RC8 B4

Team Associated RC8 B4 Setups

Off-roadBuggy1/8 scale4WDNitro

Best Gear Calculator App

Calculate your ratio, FDR, pill insert geometry, corner weights, and more!

Get App

Setups

Get RC8 B4 alerts
Hj Vh
TNR A-Main Challenge - 01/22/2023 by Driver, February 02, 2023
Track
Unknown Track
Outdoor Dirt
Low-Medium/Low grip
Date
Jun 21, 2025
Dylan Manchanda
Team Associated
LCRC Raceway
4
5
Track
LCRC Raceway
Outdoor Hard-Packed
Medium grip
Date
Sep 30, 2023
Dylan Manchanda
Team Associated
Trains and Lanes
3
3
Track
Trains & Lanes
Outdoor Clay
Medium/High grip
Event
Stars and Stripes
Jul 4, 2023
Gian DiGiovine
My Base Setup sb
Track
S&b
Outdoor Clay
Medium grip
Event
Sos warm up
May 22, 2023
Vin Manchanda
Team Associated
My Base Setup
3
Track
MotoFarm
Outdoor Clay
Medium grip
Date
Dec 3, 2022
Dylan Manchanda
Team Associated
LCRC Raceway 9/16/22
1
Track
LCRC Raceway
Outdoor Hard-Packed
Medium grip
Date
Dec 3, 2022

Have a setup for the RC8 B4?

Share your setup sheet with the community — we'll fill in the details automatically.

Submit a setup →

Gearing

Stock gearing for the Team Associated RC8 B4, with common pinions and their ratios.

Stock spur
46T
Internal ratio
3.5:1
Typical pinion
1800–2300 kV ≈ 16T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.8313.42
13T3.5412.38
14T3.2911.50
15T3.0710.73
16T2.8810.06
17T2.719.47
18T2.568.94
19T2.428.47

Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Team Associated RC8 B4, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain →

What pinion gear should I use on the Team Associated RC8 B4?

It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 kV near 10.06. On the RC8 B4's stock 46T spur that is about 16T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RC8 B4 selected.

What is the internal ratio (transmission ratio) of the Team Associated RC8 B4?

The RC8 B4 has an internal ratio of 3.5:1. Final drive ratio = spur ÷ pinion × 3.5. With the stock 46T spur, a 12T pinion gives an FDR of 13.42 and a 19T gives 8.47.

How many teeth is the stock spur gear on the Team Associated RC8 B4?

46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup (Manual). Part numbers link to AMain.

Shock oil
Front
45 wt
Rear
40 wt
Team Associated oil
Springs
Front
5.5lb Blue #81225
Rear
4.0lb Green #81236
Pistons
Front
8x1.2mm tapered
Rear
8x1.2mm tapered
Diff fluid
Front
5,000 cst
Center
10,000 cst
Rear
5,000 cst

What shock oil does the Team Associated RC8 B4 come with?

Out of the box the RC8 B4 runs 45 wt front, 40 wt rear (Team Associated oil), on 8x1.2mm tapered front, 8x1.2mm tapered rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Team Associated RC8 B4 come with?

The kit springs are 5.5lb Blue (#81225) front, 4.0lb Green (#81236) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

What diff fluid does the Team Associated RC8 B4 come with?

The kit diff fluid is 5,000 cst front, 10,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.

RC Setup App icon

Free to start · iOS & Android

Setup App & Race Log

Your Team Associated RC8 B4 is in the RC Setup App

Save every setup change you make to your Team Associated RC8 B4, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use