No setups found
No public setups have been shared for this car model yet.
Have a setup for the One (XB1)?
Share your setup sheet with the community — we'll fill in the details automatically.
Stock gearing for the XBility One (XB1), with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 4T | 14.25 | 14.25 |
| 5T | 11.40 | 11.40 |
| 6T | 9.50 | 9.50 |
| 7T | 8.14 | 8.14 |
| 8T | 7.13 | 7.13 |
| 9T | 6.33 | 6.33 |
| 10T | 5.70 | 5.70 |
| 11T | 5.18 | 5.18 |
| 12T | 4.75 | 4.75 |
| 13T | 4.38 | 4.38 |
| 14T | 4.07 | 4.07 |
| 15T | 3.80 | 3.80 |
| 16T | 3.56 | 3.56 |
Shaded rows are the pinions most 1/24-1/28 2WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the XBility One (XB1), with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →It depends on your motor and the track. Racers in the 1/24-1/28 2WD touring/gt class run a 6–14 tooth pinion in most setups, usually on a 53T spur for a final drive ratio near 5.30. Hotter motors (lower turns, higher Kv) take a smaller pinion; tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the One (XB1) selected.
The One (XB1) has an internal ratio of 1:1. Final drive ratio = spur ÷ pinion × 1. With the stock 57T spur, a 4T pinion gives an FDR of 14.25 and a 16T gives 3.56.
57 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
The kit springs are Med Black side. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your XBility One (XB1) is in the RC Setup App
Save every setup change you make to your XBility One (XB1), get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

