The racer asked
Front grip
Miles, So Dialed's RC setup AI
To add front grip, soften the front springs or lighter the front shock oil, and move front toe toward toe-in. Both changes make the car turn in harder, so it will get looser on exit.
Front grip makes the front end bite more, so the car steers more and can get loose. If you want more grip without that, change one thing at a time.
- Front springs: Go softer than the kit 10lb Purple (#LOS-2604). Softer front springs add front bite. Kit options run from 4lb Brown up to 14lb Gold.
- Front shock oil weight: The kit is 30/30. Going thinner adds grip and quickens the response, while thicker oil calms the front end.
- Front toe: The kit is -1 degrees, which is toe-out. Move it toward toe-in (-0.5, then 0) to add front traction and calm the entry. Toe-out gives more turn-in rotation, but it can get twitchy.
- Front ride height: Lowering the front sharpens steering. Raising it calms the entry but can cause understeer.
If the car pushes on entry, soften the front springs first. If it gets too loose on exit after that, back off the front change and work on the rear instead. What symptom are you seeing: pushing on entry, or the car being too twitchy?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Sprint Car questions
What setup should I use for a TLR 22S sprint car on low‑grip slick concrete oval?
For slick, low-grip concrete, start with soft grip: softer shock springs and damping, and a ride height that keeps the car from being pushed around. The only concrete run on file...
TLR 22S Sprint: shock oil for high-bite clay with stock springs?
For high-bite clay, try 300/550 cSt in the front shocks and 600/1000 cSt in the rears, in left/right order. With the stock springs, keep the 10 lb purple fronts and 6 lb orange...
Why is my TLR 22S Sprint loose on the hot line on clay dirt?
On the 22S Sprint, add rear grip first rather than changing steering. Assuming the kit setup, try one softer rear spring step, from the stock 6 lb orange spring to 5 lb red, and...
Should I limit shock travel on a TLR 22S Sprint Car?
Yes, but only when the track calls for it. On the 22S Sprint Car, the kit setup uses 0 mm internal limiters front and rear. Other driver setups also leave them at 0 mm on...
Base setup for TLR 22S on outdoor dry-slick clay?
The setup data doesn’t include a specific outdoor dry-slick clay baseline for the 22S. I’d start close to kit setup: 3,000 cSt diff, 30-weight front and 35-weight rear shock oil...
