10A (opens in new tab)	Shorty Size Battery Chassis Weight 34g	Option
ZC-206SHSA (opens in new tab)	11.3mm Socket Head Ball Stud Set 6 S Size	Kit standard
ZC-A3605BA (opens in new tab)	3x6x0.5mm Aluminum Shim Black (8)	Option
ZC-A3610BA (opens in new tab)	3x6x1.0mm Aluminum Shim Black (8)	Option
ZC-A3615BA (opens in new tab)	3x6x1.5mm Aluminum Shim Black (8)	Option
ZC-A3620BA (opens in new tab)	3x6x2.0mm Aluminum Shim Black (8)	Kit standard
ZC-A3630BA (opens in new tab)	3x6x3.0mm Aluminum Shim Black (8)	Kit standard
ZC-A3660B (opens in new tab)	3x6x6mm Aluminum Spacers Black (8)	Option

Shocks

Part #	Description	Fitment
B7-S113A (opens in new tab)	Shock Piston 4 for SLF Short Shock II 1.1mm X 3 Hole	Optional spare
B7-S114A (opens in new tab)	Shock Piston 4 for SLF Short Shock II 1.1mm X 4 Hole	Optional spare
B7-S2BA (opens in new tab)	P3 O-Ring Collar SLF Short Shock v2 Black 4 Thick	Optional spare
RD-008RS (opens in new tab)	RD2.0 SD2.0 Aluminum Rear Lower Shock Adapter Black (2)	Option
Y2-RAC7	Shock End Ball	Kit standard
Y2-S116TA (opens in new tab)	YD2 LF Big Bore Tapered Shock Piston 1.1x6	Optional spare
Y2-S126TA (opens in new tab)	YD2 LF Big Bore Shock Taper Piston 1.2x6	Optional spare
Y2-S144A	Shock Piston, 1.4mm x 4 Hole	Optional spare
Y2-SBBSA (opens in new tab)	Aluminum SLF Big Bore Kashima Coated Drift Shocks Set Black	Option
Y2-SBBSBL (opens in new tab)	Aluminum SLF Big Bore Kashima Coated Drift Shocks Set Blue	Option
Y2-SBBSPA (opens in new tab)	Aluminum SLF Big Bore Kashima Coated Drift Shocks Set Purple	Option
Y2-SBBSRA (opens in new tab)	Aluminum SLF Big Bore Kashima Coated Drift Shocks Set Red	Option
Y4-8BA (opens in new tab)	Aluminum Shock Cap Ball (4)	Kit standard
Y4-S4A	SLF Shock Cylinder	Option
Y4-S4C	O-Ring Cap / Adjust Nut (Black)	Option
Y4-S5A	SLF Shock Shaft	Option
Y4-S5TA (opens in new tab)	YD4 Titanium Coated Shock Shaft (4)	Option
Y4-S6A	Shock Cap / Shock End	Option
Y4-S8A	Ball for Shock Cap / Shock End	Option
YS-5SSS-1A (opens in new tab)	Shock Shaft 1 Sss	Kit standard
YS-7BA (opens in new tab)	Down Stop O-Ring (8)	Option
YS-7HG2 (opens in new tab)	High Grade Silicone Shock O-Ring Set Blue (8)	Option
YS-7SX (opens in new tab)	X-Type Long Wear O-Rings (8)	Option
YS-8DMHA (opens in new tab)	Silicon Hard Type Diaphragm Set (4)	Kit standard
YS-S4AJMA	O-Ring Cap / Adjust Nut for 4-Piece Plastic Shock	Kit standard
YS-S4MA	Shock Cylinder for 4-Piece Plastic Shock	Kit standard
YS-S6MA	Shock Cap End / Shock End for 4-Piece Plastic Shock	Kit standard

