Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the JRX-Pro SE?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Team Losi JRX-Pro SE, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 18T | 4.78 | 10.42 |
| 19T | 4.53 | 9.87 |
| 20T | 4.30 | 9.37 |
| 21T | 4.10 | 8.93 |
| 22T | 3.91 | 8.52 |
| 23T | 3.74 | 8.15 |
| 24T | 3.58 | 7.81 |
| 25T | 3.44 | 7.50 |
| 26T | 3.31 | 7.21 |
| 27T | 3.19 | 6.94 |
| 28T | 3.07 | 6.70 |
| 29T | 2.97 | 6.46 |
| 30T | 2.87 | 6.25 |
| 31T | 2.77 | 6.05 |
| 32T | 2.69 | 5.86 |
Shaded rows are the pinions most 1/10 2WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Team Losi JRX-Pro SE, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Team Losi JRX-Pro SE?
It depends on your motor and the track. In the 1/10 2WD buggy class, racers gear by final drive ratio: 6T and below near 9.40, 7.5–8.5T near 9.22, 17.5T near 6.48. On the JRX-Pro SE's stock 86T spur that is about 20T for 6T and below, 20T for 7.5–8.5T, 29T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the JRX-Pro SE selected.
What is the internal ratio (transmission ratio) of the Team Losi JRX-Pro SE?
The JRX-Pro SE has an internal ratio of 2.18:1. Final drive ratio = spur ÷ pinion × 2.18. With the stock 86T spur, a 18T pinion gives an FDR of 10.42 and a 32T gives 5.86.
How many teeth is the stock spur gear on the Team Losi JRX-Pro SE?
86 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 40 wt
- Rear
- 40 wt
What shock oil does the Team Losi JRX-Pro SE come with?
Out of the box the JRX-Pro SE runs 40 wt front, 40 wt rear (Team Losi oil), on Pro SE Teflon (#5012) front, Pro SE Teflon (#5012) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Team Losi JRX-Pro SE come with?
The kit springs are 2” 3.5lb Green (#5132) front, 2.5” 2.6lb Red (#5152) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All 1/10 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Team Losi JRX-Pro SE is in the RC Setup App
Save every setup change you make to your Team Losi JRX-Pro SE, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
