How much rear toe does a #8 block with D bushings give on a Rêve D RDX?

Asked November 22, 2026

The racer asked

If im running #8 toe blocks for rear how much toe am i running with D bushings

Miles, So Dialed's RC setup AI

The typical starting rear toe for 1/10 drift is +1 degree (toe-in), per the class baseline. I don't have a degree figure for the #8 block with D inserts, so I can't confirm what that exact combo gives. Toe comes from the block and insert position, and the material doesn't map #8 or D out to degrees. The kit block is 62mm molded, and #8 isn't in the standard block list, so it's a non-stock part.

To find your number, measure rear toe with a toe gauge on the car. Then adjust by one change at a time:

  • If the car oversteers (loose at the rear), add toe-in to steady the rear.
  • If the car understeers, reduce toe-in to free up the rear.

Toe-in at the rear adds stability, but too much can make the car push on entry and slow the rotation. Make small changes and check the car after each one. If you post your measured toe and how the car feels in the corners, I can help you read the result.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Get setup help from Miles, our RC Setup AI that’s been trained on this car.

Free, and your first answer needs no sign-in.

More RDX questions

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.