Springs

Part #	Description	Fitment
B7-S3NA (opens in new tab)	SLF Standard Spring Cup (2)	Option
D-170BKA (opens in new tab)	32mm Regular Pitch Drift Spring Black 2 1.1x9.5 Coils	Option
D-170BLA	Drift Spring, 1.1mm x 10.5 Coils (Blue, Constant Pitch)	Option
D-170GA	Drift Spring, 1.3mm x 9.5 Coils (Green, Constant Pitch)	Option
D-170PA	Drift Spring, 1.2mm x 10.5 Coils (Pink, Constant Pitch)	Option
D-171GA	Drift Spring, 1.3mm x 9.5 Coils (Green, Progressive)	Option
D-171PA	Drift Spring, 1.2mm x 10.5 Coils (Pink, Progressive)	Option
D-171YA (opens in new tab)	32mm Variable Pitch Drift Spring Yellow 2 1.2x9.5mm	Option
D-177FAA (opens in new tab)	YD2 Front Direct Type RWD Drift Spring All Round	Option
D-177FSA (opens in new tab)	YD2 Front Direct Type RWD Drift Spring Soft	Option
D-178RAA (opens in new tab)	YD2 Rear Forward Type RWD Drift Spring All Round	Option
D-178RSA (opens in new tab)	YD2 Rear Forward Type RWD Drift Spring Soft	Option
D-179RAA (opens in new tab)	YD2 Rear Side Grip Type RWD Drift Spring All Round	Option
D-179RSA (opens in new tab)	YD2 Rear Side Grip Type RWD Drift Spring Soft	Option
D-180A (opens in new tab)	RWD Drift Spring Set 6 2 Front 4 Rear	Option
D-181R	Competition Spring, 1.3 x 28mm (Progressive)	Option
D-182F	Competition Spring, 1.4 x 26.5mm (Progressive)	Option
D-183F	Competition Spring, 1.5 x 26.5mm (Progressive)	Option
D-184F	Competition Spring, 1.5 x 26.5mm	Option
D-185	Competition Spring Set (4 Rates)	Option
YS-RDS	Shock Spring (Standard, 2)	Kit standard

Drivetrain

Part #	Description	Fitment
BM-4824A	DP48 24T Pinion Gear (Hard Steel)	Kit standard
MD-302TH	Aluminum Top Shaft Holder	Optional spare
MD-303I	Idler Shaft	Kit standard
RD-010FDS (opens in new tab)	Steel Double-Bearing Front Axle Set (2)	Option
RD-302 (opens in new tab)	RD2.0 Transmission Case	Kit standard
SG-4883R	83T Spur Gear (48P)	Kit standard
SG-A4880A	Yokomo DCS 80T Spur Gear	Option
Y2-010A	Rear Universal Drive Shaft, 49mm	Kit standard
Y2-302BPA	Brass Transmission Case Back Plate	Option
Y2-302S2A (opens in new tab)	YD2 SXIII High Traction Gearbox Spacer 2.0mm	Option
Y2-302ZA (opens in new tab)	YD2Z 3 Gear Transmission Case	Kit standard
Y2-303I-A	Idler Shaft	Kit standard
Y2-303IAA	Aluminum Idler Shaft	Option
Y2-303IGA	Graphite Idler Shaft	Option
Y2-304SD2 (opens in new tab)	SD2.0 Aluminum Motor Mount	Kit standard
Y2-304ZA (opens in new tab)	YD2Z Aluminum Motor Mount	Kit standard
Y2-631A (opens in new tab)	YD2 Aluminum Top Shaft 48p 20t	Kit standard
Y2-631SA	Top Shaft with 48P 20T (Steel)	Option
Y4-010-A	Universal Drive Shaft, 47mm	Option
Y4-010490A	49mm Universal Bone	Kit standard
Y4-010AA	Universal Axle	Kit standard
Y4-010BA	47mm Universal Bone	Option
Y4-630A	Aluminum Spur Gear Hub	Kit standard
Y4-630CA	Aluminum Spur Gear Hub	Option

