The racer asked
Gearing for clay oval medium size
Miles, So Dialed's RC setup AI
For your TLR 22S Dirt Late Model, the kit gearing uses an 84-tooth spur and 2.43 internal ratio. I need your motor’s turns or Kv to recommend a pinion for a medium clay oval; track size alone isn’t enough to choose gearing.
What motor are you running, in turns or Kv?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Dirt Late Model questions
Which roll center holes are best front and rear for TLR 22S Dirt Late Model?
There isn’t one best roll-center hole for every track. As a starting point, use the kit camber-link positions: front inner link Out, rear inner link In. Those are the 22S Dirt...
TLR 22S Dirt Late Model setup for asphalt parking lot oval, box-stock?
For a TLR 22S Dirt Late Model, start with the kit car and use the rubber-tire 1/10 Late Model oval baseline only for adjustments your box-stock rules allow. Those rules vary by...
What is a good ride height for asphalt on a TLR 22S Dirt Late Model?
For a TLR 22S Dirt Late Model, start at 15 mm front and 21 mm rear. That is a general 1/10 late-model baseline listed for all track types, not an asphalt-specific setting for this...
TLR 22S Dirt Late Model loose on entry and spins coming off corners?
Treat these as two separate problems: reduce entry oversteer first, then add rear grip on corner exit. Assuming the kit setup, try one change at a time so you can tell which phase...
How can I make my "cheated up" TLR 22S Dirt Late Model as fast as stock?
If you mean your 22S Dirt Late Model has been heavily modified, start by taking it back to the kit setup, then add changes back one at a time. More tuning parts do not...
What shock preload should I run on a TLR 22S Dirt Late Model for a high-bite oval?
There isn’t a numerical shock preload setting specified for the TLR 22S Dirt Late Model on high-bite oval. Use preload collars only to set ride height; a 1/10-scale Late Model...
