What left, cross and rear weights for a GFRP Mistress 2024?

Asked November 18, 2026

The racer asked

What weights should I scale it at, left, cross, rear?

Miles, So Dialed's RC setup AI

Start a 1/10 Late Model on rubber at 55% rear weight, 55% left weight, and 52% cross weight. The kit setup doesn't list weight numbers for this car, so these are the typical starting values for the class.

These targets set how the car balances at the start, and you reach them by moving batteries, the servo, and other parts. Change one target at a time and re-check the car after each move.

  • Rear weight: 55%, a rear bias that adds stability on throttle.
  • Left weight: 55%, the usual left-side bias for an oval, which helps the car stay planted in the turns.
  • Cross weight: 52%, slightly above 50%, for a planted car that still rotates.

Cross weight is the most sensitive of the three. Raising it tightens the car and reduces rotation, while lowering it loosens the car. If the car is tight everywhere, reduce cross by 0.5 to 1%. If it is loose everywhere, add 0.5 to 1%. Spring and ride height changes also shift cross weight, so check it again after any of those changes.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Get setup help from Miles, our RC Setup AI that’s been trained on this car.

Free, and your first answer needs no sign-in.

More Mistress 2024 questions

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.