Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the SC10.2?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Team Associated SC10.2, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 15T | 5.60 | 14.56 |
| 16T | 5.25 | 13.65 |
| 17T | 4.94 | 12.85 |
| 18T | 4.67 | 12.13 |
| 19T | 4.42 | 11.49 |
| 20T | 4.20 | 10.92 |
| 21T | 4.00 | 10.40 |
| 22T | 3.82 | 9.93 |
| 23T | 3.65 | 9.50 |
| 24T | 3.50 | 9.10 |
| 25T | 3.36 | 8.74 |
| 26T | 3.23 | 8.40 |
| 27T | 3.11 | 8.09 |
| 28T | 3.00 | 7.80 |
| 29T | 2.90 | 7.53 |
| 30T | 2.80 | 7.28 |
Shaded rows are the pinions most 1/10 2WD short course truck setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Team Associated SC10.2, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Team Associated SC10.2?
It depends on your motor and the track. In the 1/10 2WD short course truck class, racers gear by final drive ratio: 7.5–8.5T near 10.14, 13.5T near 8.94. On the SC10.2's stock 84T spur that is about 22T for 7.5–8.5T, 24T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SC10.2 selected.
What is the internal ratio (transmission ratio) of the Team Associated SC10.2?
The SC10.2 has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 84T spur, a 15T pinion gives an FDR of 14.56 and a 30T gives 7.28.
How many teeth is the stock spur gear on the Team Associated SC10.2?
84 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 35 wt
- Rear
- 35 wt
- Front
- 2 x 1.6mm
- Rear
- 2 x 1.7mm
What shock oil does the Team Associated SC10.2 come with?
Out of the box the SC10.2 runs 35 wt front, 35 wt rear (Team Associated oil), on 2 x 1.6mm front, 2 x 1.7mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Team Associated SC10.2 come with?
The kit springs are 12mm 3.45lb Gray (#91329) front, 12mm 2.10lb White (#91337) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All Short Course Trucks →
Free to start · iOS & Android
Setup App & Race Log
Your Team Associated SC10.2 is in the RC Setup App
Save every setup change you make to your Team Associated SC10.2, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
