S1V3R EVO

PR Racing S1V3R EVO

Q&A, setups, gearing, kit settings, and guides

Off-road•Buggy•1/10 scale•2WD

Ask Miles, our Setup AI that’s been trained on the S1V3R EVO.

Setups

Get S1V3R EVO alerts

Gearing

Stock gearing for the PR Racing S1V3R EVO, with common pinions and their ratios.

Stock spur
81T
Internal ratio
2.75:1
Typical pinion
≤6T ≈ 24T · 7.5–8.5T ≈ 24T · 17.5T ≈ 34T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
18T4.5012.38
19T4.2611.72
20T4.0511.14
21T3.8610.61
22T3.6810.13
23T3.529.68
24T3.389.28
25T3.248.91
26T3.128.57
27T3.008.25
28T2.897.96
29T2.797.68
30T2.707.43
31T2.617.19
32T2.536.96

Shaded rows are the pinions most 1/10 2WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the PR Racing S1V3R EVO, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the PR Racing S1V3R EVO?

It depends on your motor and the track. In the 1/10 2WD buggy class, racers gear by final drive ratio: 6T and below near 9.40, 7.5–8.5T near 9.22, 17.5T near 6.48. On the S1V3R EVO's stock 81T spur that is about 24T for 6T and below, 24T for 7.5–8.5T, 34T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the S1V3R EVO selected.

What is the internal ratio (transmission ratio) of the PR Racing S1V3R EVO?

The S1V3R EVO has an internal ratio of 2.75:1. Final drive ratio = spur ÷ pinion × 2.75. With the stock 81T spur, a 18T pinion gives an FDR of 12.38 and a 32T gives 6.96.

How many teeth is the stock spur gear on the PR Racing S1V3R EVO?

81 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Springs
Front
Green 4.20lb #02530016 →
Rear
Red 2.40lb #02500076 →
Pistons
Front
3 x 1.5mm machined #17430046 →
Rear
3 x 1.7mm machined #17430076 →

What springs does the PR Racing S1V3R EVO come with?

The kit springs are Green 4.20lb (#02530016) front, Red 2.40lb (#02500076) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your PR Racing S1V3R EVO is in the RC Setup App

Save every setup change you make to your PR Racing S1V3R EVO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use