Ask Miles, our Setup AI that’s been trained on the RMX EX GT.
Stock gearing for the MST RMX EX GT, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 17T | 5.18 | 15.53 |
| 18T | 4.89 | 14.67 |
| 19T | 4.63 | 13.89 |
| 20T | 4.40 | 13.20 |
| 21T | 4.19 | 12.57 |
| 22T | 4.00 | 12.00 |
| 23T | 3.83 | 11.48 |
| 24T | 3.67 | 11.00 |
| 25T | 3.52 | 10.56 |
| 26T | 3.38 | 10.15 |
| 27T | 3.26 | 9.78 |
| 28T | 3.14 | 9.43 |
Shaded rows are the pinions most 1/10 2WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the MST RMX EX GT, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 2WD touring/gt class, racers gear by final drive ratio: 13.5T near 9.80. On the RMX EX GT's stock 88T spur that is about 27T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RMX EX GT selected.
The RMX EX GT has an internal ratio of 3:1. Final drive ratio = spur ÷ pinion × 3. With the stock 88T spur, a 17T pinion gives an FDR of 15.53 and a 28T gives 9.43.
88 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
Out of the box the RMX EX GT runs 10 wt front, 10 wt rear, on 3 x 1.0mm front, 6 x 0.8mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are 26mm 6.55T Green front, 28mm 9T Purple-Green rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your MST RMX EX GT is in the RC Setup App
Save every setup change you make to your MST RMX EX GT, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

