Ask Miles, our Setup AI that’s been trained on the Outlaw 4.
Setup from Points race
High Grip Setup
Stock gearing for the Custom Works Outlaw 4, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 19T | 4.26 | 11.13 |
| 20T | 4.05 | 10.57 |
| 21T | 3.86 | 10.07 |
| 22T | 3.68 | 9.61 |
| 23T | 3.52 | 9.19 |
| 24T | 3.38 | 8.81 |
| 25T | 3.24 | 8.46 |
| 26T | 3.12 | 8.13 |
| 27T | 3.00 | 7.83 |
| 28T | 2.89 | 7.55 |
| 29T | 2.79 | 7.29 |
| 30T | 2.70 | 7.05 |
| 31T | 2.61 | 6.82 |
| 32T | 2.53 | 6.61 |
Shaded rows are the pinions most 1/10 2WD sprint setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Custom Works Outlaw 4, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 2WD sprint class, racers gear by final drive ratio: 7.5–8.5T near 8.13. On the Outlaw 4's stock 81T spur that is about 26T for 7.5–8.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Outlaw 4 selected.
The Outlaw 4 has an internal ratio of 2.61:1. Final drive ratio = spur ÷ pinion × 2.61. With the stock 81T spur, a 19T pinion gives an FDR of 11.13 and a 32T gives 6.61.
81 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Free to start · iOS & Android
Your Custom Works Outlaw 4 is in the RC Setup App
Save every setup change you make to your Custom Works Outlaw 4, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