Differentials

Part #	Description	Fitment
B2-501MRA (opens in new tab)	Ball Differential Outdrive Set (2)	Optional spare
B2-506A (opens in new tab)	Differential Drive Ring Set (2)	Optional spare
B2-508TSA (opens in new tab)	Ball Differential T-Nut Spring Set	Optional spare
B8-500DPA (opens in new tab)	Aluminum Drive Cup Protector Set	Option
MD-DHA	Aluminum Diff Height Adjust, Left & Right	Optional spare
MD-DHA31	Aluminum Diff Height Adjust, 3-Gear +1mm, Left & Right	Optional spare
MD-DHA32	Aluminum Diff Height Adjust, 3-Gear +2mm, Left & Right	Optional spare
MD-DHA41	Aluminum Diff Height Adjust, 4-Gear +1mm, Left & Right	Optional spare
MD-DHA42	Aluminum Diff Height Adjust, 4-Gear +2mm, Left & Right	Optional spare
Y2-500-A	Ball Diff Kit	Option
Y2-500AA (opens in new tab)	YD2 Aluminum Ball Differential	Option
Y2-500GM3A	Maintenance Kit for Diff Case	Kit standard
Y2-500GS-A	Plastic Gear Diff Unit	Kit standard
Y2-500GSAA (opens in new tab)	YD2 Bevel Gear Differential w Aluminum Drive Cups	Option
Y2-501GGA	Gasket for Gear Diff	Kit standard
Y2-501GS2A	Drive Cup for Gear Diff	Kit standard
Y2-501GSAA	Gear Diff Drive Cup	Option
Y2-501MRA (opens in new tab)	YD2 Aluminum Ball Differential Outdrives	Optional spare
Y2-502A	Solid Axle Set	Option
Y2-503GHA	Case for Gear Diff	Kit standard
Y2-503GPA	Plastic Bevel Gear Set	Kit standard
Y2-503GPHA (opens in new tab)	YD2 YZ2 YZ4SF2 Bevel Gear Set	Option
Y2-508A	Diff Adjustable Kit	Optional spare
Z2-503A (opens in new tab)	YZ2 Dirt Carpet Ball Differential Gear 52t 14 Balls	Option
Z2-503GHCA (opens in new tab)	Aluminum YZ2 Gear Differential Case Cap	Option
Z2-505TA (opens in new tab)	3 32 Tungsten Carbide Ball Differential Balls (14)	Option
ZD-505A (opens in new tab)	3 32 Differential Ball (24)	Option
ZD-505CDA (opens in new tab)	3 32 Ceramic Precision Differential Ball Set (12)	Option

Brakes

Part #	Description	Fitment
Y2-415BCPA	Caliper for Brake Disc	Option
Y2-415BDA	Brake Disc for Caliper	Option
Y2-415CPA (opens in new tab)	YD2 Complete Brake Disk Caliper Set	Option
Y2-415CPRA	Caliper for Rear Hub Carrier	Kit standard

Bearings

Part #	Description	Fitment
BB-105-2A (opens in new tab)	5x10x4mm Ball Bearing (2)	Kit standard
BB-1050CBA (opens in new tab)	5x10x4mm Ceramic Ball Bearing (2)	Option
BB-1050PA (opens in new tab)	5x10x4mm Super Precision Ball Bearing (2)	Option
BB-1510A (opens in new tab)	10x15x4mm Ball Bearing (2)	Kit standard
BB-1510CBA (opens in new tab)	10x15x4mm Ceramic Ball Bearing (2)	Option
BB-1510PA (opens in new tab)	10x15x4mm Super Precision Ball Bearing (2)	Option
BB-84-4A (opens in new tab)	Bellcrank Bearing (4)	Kit standard
BB-840PA (opens in new tab)	Super Precision Bellcrank Bearing (2)	Option
BB-85-4A (opens in new tab)	5x8x2.5mm Ball Bearing (4)	Option
BB-850PA (opens in new tab)	5x8x2.5mm Super Precision Ball Bearing (2)	Option
Y2-010FBA (opens in new tab)	5x10mm Low Friction Metal Shielded Ball Bearings (4)	Option
Y2-BBCMA	Ceramic Bearing Set	Option
ZC-507TA (opens in new tab)	1 16 Tungsten Carbide Thrust Ball (16)	Option
ZS-507A (opens in new tab)	Differential Thrust Bearing Set	Option

