Ask Miles, our Setup AI, trained on the So Dialed setup guide database.
Stock gearing for the MST RMX 3.0, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 17T | 5.06 | 15.18 |
| 18T | 4.78 | 14.33 |
| 19T | 4.53 | 13.58 |
| 20T | 4.30 | 12.90 |
| 21T | 4.10 | 12.29 |
| 22T | 3.91 | 11.73 |
| 23T | 3.74 | 11.22 |
| 24T | 3.58 | 10.75 |
| 25T | 3.44 | 10.32 |
| 26T | 3.31 | 9.92 |
| 27T | 3.19 | 9.56 |
| 28T | 3.07 | 9.21 |
Shaded rows are the pinions most 1/10 2WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the MST RMX 3.0, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 2WD touring/gt class, racers gear by final drive ratio: 13.5T near 9.80. On the RMX 3.0's stock 86T spur that is about 26T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RMX 3.0 selected.
The RMX 3.0 has an internal ratio of 3:1. Final drive ratio = spur ÷ pinion × 3. With the stock 86T spur, a 17T pinion gives an FDR of 15.18 and a 28T gives 9.21.
86 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Free to start · iOS & Android
Track your setups in the RC Setup App
Save your settings for 780+ cars, get personalized AI tuning answers for your exact car, and log your races — at the track or back in the pits.

