RMX EX S PRO

MST RMX EX S PRO

Q&A, gearing, kit settings, manual, and guides

Drift•Touring/GT•1/10 scale•2WD

Ask Miles, our Setup AI that’s been trained on the RMX EX S PRO.

Setups

Get RMX EX S PRO alerts
Be the first to share a setup for the RMX EX S PRO
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the MST RMX EX S PRO, with common pinions and their ratios.

Stock spur
80T
Internal ratio
3:1
Typical pinion
13.5T ≈ 24T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
17T4.7114.12
18T4.4413.33
19T4.2112.63
20T4.0012.00
21T3.8111.43
22T3.6410.91
23T3.4810.43
24T3.3310.00
25T3.209.60
26T3.089.23
27T2.968.89
28T2.868.57

Shaded rows are the pinions most 1/10 2WD touring/gt setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the MST RMX EX S PRO, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the MST RMX EX S PRO?

It depends on your motor and the track. In the 1/10 2WD touring/gt class, racers gear by final drive ratio: 13.5T near 9.80. On the RMX EX S PRO's stock 80T spur that is about 24T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RMX EX S PRO selected.

What is the internal ratio (transmission ratio) of the MST RMX EX S PRO?

The RMX EX S PRO has an internal ratio of 3:1. Final drive ratio = spur ÷ pinion × 3. With the stock 80T spur, a 17T pinion gives an FDR of 14.12 and a 28T gives 8.57.

How many teeth is the stock spur gear on the MST RMX EX S PRO?

80 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
10 wt
Rear
10 wt
Springs
Front
26mm 6.55T Green
Rear
28mm 9T Purple-Green
Pistons
Front
3 x 1.2mm
Rear
3 x 1.2mm

What shock oil does the MST RMX EX S PRO come with?

Out of the box the RMX EX S PRO runs 10 wt front, 10 wt rear, on 3 x 1.2mm front, 3 x 1.2mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the MST RMX EX S PRO come with?

The kit springs are 26mm 6.55T Green front, 28mm 9T Purple-Green rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your MST RMX EX S PRO is in the RC Setup App

Save every setup change you make to your MST RMX EX S PRO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use