Wheels & Tires

Part #	Description	Fitment
B7-011NBA (opens in new tab)	4.5mm Clamping Wheel Hex Hub w Spacers (2)	Option
RP-6113B6A	5-Spoke Drift Wheel, 6mm Offset (Black, 2)	Option
RP-6113B8A	5-Spoke Drift Wheel, 8mm Offset (Black, 2)	Option
RP-6113W6A	5-Spoke Drift Wheel, 6mm Offset (White, 2)	Option
RP-6113W8A	5-Spoke Drift Wheel, 8mm Offset (White, 2)	Option
RP-6213B6A	6-Spoke Drift Wheel, 6mm Offset (Black, 2)	Option
RP-6213B8A (opens in new tab)	12mm Hex Racing Performer Drift Wheels Black (2)	Option
RP-6213W6A	6-Spoke Drift Wheel, 6mm Offset (White, 2)	Option
RP-6213W8A	6-Spoke Drift Wheel, 8mm Offset (White, 2)	Option
RP-6313T6A (opens in new tab)	12mm Hex Racing Performer High Traction RWD Drift Wheels Titanium (2)	Option
RP-6313W6A (opens in new tab)	12mm Hex Racing Performer High Traction RWD Drift Wheels White (2)	Option
RP-6313Y6A (opens in new tab)	12mm Hex Racing Performer High Traction RWD Drift Wheels Yellow (2)	Option
SD-011A (opens in new tab)	Wheel Pin Nut Set (4)	Kit standard
Y2-011CB5A	5.0mm Clamping Wheel Hub	Option
Y2-011CB6A (opens in new tab)	YD2 6mm Aluminum Clamping Wheel Hexes (2)	Option
Y2-011CB7A (opens in new tab)	12mm Clamping Wheel Hex Hub Adaptors 2 7.0mm	Option
Y2-011CB8A	8.0mm Clamping Wheel Hub	Option
Y2-011CBL5	5.0mm Clamping Wheel Hub (Blue)	Option
Y2-011CBL8	8.0mm Clamping Wheel Hub (Blue)	Option
Y2-011CP5A	5.0mm Clamping Wheel Hub (Purple)	Option
Y2-011CP8A	8.0mm Clamping Wheel Hub (Purple)	Option
Y2-011CR5A	5.0mm Clamping Wheel Hub (Red)	Option
Y2-011CR8A	8.0mm Clamping Wheel Hub (Red)	Option
ZC-BH28TPA (opens in new tab)	1.5x6mm Button Head Hex Screw (8)	Kit standard
ZC-BH310A (opens in new tab)	3x10mm Button Head Hex Screw (10)	Kit standard
ZC-BH330TA	M3 x 30mm Titanium Button Head Hex Screw (2)	Option
ZC-BH35TA	M3 x 5mm Titanium Button Head Hex Screw (5)	Option
ZC-BH38-A (opens in new tab)	3x8mm Button Head Hex Screw (10)	Kit standard
ZC-F38A (opens in new tab)	3x8mm Flat Head Hex Screw (10)	Kit standard
ZR-DRAA (opens in new tab)	DRA Competition Drift Tire 4 for Asphalt Surface	Option
ZR-DRCA (opens in new tab)	DRC Competition Drift Tire 4 for Carpet Surface	Option
ZR-DRTA (opens in new tab)	DRA DRC Drift Tire Mounting Tape	Option
ZS-011H10A	High Traction 1.0mm Wheel Spacer	Option
ZS-011TSBA (opens in new tab)	Hex Hub Tread Adjuster Spacer 4x 0.5mm 4x 1.0mm	Option

