Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the RC10 T7?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Team Associated RC10 T7, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 16T | 5.06 | 13.16 |
| 17T | 4.76 | 12.39 |
| 18T | 4.50 | 11.70 |
| 19T | 4.26 | 11.08 |
| 20T | 4.05 | 10.53 |
| 21T | 3.86 | 10.03 |
| 22T | 3.68 | 9.57 |
| 23T | 3.52 | 9.16 |
| 24T | 3.38 | 8.78 |
| 25T | 3.24 | 8.42 |
| 26T | 3.12 | 8.10 |
| 27T | 3.00 | 7.80 |
| 28T | 2.89 | 7.52 |
| 29T | 2.79 | 7.26 |
| 30T | 2.70 | 7.02 |
Shaded rows are the pinions most 1/10 2WD truck setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Team Associated RC10 T7, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Team Associated RC10 T7?
It depends on your motor and the track. In the 1/10 2WD truck class, racers gear by final drive ratio: 7.5–8.5T near 10.14, 13.5T near 8.27. On the RC10 T7's stock 81T spur that is about 21T for 7.5–8.5T, 25T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RC10 T7 selected.
What is the internal ratio (transmission ratio) of the Team Associated RC10 T7?
The RC10 T7 has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 81T spur, a 16T pinion gives an FDR of 13.16 and a 30T gives 7.02.
How many teeth is the stock spur gear on the Team Associated RC10 T7?
81 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 30 wt
- Rear
- 30 wt
What shock oil does the Team Associated RC10 T7 come with?
Out of the box the RC10 T7 runs 30 wt front, 30 wt rear (Team Associated oil), on 2.5mm 2x1.7mm holes (#91933) front, 2.5mm 2x1.9mm holes (#92428) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Team Associated RC10 T7 come with?
The kit springs are 4.6lb Purple (#91946) front, 2.0lb Gray (#91949) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All 1/10 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Team Associated RC10 T7 is in the RC Setup App
Save every setup change you make to your Team Associated RC10 T7, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
