The racer asked
Clay dirt not hooking but not pushing steering gets a loose I the "hot line"
Miles, So Dialed's RC setup AI
On the 22S Sprint, add rear grip first rather than changing steering. Assuming the kit setup, try one softer rear spring step, from the stock 6 lb orange spring to 5 lb red, and leave the front unchanged for a test. The 22S kit uses 10 lb front and 6 lb rear springs.
A softer rear spring helps the tires stay planted over the clay. Since the car isn ’t pushing, avoid changes aimed at adding steering for now. Make one change at a time:
- If it gets loose under throttle on corner exit, add a little rear toe-in if your setup allows it. If the rear springs are different side to side, a softer right-rear spring is another exit-loose adjustment.
- If it’s loose through the middle, reduce rear stagger slightly.
- Check the tires before chasing more suspension changes. On the 22S-specific Pro-Line Dirt Oval tires, S3 is listed for dusty, hard-packed or changing tracks; M4 is aimed at moist, loamy conditions.
If the softer rear spring makes the car roll too much or feel sluggish, go back to 6 lb and try toe-in instead. Is it getting loose on entry, in the middle, or when you get on the throttle?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Sprint Car questions
What setup should I use for a TLR 22S sprint car on low‑grip slick concrete oval?
For slick, low-grip concrete, start with soft grip: softer shock springs and damping, and a ride height that keeps the car from being pushed around. The only concrete run on file...
How do I add front grip on a TLR 22S Sprint Car?
To add front grip, soften the front springs or lighter the front shock oil, and move front toe toward toe-in. Both changes make the car turn in harder, so it will get looser on...
TLR 22S Sprint: shock oil for high-bite clay with stock springs?
For high-bite clay, try 300/550 cSt in the front shocks and 600/1000 cSt in the rears, in left/right order. With the stock springs, keep the 10 lb purple fronts and 6 lb orange...
Should I limit shock travel on a TLR 22S Sprint Car?
Yes, but only when the track calls for it. On the 22S Sprint Car, the kit setup uses 0 mm internal limiters front and rear. Other driver setups also leave them at 0 mm on...
Base setup for TLR 22S on outdoor dry-slick clay?
The setup data doesn’t include a specific outdoor dry-slick clay baseline for the 22S. I’d start close to kit setup: 3,000 cSt diff, 30-weight front and 35-weight rear shock oil...