Electronics

Part #	Description	Fitment
B9-204A (opens in new tab)	BD9 Antenna Belt Tensioner Mount	Option
D-CFPA	30mm Cooling Fan (Purple)	Option
D-CFRA	30mm Cooling Fan (Red)	Option
D-CFSA	30mm Cooling Fan (Silver)	Option
RD-118 (opens in new tab)	RD2.0 Battery Holder	Kit standard
RP-031A (opens in new tab)	30x30x10mm Racing Performer Cooling Fan	Option
RP-032A (opens in new tab)	40x40x10mm Racing Performer Cooling Fan	Option
RP-033A (opens in new tab)	30x30x10mm Racing Performer Hyper Cooling Fan	Option
Y2-304SMA (opens in new tab)	YD2 Cooling Fan Stay	Option
Y2-304SMBL (opens in new tab)	RD / SD / MD Aluminum Drift Fan Mount Blue	Option
Y2-304SMP (opens in new tab)	RD / SD / MD Aluminum Drift Fan Mount Purple	Option
Y2-304SMR (opens in new tab)	RD / SD / MD Aluminum Drift Fan Mount Red	Option
Y2-REM-PA	Rear ESC Mount Set (Purple)	Option
Y2-REM-RA	Rear ESC Mount Set (Red)	Option
Y2-REMA (opens in new tab)	YD2 Rear ESC Mount	Option

