The racer asked
Setup for Losi sprint car for low grip slick concrete oval racing
Miles, So Dialed's RC setup AI
For slick, low-grip concrete, start with soft grip: softer shock springs and damping, and a ride height that keeps the car from being pushed around. The only concrete run on file is S02 (Fast and Fun, Main B, finished 2). That car was tight through the corners and the left rear broke loose on exit, so treat it as a reference, not a finished setup.
Starting point from the kit and that run:
- Shock springs: Kit front is 10lb Purple and kit rear is 6lb Orange. Low grip favors softer springs, so try a softer rear spring before going softer up front.
- Shock oil: Kit front is 30wt and rear is 35wt. Keep these for now, since heavier oil costs grip on slick concrete.
- Front ride height: 18 mm, as in S02.
- Rear ride height: 15 mm, as in S02.
- Front toe: Kit is -1 degree (1 degree toe-out), which sits in the 0.5 to 1 degree toe-out range for smooth drivers.
- Rear tire: Losi Soft, as in S02.
- Rear wing position: Front, as in S02.
For the loose left rear on exit, move the left-rear spring stiffer. Stiffer left-rear calms the exit and cuts the rear breaking loose. Make that the only change, then run a few laps before anything else.
What to watch for: a stiffer left-rear can make the car tighter on entry, so if the car starts pushing, back that change out and look at the front. Tell me how the car feels on entry and on exit and I can narrow the next change.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Sprint Car questions
How do I add front grip on a TLR 22S Sprint Car?
To add front grip, soften the front springs or lighter the front shock oil, and move front toe toward toe-in. Both changes make the car turn in harder, so it will get looser on...
TLR 22S Sprint: shock oil for high-bite clay with stock springs?
For high-bite clay, try 300/550 cSt in the front shocks and 600/1000 cSt in the rears, in left/right order. With the stock springs, keep the 10 lb purple fronts and 6 lb orange...
Why is my TLR 22S Sprint loose on the hot line on clay dirt?
On the 22S Sprint, add rear grip first rather than changing steering. Assuming the kit setup, try one softer rear spring step, from the stock 6 lb orange spring to 5 lb red, and...
Should I limit shock travel on a TLR 22S Sprint Car?
Yes, but only when the track calls for it. On the 22S Sprint Car, the kit setup uses 0 mm internal limiters front and rear. Other driver setups also leave them at 0 mm on...
Base setup for TLR 22S on outdoor dry-slick clay?
The setup data doesn’t include a specific outdoor dry-slick clay baseline for the 22S. I’d start close to kit setup: 3,000 cSt diff, 30-weight front and 35-weight rear shock oil...
