Ask Miles, our Setup AI that’s been trained on the FXX 2.0/S.
Stock gearing for the MST FXX 2.0/S, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 17T | 1.76 | 5.29 |
| 18T | 1.67 | 5.00 |
| 19T | 1.58 | 4.74 |
| 20T | 1.50 | 4.50 |
| 21T | 1.43 | 4.29 |
| 22T | 1.36 | 4.09 |
| 23T | 1.30 | 3.91 |
| 24T | 1.25 | 3.75 |
| 25T | 1.20 | 3.60 |
| 26T | 1.15 | 3.46 |
| 27T | 1.11 | 3.33 |
| 28T | 1.07 | 3.21 |
Shaded rows are the pinions most 1/10 2WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the MST FXX 2.0/S, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 2WD touring/gt class, racers gear by final drive ratio: 13.5T near 9.80. On the FXX 2.0/S's stock 30T spur that is about 9T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the FXX 2.0/S selected.
The FXX 2.0/S has an internal ratio of 3:1. Final drive ratio = spur ÷ pinion × 3. With the stock 30T spur, a 17T pinion gives an FDR of 5.29 and a 28T gives 3.21.
30 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
Out of the box the FXX 2.0/S runs 10 wt front, 10 wt rear, on 3 x 1.2mm front, 3 x 1.2mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are Silver (#820103-2) front, Purple-yellow (#820104-4) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your MST FXX 2.0/S is in the RC Setup App
Save every setup change you make to your MST FXX 2.0/S, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