Hardware

Part #	Description	Fitment
RP-041-05A	Precision Titanium M3 x 5mm Button Head Screw	Option
RP-041-06A	Precision Titanium M3 x 6mm Button Head Screw	Option
RP-041-08A	Precision Titanium M3 x 8mm Button Head Screw	Option
RP-041-10A	Precision Titanium M3 x 10mm Button Head Screw	Option
RP-041-12A	Precision Titanium M3 x 12mm Button Head Screw	Option
RP-041-15A	Precision Titanium M3 x 15mm Button Head Screw	Option
RP-041-18A	Precision Titanium M3 x 18mm Button Head Screw	Option
RP-041-20A	Precision Titanium M3 x 20mm Button Head Screw	Option
RP-041061A	Precision Titanium M3 x 6mm Button Head Screw	Option
RP-041081A	Precision Titanium M3 x 8mm Button Head Screw	Option
RP-041101A	Precision Titanium M3 x 10mm Button Head Screw	Option
RP-042-05A	Precision Titanium M3 x 5mm Flat Head Screw	Option
RP-042-06A	Precision Titanium M3 x 6mm Flat Head Screw	Option
RP-042-06BA	Precision Brass M3 x 6mm Flat Head Screw	Option
RP-042-08A	Precision Titanium M3 x 8mm Flat Head Screw	Option
RP-042-08BA	Precision Brass M3 x 8mm Flat Head Screw	Option
RP-042-10A	Precision Titanium M3 x 10mm Flat Head Screw	Option
RP-042-10BA	Precision Brass M3 x 10mm Flat Head Screw	Option
RP-042-12A	Precision Titanium M3 x 12mm Flat Head Screw	Option
RP-042-15A	Precision Titanium M3 x 15mm Flat Head Screw	Option
RP-042-18A	Precision Titanium M3 x 18mm Flat Head Screw	Option
RP-042061A	Precision Titanium M3 x 6mm Flat Head Screw	Option
RP-042081A	Precision Titanium M3 x 8mm Flat Head Screw	Option
RP-042101A	Precision Titanium M3 x 10mm Flat Head Screw	Option
RP-101MHA (opens in new tab)	BD9 2019 High Precision Titanium Rod Ball End 2 Medium 13.0mm	Option
RP-101SHA (opens in new tab)	BD9 2019 High Precision Titanium Rod Ball End 2 Small 11.5mm	Option
RP-110-04A (opens in new tab)	2x4mm High Precision Titanium Button Head Screw (4)	Option
SD-TB16A (opens in new tab)	BD7 16mm Turnbuckle (2)	Kit standard
SD-TB20A (opens in new tab)	20mm Front Turnbuckle (2)	Kit standard
SD-TB25A (opens in new tab)	25mm Steel Turnbuckle (2)	Option
SD-TB27A	27mm Turnbuckle	Kit standard
SD-TB30A (opens in new tab)	BD7 30mm Turnbuckle (2)	Option
SD-TB33A	33mm Turnbuckle	Kit standard
SD-TB75NA (opens in new tab)	75mm Hard Steel Turnbuckle (2)	Option
Y4-010TPA	Joint / 2mm Pin / Screw	Kit standard
ZC-BH24A (opens in new tab)	2x4mm Button Head Screws (10)	Kit standard
ZC-BH310TA (opens in new tab)	3x10mm Titanium Button Head Screw (5)	Option
ZC-BH312A (opens in new tab)	3x12mm Button Head Screw (10)	Kit standard
ZC-BH312TA (opens in new tab)	3x12mm Titanium Button Head Screw (4)	Option
ZC-BH315A	M3 x 15mm Button Head Socket Screw (10)	Kit standard
ZC-BH35A	M3 x 5mm Button Head Socket Screw (10)	Option
ZC-BH36-A (opens in new tab)	3x6mm Button Head Screw (10)	Kit standard
ZC-BH36TA (opens in new tab)	3x6mm Titanium Button Head Screw (5)	Option
ZC-BH38TA (opens in new tab)	3x8mm Titanium Button Head Screw (5)	Option
ZC-F310A (opens in new tab)	3x10mm Flat Head Screw (10)	Kit standard
ZC-F310TA (opens in new tab)	3x10mm Titanium Flat Head Screw (5)	Option
ZC-F312A (opens in new tab)	3x12mm Flat Head Screw (10)	Kit standard
ZC-F312TA (opens in new tab)	3x12mm Titanium Flat Head Screw (4)	Option
ZC-F315A (opens in new tab)	3x15mm Flat Head Screw (10)	Option
ZC-F315TA (opens in new tab)	3x15mm Titanium Flat Head Screw (4)	Option
ZC-F318A	M3 x 18mm Flat Head Socket Screw (8)	Option
ZC-F318TA (opens in new tab)	3x18mm Titanium Flat Head Screw (4)	Option
ZC-F38TA (opens in new tab)	3x8mm Titanium Flat Head Screw (5)	Option
ZC-N3APBKA	3mm Aluminum Plain Nut (Black, 4)	Option
ZC-N3PA (opens in new tab)	3x2.4mm Steel Nut (10)	Option
ZC-N4FBKA (opens in new tab)	4mm Aluminum Serrated Flanged Nut Black (4)	Option
ZC-S36A (opens in new tab)	3x6x0.5mm Steel Washer (10)	Option
ZC-S37A (opens in new tab)	3x7x0.5mm Steel Washer (10)	Kit standard
ZC-SS312A (opens in new tab)	3x12mm Set Screw (10)	Kit standard
ZC-SS33A (opens in new tab)	3x3mm Set Screw (10)	Kit standard
ZC-SS34A (opens in new tab)	3x4mm Set Screw (10)	Kit standard
ZC-TB16T	16mm Titanium Turnbuckle (2)	Option
ZC-TB20T	20mm Titanium Turnbuckle (2)	Option
ZC-TB25T	25mm Titanium Turnbuckle (2)	Option
ZC-TB27T	27mm Titanium Turnbuckle (2)	Option
ZC-TB30T	30mm Titanium Turnbuckle (2)	Option
ZC-TB33T	33mm Titanium Turnbuckle (2)	Option

Tools

Part #	Description	Fitment
SD-TBLA (opens in new tab)	4mm Turnbuckle Wrench	Kit standard
YT-15RTBA	Works Wrench 1.5mm Hex Driver (Black)	Option
YT-15RTRA	Works Wrench 1.5mm Hex Driver (Red)	Option
YT-20RTBA	Works Wrench 2.0mm Hex Driver (Black)	Option
YT-20RTRA	Works Wrench 2.0mm Hex Driver (Red)	Option
YT-25PB5A (opens in new tab)	Racing Pit Bag V 1 10 Hauler Bag	Option
YT-300A (opens in new tab)	Cross Wrench	Option
YT-55RTBA	Works Wrench 5.5mm Nut Driver (Black)	Option
YT-55RTRA	Works Wrench 5.5mm Nut Driver (Red)	Option
YT-70RTBA	Works Wrench 7.0mm Nut Driver (Black)	Option
YT-70RTRA	Works Wrench 7.0mm Nut Driver (Red)	Option
YT-CGPA (opens in new tab)	Pro Camber Gauge Black	Option
YT-CGPBA	Camber Gauge Pro (Blue)	Option
YT-HGTCA	Height Gauge for Touring Car	Option
YT-RSBA	Racing Maintenance Stand (Smoke)	Option
YT-YRTSBA	Works Wrench Set, Hex / Nut (Black)	Option
YT-YRTSRA (opens in new tab)	4piece Metric Hex Nut Driver Tool Set	Option

