The racer asked
Add more rear toe
Miles, So Dialed's RC setup AI
For the EB48 2.2, aim for about 3° rear toe-in as a starting point. More rear toe-in generally adds rear stability and traction, but can make the buggy push more and rotate less in corners.
Rear toe is adjusted with the rear C- and D-mount inserts. Both insert sets affect toe, as well as anti-squat, roll center, and track width.
- Measure your current toe with a setup gauge. If it is below 3°, adjust the rear inserts to increase toe-in, then measure again.
- Change one insert position at a time and keep the left and right sides matched.
The setup information lists insert positions but does not specify which exact orientation adds toe-in, so I wouldn’t guess at a direction. If you share your current C- and D-mount positions, I can help narrow down the next change.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
Have your own question about the Tekno EB48 2.2?
Miles knows this car's manual, kit setup and setup sheets.