The racer asked
What springs should I use for high grip crc black carpet? How do they compare to the stock springs?
Miles, So Dialed's RC setup AI
For a Yokomo RS2.0 on high-grip CRC black carpet, start with the stock #YS-RSS springs front and rear. I don’t have a confirmed RS2.0 spring-rate comparison or a specific high-grip spring set to recommend, so I wouldn’t assume a particular aftermarket spring is stiffer or a better match.
High grip can make the car traction-roll. If that ’s happening, try one step stiffer in front only and keep the stock rear springs; a stiffer front can reduce front-end roll and help the car stay on its tires. If it isn’t traction-rolling, keep the stock springs as your baseline rather than changing both ends preemptively.
The trade-off is that a stiffer front may reduce front grip and make the car push more. If you tell me whether it traction-rolls, pushes, or feels loose, I can suggest the next spring change.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RS2.0 questions
Will a 48T pinion clear the top deck on a Yokomo RS2.0?
I can't confirm from the data I have whether a 48T pinion clears the top deck on the RS2.0, so I can't give you a yes or no on that. Going from the kit 30T to a 48T is a large...
Is a 13T motor good for a Yokomo RS2.0?
If you mean a 13.5T brushless motor, yes, it can be a good choice for a Yokomo RS2.0 in club-level stock touring car racing. Whether it’s legal or competitive depends on your...
Yokomo RS2.0 asphalt setup with 21.5T motor?
Assuming a 21.5T Yokomo RS2.0 on medium-grip asphalt, start with about 5 mm front and 5.5 mm rear ride height, -1.5° front toe, and +3.5° rear toe. The 21.5T motor does not...
What are good droop base settings for carpet on a Yokomo RS2.0?
There isn’t a carpet-specific RS2.0 droop number available here, so I wouldn’t call any value a confirmed carpet baseline. For a consistent first measurement, use the RS2.0’s...
What's a good base setup for a Yokomo RS2.0 on high-grip indoor carpet?
There isn’t a high-grip-specific RS2.0 setup available, but this is a solid starting point based on RS2.0 carpet settings and a general touring-car carpet baseline: Ride height: 5...
