The racer asked
Good shock oil for high bit clay stock springs.
Miles, So Dialed's RC setup AI
For high-bite clay, try 300/550 cSt in the front shocks and 600/1000 cSt in the rears, in left/right order. With the stock springs, keep the 10 lb purple fronts and 6 lb orange rears.
Closest Team Losi bottle labels are:
- Front: 27.5wt left, 42.5wt right
- Rear: 45wt left, 80wt right
That is much heavier than the kit baseline of 30wt front and 35wt rear. The extra damping helps control suspension movement on a high-grip surface. Change oil only, then test the car; if it feels harsh or skips over bumps, reduce oil at the end that is losing grip.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Sprint Car questions
What setup should I use for a TLR 22S sprint car on low‑grip slick concrete oval?
For slick, low-grip concrete, start with soft grip: softer shock springs and damping, and a ride height that keeps the car from being pushed around. The only concrete run on file...
How do I add front grip on a TLR 22S Sprint Car?
To add front grip, soften the front springs or lighter the front shock oil, and move front toe toward toe-in. Both changes make the car turn in harder, so it will get looser on...
Why is my TLR 22S Sprint loose on the hot line on clay dirt?
On the 22S Sprint, add rear grip first rather than changing steering. Assuming the kit setup, try one softer rear spring step, from the stock 6 lb orange spring to 5 lb red, and...
Should I limit shock travel on a TLR 22S Sprint Car?
Yes, but only when the track calls for it. On the 22S Sprint Car, the kit setup uses 0 mm internal limiters front and rear. Other driver setups also leave them at 0 mm on...
Base setup for TLR 22S on outdoor dry-slick clay?
The setup data doesn’t include a specific outdoor dry-slick clay baseline for the 22S. I’d start close to kit setup: 3,000 cSt diff, 30-weight front and 35-weight rear shock oil...
