SRX8 EVO

Serpent SRX8 EVO

Q&A, gearing, kit settings, and guides

Off-road•Buggy•1/8 scale•4WD•Nitro

Ask Miles, our Setup AI that’s been trained on the SRX8 EVO.

Best Gear Calculator App

Calculate your ratio, FDR, pill insert geometry, corner weights, and more!

Get App

Setups

Get SRX8 EVO alerts
Be the first to share a setup for the SRX8 EVO
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the Serpent SRX8 EVO, with common pinions and their ratios.

Stock spur
46T
Internal ratio
3.385:1
Typical pinion
1800–2300 Kv ≈ 15T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.8312.98
13T3.5411.98
14T3.2911.12
15T3.0710.38
16T2.889.73
17T2.719.16
18T2.568.65
19T2.428.20

Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Serpent SRX8 EVO, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Serpent SRX8 EVO?

It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the SRX8 EVO's stock 46T spur that is about 15T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SRX8 EVO selected.

What is the internal ratio (transmission ratio) of the Serpent SRX8 EVO?

The SRX8 EVO has an internal ratio of 3.385:1. Final drive ratio = spur ÷ pinion × 3.385. With the stock 46T spur, a 12T pinion gives an FDR of 12.98 and a 19T gives 8.20.

How many teeth is the stock spur gear on the Serpent SRX8 EVO?

46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
500 cst
Rear
300 cst
Serpent oil
Springs
Front
4.9 lb Pink #600856 →
Rear
3.4 lb Pink #600863 →
Pistons
Front
6 holes #600818 →
Rear
6 holes #600818 →
Diff fluid
Front
7,000 cst
Center
5,000 cst
Rear
5,000 cst

What shock oil does the Serpent SRX8 EVO come with?

Out of the box the SRX8 EVO runs 500 cst front, 300 cst rear (Serpent oil), on 6 holes (#600818) front, 6 holes (#600818) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Serpent SRX8 EVO come with?

The kit springs are 4.9 lb Pink (#600856) front, 3.4 lb Pink (#600863) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

What diff fluid does the Serpent SRX8 EVO come with?

The kit diff fluid is 7,000 cst front, 5,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Serpent SRX8 EVO is in the RC Setup App

Save every setup change you make to your Serpent SRX8 EVO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use