Have a setup for the Assault 2026?
Share your setup sheet with the community — we'll fill in the details automatically.
Stock gearing for the GFRP Assault 2026, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR | Rollout |
|---|---|---|---|
| 18T | 4.50 | 11.70 | 18.4 mm |
| 19T | 4.26 | 11.08 | 19.4 mm |
| 20T | 4.05 | 10.53 | 20.5 mm |
| 21T | 3.86 | 10.03 | 21.5 mm |
| 22T | 3.68 | 9.57 | 22.5 mm |
| 23T | 3.52 | 9.16 | 23.5 mm |
| 24T | 3.38 | 8.78 | 24.6 mm |
| 25T | 3.24 | 8.42 | 25.6 mm |
| 26T | 3.12 | 8.10 | 26.6 mm |
| 27T | 3.00 | 7.80 | 27.6 mm |
| 28T | 2.89 | 7.52 | 28.7 mm |
| 29T | 2.79 | 7.26 | 29.7 mm |
Shaded rows are the pinions most 1/10 2WD late model setups run on the stock spur. Rollout at a 68.6 mm tire.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the GFRP Assault 2026, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →It depends on your motor and the track. Racers in the 1/10 2WD late model class run a 20–27 tooth pinion in most setups, usually on a 81T spur for a final drive ratio near 8.81. Hotter motors (lower turns, higher KV) take a smaller pinion; tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Assault 2026 selected.
The Assault 2026 has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 81T spur, a 18T pinion gives an FDR of 11.70 and a 29T gives 7.26.
81 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Free to start · iOS & Android
Your GFRP Assault 2026 is in the RC Setup App
Save every setup change you make to your GFRP Assault 2026, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

