Setups
Have a setup for the Inferno MP10?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Kyosho Inferno MP10, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 3.83 | 12.69 |
| 13T | 3.54 | 11.71 |
| 14T | 3.29 | 10.88 |
| 15T | 3.07 | 10.15 |
| 16T | 2.88 | 9.52 |
| 17T | 2.71 | 8.96 |
| 18T | 2.56 | 8.46 |
Shaded rows are the pinions most 1/8 4WD truck setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Kyosho Inferno MP10, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Kyosho Inferno MP10?
It depends on your motor and the track. In the 1/8 4WD truck class, racers gear by final drive ratio: 1800–2300 kV near 13.97. On the Inferno MP10's stock 46T spur that is about 11T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Inferno MP10 selected.
What is the internal ratio (transmission ratio) of the Kyosho Inferno MP10?
The Inferno MP10 has an internal ratio of 3.31:1. Final drive ratio = spur ÷ pinion × 3.31. With the stock 46T spur, a 12T pinion gives an FDR of 12.69 and a 18T gives 8.46.
How many teeth is the stock spur gear on the Kyosho Inferno MP10?
46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 70mm Grey #IF350-6514 →
- Rear
- 84mm Light blue #IS106-814 →
- Front
- 8 x 1.3mm #IF347-138 →
- Rear
- 8 x 1.3mm #IF347-138 →
- Front
- 5,000 cst
- Center
- 5,000 cst
- Rear
- 3,000 cst
What springs does the Kyosho Inferno MP10 come with?
The kit springs are 70mm Grey (#IF350-6514) front, 84mm Light blue (#IS106-814) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the Kyosho Inferno MP10 come with?
The kit diff fluid is 5,000 cst front, 5,000 cst center, 3,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All 1/8 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Kyosho Inferno MP10 is in the RC Setup App
Save every setup change you make to your Kyosho Inferno MP10, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
