SBX-1

WIRC SBX-1

Q&A, setups, gearing, kit settings, and guides

Off-road•Buggy•1/8 scale•4WD•Nitro

Ask Miles, our Setup AI that’s been trained on the SBX-1.

Setups

Get SBX-1 alerts

Gearing

Stock gearing for the WIRC SBX-1, with common pinions and their ratios.

Stock spur
46T
Internal ratio
3.54:1
Typical pinion
1800–2300 Kv ≈ 16T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.8313.57
13T3.5412.53
14T3.2911.63
15T3.0710.86
16T2.8810.18
17T2.719.58
18T2.569.05
19T2.428.57

Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the WIRC SBX-1, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the WIRC SBX-1?

It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the SBX-1's stock 46T spur that is about 16T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SBX-1 selected.

What is the internal ratio (transmission ratio) of the WIRC SBX-1?

The SBX-1 has an internal ratio of 3.54:1. Final drive ratio = spur ÷ pinion × 3.54. With the stock 46T spur, a 12T pinion gives an FDR of 13.57 and a 19T gives 8.57.

How many teeth is the stock spur gear on the WIRC SBX-1?

46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
600 cst
Rear
600 cst
P-ONE oil
Springs
Front
Kit #100125 →
Rear
Kit #100126 →
Pistons
Front
8 x 1.3mm
Rear
8 x 1.3mm
Diff fluid
Front
5,000 cst
Center
5,000 cst
Rear
5,000 cst

What shock oil does the WIRC SBX-1 come with?

Out of the box the SBX-1 runs 600 cst front, 600 cst rear (P-ONE oil), on 8 x 1.3mm front, 8 x 1.3mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the WIRC SBX-1 come with?

The kit springs are Kit (#100125) front, Kit (#100126) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

What diff fluid does the WIRC SBX-1 come with?

The kit diff fluid is 5,000 cst front, 5,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your WIRC SBX-1 is in the RC Setup App

Save every setup change you make to your WIRC SBX-1, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use