NGE/NGE-PRO

Usukani NGE/NGE-PRO

Q&A, setups, gearing, kit settings, manual, and guides

Drift•Touring/GT•1/10 scale•2WD

Ask Miles, our Setup AI that’s been trained on the NGE/NGE-PRO.

Setups

Get NGE/NGE-PRO alerts

Gearing

Stock gearing for the Usukani NGE/NGE-PRO, with common pinions and their ratios.

Stock spur
96T
Internal ratio
2.89:1
Typical pinion
13.5T ≈ 28T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
17T5.6516.32
18T5.3315.41
19T5.0514.60
20T4.8013.87
21T4.5713.21
22T4.3612.61
23T4.1712.06
24T4.0011.56
25T3.8411.10
26T3.6910.67
27T3.5610.28
28T3.439.91

Shaded rows are the pinions most 1/10 2WD touring/gt setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Usukani NGE/NGE-PRO, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Usukani NGE/NGE-PRO?

It depends on your motor and the track. In the 1/10 2WD touring/gt class, racers gear by final drive ratio: 13.5T near 9.80. On the NGE/NGE-PRO's stock 96T spur that is about 28T for 13.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the NGE/NGE-PRO selected.

What is the internal ratio (transmission ratio) of the Usukani NGE/NGE-PRO?

The NGE/NGE-PRO has an internal ratio of 2.89:1. Final drive ratio = spur ÷ pinion × 2.89. With the stock 96T spur, a 17T pinion gives an FDR of 16.32 and a 28T gives 9.91.

How many teeth is the stock spur gear on the Usukani NGE/NGE-PRO?

96 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup (NGE). Part numbers link to AMain.

Shock oil
Front
100 cst
Rear
100 cst
Springs
Front
DSSP-20 #DSSP-20 →
Rear
DSSP-10 #DSSP-10 →
Pistons
Front
4-hole #PL-135 →
Rear
4-hole #PL-135 →

What shock oil does the Usukani NGE/NGE-PRO come with?

Out of the box the NGE/NGE-PRO runs 100 cst front, 100 cst rear, on 4-hole (#PL-135) front, 4-hole (#PL-135) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Usukani NGE/NGE-PRO come with?

The kit springs are DSSP-20 (#DSSP-20) front, DSSP-10 (#DSSP-10) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Usukani NGE/NGE-PRO is in the RC Setup App

Save every setup change you make to your Usukani NGE/NGE-PRO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use