YZ-2 CAL3

Yokomo YZ-2 CAL3

Q&A, setups, gearing, kit settings, manual, and guides

Off-road•Buggy•1/10 scale•2WD

Ask Miles, our Setup AI that’s been trained on the YZ-2 CAL3.

Setups

Get YZ-2 CAL3 alerts

Gearing

Stock gearing for the Yokomo YZ-2 CAL3, with common pinions and their ratios.

Stock spur
80T
Internal ratio
2.6:1
Typical pinion
≤6T ≈ 22T · 7.5–8.5T ≈ 23T · 17.5T ≈ 32T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
18T4.4411.56
19T4.2110.95
20T4.0010.40
21T3.819.90
22T3.649.45
23T3.489.04
24T3.338.67
25T3.208.32
26T3.088.00
27T2.967.70
28T2.867.43
29T2.767.17
30T2.676.93
31T2.586.71
32T2.506.50

Shaded rows are the pinions most 1/10 2WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Yokomo YZ-2 CAL3, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Yokomo YZ-2 CAL3?

It depends on your motor and the track. In the 1/10 2WD buggy class, racers gear by final drive ratio: 6T and below near 9.40, 7.5–8.5T near 9.22, 17.5T near 6.48. On the YZ-2 CAL3's stock 80T spur that is about 22T for 6T and below, 23T for 7.5–8.5T, 32T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the YZ-2 CAL3 selected.

What is the internal ratio (transmission ratio) of the Yokomo YZ-2 CAL3?

The YZ-2 CAL3 has an internal ratio of 2.6:1. Final drive ratio = spur ÷ pinion × 2.6. With the stock 80T spur, a 18T pinion gives an FDR of 11.56 and a 32T gives 6.50.

How many teeth is the stock spur gear on the Yokomo YZ-2 CAL3?

80 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
450 cst
Rear
350 cst
Springs
Front
YA Black #YOKYAS-675 →
Rear
Green (#YOKYS-A1200) - lightest
Pistons
Front
2 x 1.6mm, 2.0mm thick black #S162 →
Rear
2 x 1.8mm, 2.0mm thick black #S182 →

What shock oil does the Yokomo YZ-2 CAL3 come with?

Out of the box the YZ-2 CAL3 runs 450 cst front, 350 cst rear, on 2 x 1.6mm, 2.0mm thick black (#S162) front, 2 x 1.8mm, 2.0mm thick black (#S182) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Yokomo YZ-2 CAL3 come with?

The kit springs are YA Black (#YOKYAS-675) front, Green (#YOKYS-A1200) - lightest rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Yokomo YZ-2 CAL3 is in the RC Setup App

Save every setup change you make to your Yokomo YZ-2 CAL3, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use