Reflex 14B

Team Associated Reflex 14B

Q&A, gearing, kit settings, manual, and guides

Off-road•Buggy•1/14 scale•4WD

Ask Miles, our Setup AI that’s been trained on the Reflex 14B.

Setups

Get Reflex 14B alerts
Be the first to share a setup for the Reflex 14B
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the Team Associated Reflex 14B, with common pinions and their ratios.

Stock spur
58T
Internal ratio
2.467:1
Class
1/14 4WD buggy
No class gearing data yet
PinionSpur ÷ pinionFDR
15T3.879.54
16T3.638.94
17T3.418.42
18T3.227.95
19T3.057.53
20T2.907.15
21T2.766.81
22T2.646.50
23T2.526.22
24T2.425.96
25T2.325.72
26T2.235.50
27T2.155.30
28T2.075.11
29T2.004.93
30T1.934.77
31T1.874.62
32T1.814.47
33T1.764.34
34T1.714.21
35T1.664.09

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Team Associated Reflex 14B, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Team Associated Reflex 14B?

It depends on your motor and the track. A hotter motor (lower turns, higher Kv) takes a smaller pinion; a tight track wants a lower gear than an open one. Start near the middle of the pinions the Reflex 14B shipped with, run a few minutes, and check motor temperature before going up a tooth. The So Dialed Pinion Recommender gives a starting pinion for your motor where we have class data.

What is the internal ratio (transmission ratio) of the Team Associated Reflex 14B?

The Reflex 14B has an internal ratio of 2.467:1. Final drive ratio = spur ÷ pinion × 2.467. With the stock 58T spur, a 15T pinion gives an FDR of 9.54 and a 35T gives 4.09.

How many teeth is the stock spur gear on the Team Associated Reflex 14B?

58 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
30 wt
Rear
30 wt
Springs
Front
2.25lb #21533 →
Rear
2.25lb #21533 →
Pistons
Front
3-hole #21537 →
Rear
3-hole #21537 →

What shock oil does the Team Associated Reflex 14B come with?

Out of the box the Reflex 14B runs 30 wt front, 30 wt rear, on 3-hole (#21537) front, 3-hole (#21537) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Team Associated Reflex 14B come with?

The kit springs are 2.25lb (#21533) front, 2.25lb (#21533) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Team Associated Reflex 14B is in the RC Setup App

Save every setup change you make to your Team Associated Reflex 14B, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use