RDS

Redcat RDS

Q&A, gearing, kit settings, manual, and guides

On-road•Touring/GT•1/10 scale•2WD

Ask Miles, our Setup AI that’s been trained on the RDS.

Setups

Get RDS alerts
Be the first to share a setup for the RDS
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the Redcat RDS, with common pinions and their ratios.

Stock spur
88T
Internal ratio
2.6:1
Class
1/10 2WD touring/gt
No class gearing data yet
PinionSpur ÷ pinionFDR
15T5.8715.25
16T5.5014.30
17T5.1813.46
18T4.8912.71
19T4.6312.04
20T4.4011.44
21T4.1910.90
22T4.0010.40
23T3.839.95
24T3.679.53
25T3.529.15
26T3.388.80
27T3.268.47
28T3.148.17
29T3.037.89
30T2.937.63
31T2.847.38
32T2.757.15
33T2.676.93
34T2.596.73
35T2.516.54

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Redcat RDS, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Redcat RDS?

It depends on your motor and the track. A hotter motor (lower turns, higher Kv) takes a smaller pinion; a tight track wants a lower gear than an open one. Start near the middle of the pinions the RDS shipped with, run a few minutes, and check motor temperature before going up a tooth. The So Dialed Pinion Recommender gives a starting pinion for your motor where we have class data.

What is the internal ratio (transmission ratio) of the Redcat RDS?

The RDS has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 88T spur, a 15T pinion gives an FDR of 15.25 and a 35T gives 6.54.

How many teeth is the stock spur gear on the Redcat RDS?

88 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup (Low-grip polished concrete). Part numbers link to AMain.

Shock oil
Front
20 wt
Rear
25 wt
Springs
Front
Kit #15024 →
Rear
34mm 12T
Pistons
Front
6 x 1.6mm
Rear
6 x 1.6mm

What shock oil does the Redcat RDS come with?

Out of the box the RDS runs 20 wt front, 25 wt rear, on 6 x 1.6mm front, 6 x 1.6mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Redcat RDS come with?

The kit springs are Kit (#15024) front, 34mm 12T rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Redcat RDS is in the RC Setup App

Save every setup change you make to your Redcat RDS, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use