Aftermarket upgrades

Non-Yokomo parts sold for this platform. Their makers list them for the YD-2, which the Yokomo RD2.0 shares most of its geometry with — check fitment against your own car before buying, because Yokomo does not list these and we have not verified them on one.

Brand	Part	Price
FastEddy	FastEddy Yokomo YD-2 Sealed Bearing Kit (opens in new tab)	$23.99
Reve D	Reve D SG Bell Crank Set for Bell Crank (Yokomo YD-2) (opens in new tab)	$84.00
Reve D	Reve D SG Bell Crank Set for Slide Rack (Yokomo YD-2) (opens in new tab)	$130.00
Scale Reflex	Scale Reflex Carbon Rear ESC Plate (YD2/RMX/GALM) (opens in new tab)	$13.99
Scale Reflex	Scale Reflex YD2 Aluminum Rear Bumper (Black) (opens in new tab)	$49.99
Scale Reflex	Scale Reflex YD2 Aluminum Shim Kit (Black) (opens in new tab)	$14.99
Scale Reflex	Scale Reflex YD2 Inner Titanium Hinge Pin Set (4) (Front/Rear) (opens in new tab)	$28.99
Scale Reflex	Scale Reflex YD2 Rear Aluminum Bumper (Green) (opens in new tab)	$49.99
Scale Reflex	Scale Reflex YD2 Rear Aluminum Bumper (Purple) (opens in new tab)	$49.99
Scale Reflex	Scale Reflex YD2 Rear Aluminum Bumper (Red) (opens in new tab)	$49.99
Scale Reflex	Scale Reflex YD2/RMX Carbon Fiber Body Post Brace (opens in new tab)	$15.99
SmithBuilt Scale Designs	SmithBuilt Scale Designs Yokomo YD2 Seat Mount (opens in new tab)	$8.99
Usukani	Usukani Aluminum Spur Gear Adapter (PDS/YD-2) (opens in new tab)	$9.99
Usukani	Usukani Body Mount Set (PDS/YD-2) (opens in new tab)	$15.99
Usukani	Usukani YD-2 Ceramic Coated Aluminum Rear Spool Solid Axle Set (opens in new tab)	$37.99
Usukani	Usukani Yokomo YD-2 3mm Carbon Fiber Chassis (opens in new tab)	$67.99
Usukani	Usukani Yokomo YD-2 Carbon Fiber Upper Deck (High Traction Version) (opens in new tab)	$31.99
Usukani	Usukani Yokomo YD-2 Carbon Fiber Upper Deck (Stiff Version) (opens in new tab)	$37.99
Yeah Racing	Yeah Racing YD-2 Aluminum Track Width Adjustable Low Profile Rear Suspension Arm (opens in new tab)	$29.49
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Adjustable Large Angle Universal Shaft (opens in new tab)	$25.99
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Adjustable Low Profile Front Arm (Black) (opens in new tab)	$29.49
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Adjustable Rear Shock Tower (Black) (opens in new tab)	$19.99
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum High CG Motor Mount Plate (Black) (opens in new tab)	$18.75
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Low Profile Adjustable Front Shock Tower (Black) (opens in new tab)	$18.75
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Low Profile Front Upper Arm (Black) (opens in new tab)	$23.49
Yeah Racing	Yeah Racing Yokomo YD-2 Aluminum Performance Upgrade Kit (opens in new tab)	$172.99
Yeah Racing	Yeah Racing Yokomo YD-2 RWD Large Angle Steering Rack (Black) (opens in new tab)	$32.99