IFB8

Infinity IFB8

Q&A, gearing, kit settings, manual, and guides

Off-road•Buggy•1/8 scale•4WD•Nitro

Ask Miles, our Setup AI that’s been trained on the IFB8.

Setups

Get IFB8 alerts
Be the first to share a setup for the IFB8
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the Infinity IFB8, with common pinions and their ratios.

Stock spur
46T
Internal ratio
3.308:1
Typical pinion
1800–2300 Kv ≈ 15T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.8312.68
13T3.5411.71
14T3.2910.87
15T3.0710.14
16T2.889.51
17T2.718.95
18T2.568.45
19T2.428.01

Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Infinity IFB8, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Infinity IFB8?

It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the IFB8's stock 46T spur that is about 15T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the IFB8 selected.

What is the internal ratio (transmission ratio) of the Infinity IFB8?

The IFB8 has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 46T spur, a 12T pinion gives an FDR of 12.68 and a 19T gives 8.01.

How many teeth is the stock spur gear on the Infinity IFB8?

46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
550 cst
Rear
500 cst
Springs
Front
Med 6.67T #M139 →
Rear
Soft 10T #M143 →
Pistons
Front
5 x 1.4mm
Rear
5 x 1.4mm

What shock oil does the Infinity IFB8 come with?

Out of the box the IFB8 runs 550 cst front, 500 cst rear, on 5 x 1.4mm front, 5 x 1.4mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Infinity IFB8 come with?

The kit springs are Med 6.67T (#M139) front, Soft 10T (#M143) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Infinity IFB8 is in the RC Setup App

Save every setup change you make to your Infinity IFB8, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use