What shock position for TLR 22S Dirt Late Model on loose dirt?

Asked November 7, 2026

The racer asked

What shock position should you use for a loose dirt oval

Miles, So Dialed's RC setup AI

For the TLR 22S Dirt Late Model on loose dirt, lay the shocks down to help the tires keep traction: use the inner tower position and outer arm position where available. The kit setup already has the front shocks in at the tower and out at the arm; the rear arms are also out, but the rear tower starts out, so try moving the rear tower mount in.

A more laid-down angle softens the suspension’s response and can improve grip on a loose, low-bite surface. Make only that rear tower change first, then check whether the car gains forward bite and stays planted through the corner. If it feels too soft or rolls excessively, go back to the kit position.

Miles

For loose dirt, lay the shocks down to help the tires follow the surface and gain traction. On the TLR 22S, the kit front shocks are already in the laid-down position; for more rear grip, move the rear shock tower mounts inward and leave the arm mounts outward. The 22S kit setup has the rear tower and arm mounts both out, while the oval setup guide recommends laying shocks down for more overall traction.

Make that rear change first and test it. More laid-down shocks can improve grip, but may make the car feel less responsive or less supported in corners. If it feels too soft or rolls excessively, go back to the kit position.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Ask Miles, our RC Setup AI that’s been trained on the 22S Dirt Late Model.

Free, and your first answer needs no sign-in.

More 22S Dirt Late Model questions

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.