Setups
Have a setup for the Ignite Design T6.2 Nitro?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Team Associated Ignite Design T6.2 Nitro, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 16T | 4.00 | 10.40 |
| 17T | 3.76 | 9.79 |
| 18T | 3.56 | 9.24 |
| 19T | 3.37 | 8.76 |
| 20T | 3.20 | 8.32 |
| 21T | 3.05 | 7.92 |
| 22T | 2.91 | 7.56 |
| 23T | 2.78 | 7.23 |
| 24T | 2.67 | 6.93 |
| 25T | 2.56 | 6.66 |
| 26T | 2.46 | 6.40 |
| 27T | 2.37 | 6.16 |
| 28T | 2.29 | 5.94 |
| 29T | 2.21 | 5.74 |
| 30T | 2.13 | 5.55 |
Shaded rows are the pinions most 1/10 2WD truck setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Team Associated Ignite Design T6.2 Nitro, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Team Associated Ignite Design T6.2 Nitro?
It depends on your motor and the track. In the 1/10 2WD truck class, racers gear by final drive ratio: 7.5–8.5T near 10.14, 13.5T near 8.27. On the Ignite Design T6.2 Nitro's stock 64T spur that is about 16T for 7.5–8.5T, 20T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Ignite Design T6.2 Nitro selected.
What is the internal ratio (transmission ratio) of the Team Associated Ignite Design T6.2 Nitro?
The Ignite Design T6.2 Nitro has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 64T spur, a 16T pinion gives an FDR of 10.40 and a 30T gives 5.55.
How many teeth is the stock spur gear on the Team Associated Ignite Design T6.2 Nitro?
64 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup (T6.2 Base). Part numbers link to AMain.
- Front
- 30 wt
- Rear
- 30 wt
What shock oil does the Team Associated Ignite Design T6.2 Nitro come with?
Out of the box the Ignite Design T6.2 Nitro runs 30 wt front, 30 wt rear (Team Associated oil), on 2 x 1.6mm FT v2 (#91626) front, 2 x 1.7mm FT v2 (#91627) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Team Associated Ignite Design T6.2 Nitro come with?
The kit springs are 4.45lb Grey (#91637) front, 2.40lb White (#91640) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All 1/10 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Team Associated Ignite Design T6.2 Nitro is in the RC Setup App
Save every setup change you make to your Team Associated Ignite Design T6.2 Nitro, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
